Engine - Tier 4 Final/EU Stage V
Engine Model
Cat® C7.1: configured for two emissions options
Net Power (SAE J1349:2011)
Net Power (ISO 9249:2007)
Emissions
Meets U.S. EPA Tier 4 Final/EU Stage V emission standards
Rated Speed
Gross Power (SAE J1995:2014)
Engine Power (ISO 14396:2002)
Peak Torque - 1,400 rpm
902 lb-ft @ 1400 rpm
1223 N·m
Torque Rise
Bore
Stroke
Displacement
High Idle Speed
Low Idle Speed
Maximum Altitude without Derating
Note
Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.
Engine - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA
Engine Model
Cat® C7.1: configured for two emissions options
Net Power (SAE J1349:2011)
Emissions
Brazil MAR-1 and China Nonroad Stage III, equivalent to U.S. EPA Tier 3/EU Stage IIIA
Rated Speed
Gross Power (SAE J1995:2014)
Engine Power (ISO 14396:2002)
Peak Torque - 1,400 rpm
749 lb-ft @ 1400 rpm
1016 N·m
Torque Rise
Bore
Stroke
Displacement
High Idle Speed
Low Idle Speed
Maximum Altitude without Derating
Note
Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.
Operating Specifications - Tier 4 Final/EU Stage V
Operating Weight
Transmission
Transmission Type
Cat Planetary Power Shift
Travel Speeds - Forward - First
Travel Speeds - Forward - Second
Travel Speeds - Forward - Third
Travel Speeds - Reverse - First
Travel Speeds - Reverse - Second
Travel Speeds - Reverse - Third
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit
Pilot operated LS valve with EH
Lift/Tilt System
Variable displacement piston
Maximum Flow at 2,200 rpm
Relief Valve Setting - Lift/Tilt
Pilot System
Open center, fixed displacement gear
Pilot Relief Valve Setting
Hydraulic System - Steering
Steering System - Circuit
Steering System - Pump
Piston – Variable Displacement
Maximum Flow at 2,200 rpm
Relief Valve Setting - Steering
Total Steering Angle
Steering Cycle Times - High Idle
Steering Cycle Times - Low Idle
Service Refill Capacities
Fuel Tank
Dimensions (Approximate)
Height - Top of Beacon
Service Refill Capacities
Diesel Exhaust Fluid Tank*
Dimensions (Approximate)
Height - Top of Cab Roof
Height - Top of Exhaust Pipe
Service Refill Capacities
Cooling Systems - Tier 4 Final/EU Stage V
Cooling System - Tier 3/Stage IIIA Equivalent
Dimensions (Approximate)
Height - Top of Hood
Service Refill Capacities
Engine Crankcase
Dimensions (Approximate)
Height to Top of Radiator Guard
Service Refill Capacities
Transmission
Dimensions (Approximate)
Ground Clearance to Hitch
Service Refill Capacities
Differential - Final Drives - Front
Dimensions (Approximate)
Ground Clearance to Transmission Guard
Service Refill Capacities
Differential - Final Drives - Rear
Dimensions (Approximate)
Ground Clearance to Bottom of Bumper
Centerline of Rear Axle to Bumper
Hitch to Centerline of Front Axle
Service Refill Capacities
Hydraulic Tank Only
Note
All non-road Tier 4 Final and Stage V diesel engines are required to use: – Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm for EPA and 10 ppm for EU (mg/kg) sulfur or less. Biodiesel blends up to B20 are acceptable when blended with 15 ppm for EPA and 10 ppm for EU (mg/kg) sulfur or less ULSD and when the biodiesel feedstock meets ASTM D7467 specifications. – Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specifications are required. – Diesel Exhaust Fluid (DEF) that meets all requirements defined in ISO 22241-1.
Dimensions (Approximate)
Wheel Base
Width over Platform
Height to Top of GPS Antenna
Overall Machine Length with Straight Blade
Overall Machine Length with EU Suppression
Axles
Front
Rear
Oscillation Angle
Braking System
Service Brakes
Single Disc Wet (Enclosed) 2 WHL
Parking Brake
Drum and Shoe, Spring Applied, Hydraulic Released
Sound Performance - Tier 4 Final/EU Stage V - Standard
Operator Sound Level (ISO 6396)
Machine Sound Level (ISO 6395)
Note (1)
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
Note (2)
The operator sound pressure level uncertainty is ± 2 dB(A)
Note (3)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Note (4)
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
Sound Performance - Tier 4 Final/EU Stage V - Suppression
Operator Sound Level (ISO 6396)
Machine Sound Level (ISO 6395)
Note (1)
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
Note (2)
The operator sound pressure level uncertainty is ± 2 dB(A)
Note (3)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Note (4)
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Standard
Operator Sound Level (ISO 6396)
Machine Sound Level (ISO 6395)
Note (1)
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
Note (2)
The operator sound pressure level uncertainty is ± 2 dB(A)
Note (3)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Note (4)
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Suppression
Operator Sound Level (ISO 6396)
Machine Sound Level (ISO 6395)
Note (1)
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
Note (2)
The operator sound pressure level uncertainty is ± 2 dB(A)
Note (3)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Note (4)
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
Sound Performance - Tier 4 Final/EU Stage V - Suppression EU
Machine Sound Level (ISO 6393)
Note (1)
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6393:2008. The measurement was conducted at the rated engine cooling fan speed.
Wheels
Weight
Outside Diameter
Drum Diameter
Drum Width
Tips per Row
Tips per Wheel
Replaceable
Width - Over Drums
Width Between Drums
Tip Height
Blades
Capacity
Overall Width
Height
Digging Depth
Ground Clearance
Maximum Tilt
Turning Radius - Outside Corner of Blade
Turning Radius - Inside Face of Pusharm
Weight
Total Operating Weight
Standard Equipment
NOTE
POWER TRAIN
ELECTRICAL
OPERATOR ENVIRONMENT
TIRES, RIMS AND WHEELS
GUARDS
FLUIDS
OTHER STANDARD EQUIPMENT
STANDARD ATTACHMENTS – HYDRAULICS
STANDARD ATTACHMENTS – OPERATOR ENVIRONMENT
STANDARD ATTACHMENTS – POWER TRAIN
STANDARD ATTACHMENTS – SPECIAL ARRANGEMENTS
STANDARD ATTACHMENTS – ELECTRICAL
STANDARD ATTACHMENTS – FUEL SYSTEMS
STANDARD ATTACHMENTS – TECHNOLOGY PRODUCTS
STANDARD ATTACHMENTS – CLEANER BARS
STANDARD ATTACHMENTS – BLADES
Optional Equipment
NOTE
OPERATOR ENVIRONMENT
TECHNOLOGY PRODUCTS
OTHER ATTACHMENTS
FLUIDS
STARTING AIDS
MISCELLANEOUS