Engine
Net Power - ISO 9249/SAE J1349
Bore
Stroke
Displacement
Engine Power AWD (ISO 14396)
Maximum Torque
Derating Altitude
Engine Model
Torque Rise - ISO 9294
Note (1)
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture. Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler, and alternator. Power as declared per ISO 14396.
Emissions
Meets U.S. EPA Tier 4 Final, EU Stage V emission standards
Weights
Operating Weight - Typically Equipped
Machine Weight
All-Wheel Drive (AWD) Weight
Moldboard
Blade Width
Dimensions
Length of Machine*
Width
Maximum Height
Note
*Typically equipped with push block and ripper.
Moldboard
Cutting Edge Width
End Bit - Width
Arc Radius
Blade Height
Throat Clearance
Blade Range
Moldboard Sideshift - Right
Circle Centershift - Left
Blade Tip Range - Forward
Circle Centershift - Right
Moldboard Sideshift - Left
Maximum Lift Above Ground
Blade Tip Range - Backward
Maximum Depth of Cut
Service Refill Capacities
Engine Crankcase
Hydraulic System
Fuel Tank
Diesel Exhaust Fluid Tank (Tier 4 Only)
Circle Drive without Slip Clutch
Transmission
Cooling System
Circle Drive with Slip Clutch
Sustainability
Recyclability
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas.
Weights
Note
* Typically equipped machine weight is calculated with full fluids, ROPS HVAC CAB, 12' basic blade, push plate, ripper, 14-24 tires on multi-piece rims and operator.
Operating Weight - Typically Equipped - Front Axle
Power Train
Transmission
Countershaft Torque, Converter Powershift
Weights
Operating Weight - Typically Equipped - Rear Axle
Operating Specifications
Steering Range - Left/Right
Power Train
Forward/Reverse Gears
Operating Specifications
Articulation Angle - Left/Right