HomeMachines/EquipmentNew MachinesCat 907 Compact Wheel Loader

Cat 907 Compact Wheel Loader

360 View Video

Product Description

Cat® wheel loaders set the standard for productivity, fuel efficiency and operator comfort. The Cat 907 Compact Wheel Loader has a high torque C2.8 engine that works in conjunction with an intelligent hystat power train to deliver exceptional fuel efficiency. “Shift on the go” locking differentials and hydrostatic transmission provide smooth and powerful operation while increasing the efficiency of machine cycles.

Specifications
Us
Metric
Engine
Maximum Gross Power
74.7 hp
55.7 kW
Engine Model
Cat C2.8*
Maximum Engine Speed
2550 rpm
Maximum Gross Power - Rated Engine Speed
2400 r/min
2400 r/min
Maximum Gross Power - SAE J1995
74.7 hp
55.7 kW
Maximum Gross Power - ISO 14396
74.3 hp
55.4 kW
Maximum Gross Power - ISO 14396 (metric)
75.3 mhp
75.3 mhp
Rated Net Power - Rated Engine Speed
2400 r/min
2400 r/min
Rated Net Power - SAE J1349
72.7 hp
54.2 kW
Rated Net Power - ISO 9249
72.1 hp
53.8 kW
Rated Net Power - 2,400 rpm - ISO 9249 (metric)
73.1 mhp
73.1 mhp
Maximum Gross Torque - SAE J1995
222 lb/ft
300 N·m
Maximum Gross Torque - ISO 14396
221 lb/ft
300 N·m
Maximum Net Torque - SAE J1349
218 lb/ft
296 N·m
Maximum Net Torque - ISO 9249
217 lb/ft
295 N·m
Displacement
171 in³
2.8 l
Bore
3.54 in
90 mm
Stroke
4.33 in
110 mm
Note
*Meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Note (1)
Advertised power is tested per the specified standard in effect at the time of manufacture.
Note (2)
Net power advertised is the power available at the flywheel.
Note (3)
#Maximum gross and net torque measured at 1,600 rpm.
Weights
Operating Weight
12765 lb
5792 kg
Buckets
Bucket Capacities
0.75-1.55 m³ (1.0-2.0 yd³)
Bucket Capacities - General Purpose
0.80-1.35 m³ (1.0-1.7 yd³)
Bucket Capacities - Light Material
1.25-1.55 m³ (1.6-2.0 yd³)
Multi-Purpose
0.75-1.1 m³ (1.0-1.4 yd³)
Note
Bucket selection must be made with an understanding of the material density and application to ensure machine stability is maintained within the tipping loads stated per model and configuration.
Note (1)
Bucket capacities stated include BOCE, in line with ISO 7546.
Service Refill Capacities
Fuel Tank
24 Gal
90 l
Cooling System
3.2 Gal
12 l
Engine Crankcase
2.3 Gal
8.8 l
Axles - Front Center Differential
2.3 Gal
8.8 l
Axles - Rear Center Differential
2.3 Gal
8.8 l
Hydraulic System - Including Tank
17.8 Gal
67.5 l
Hydraulic Tank
11.8 Gal
44.6 l
Transmission
0.6 Gal
2.4 l
Note
No Diesel Exhaust Fluid (DEF) fluid needed on this size engine.
Axles
Front
Fixed (standard), Locking Differential (optional)
Rear
Fixed (standard), Locking Differential (optional)
Note
Oscillation of ±11 degrees via hitch between front and rear frames.
Steering
Steering Articulation Angle - Each Direction
39 °
39 °
Maximum Flow - Steering Pump
12.3 gpm
46.7 L/min
Maximum Working Pressure - Steering Pump
3336 psi
23000 kPa
Steering Cycle Times – (full left to full right) – at High Idle
2.8 s
2.8 s
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
3.25 turns or 4.00 turns
Transmission
Forward and Reverse - Speed Range Creep#
6 mile/h
10 km/h
Forward and Reverse - Speed Range 1*
6 mile/h
10 km/h
Forward and Reverse - Speed Range 2** - High Speed
10.5 mile/h
17 km/h
Forward and Reverse - Speed Range 2** - Standard
12 mile/h
20 km/h
Forward and Reverse - Speed Range 3***
25 mile/h
40 km/h
Note
#Factory default shown, can be adjusted to any speed up to 19 km/h (12 mph).
Note (1)
*Creep function not available in this gear or above.
Note (2)
**Max speed dependent on model and configuration (standard vs. high speed transmission).
Note (3)
***Reverse is 30 km/h (19 mph).
Tires
Tire Size - Standard
*405/70 R18 SPT9
Tire Size - Optional
405/70 R18 Powerloads
Tire Size - Optional (1)
340/80 R18 XMCL/Bibload
Tire Size - Optional (2)
340/80 R18 TRI 2
Tire Size - Optional (3)
40X14-20 TL, SM/TR
Tire Size - Optional 4
340/80 R18 Duraforce
Note
*This tire has been used for all dimension, stability and performance data.
Note (1)
Other tire choices are available. Contact your Cat dealer for details.
Note (2)
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Cab
ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level II
Note (1)
Canopy and cab, Rollover Protective Structures (ROPS) are available worldwide. Canopy not available in EU.
Note (2)
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 71 dB(A).
Note (3)
*Measurements were conducted with the cab doors and windows closed.
Note (4)
The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 101 dB(A). 99 dB(A) Low Sound – Option available.
Loader Hydraulic System
Main Relief - 1st Auxiliary (3rd slice)
3408 psi
23500 kPa
Main Relief - 1st Auxiliary (3rd slice) - Standard Flow*
21 gpm
80 L/min
Main Relief - 1st Auxiliary (3rd slice) - High Flow*
32 gpm
120 L/min
Main Relief - 2nd Auxiliary (4th slice)
3408 psi
23500 kPa
Main Relief - 2nd Auxiliary (4th slice) - Flow
12 gpm
45 L/min
Hydraulic Cycle Time - Rackback
2.2 s
2.2 s
Hydraulic Cycle Time - Lift
5 s
5 s
Hydraulic Cycle Time - Dump
1.6 s
1.6 s
Hydraulic Cycle Time - Float Down
2.8 s
2.8 s
Note
* Maximum flow stated, actual flow delta could be 6% from data shown. Also adjustable from 20% to 100% of maximum flow through display.
Dimensions - With HPL-V Coupler - Approximate#
Height: Ground to Cab**
8.5 ft
2592 mm
Height: Ground to Beacon**
9.08 ft
2774 mm
Height: Ground Axle Center**
1.58 ft
480 mm
Height: Ground Clearance**
1 ft
300 mm
Length: Overall*
17.58 ft
5366 mm
Length: Rear Axle to Bumper
4.58 ft
1391 mm
Length: Hitch to Front Axle
3.58 ft
1085 mm
Length: Wheel Base
7.08 ft
2170 mm
Length: Front Axle to Front of Coupler
3.5 ft
1065 mm
Clearance: Bucket at 45° *
8.25 ft
2505 mm
Clearance: Load over Height**
9.5 ft
2902 mm
Clearance: Level Bucket**
9.92 ft
3037 mm
Height: Bucket Pin**
10.67 ft
3251 mm
Height: Overall**
13.5 ft
4122 mm
Reach: Bucket at 45° *
2.33 ft
714 mm
Carry Height: Bucket Pin
1.08 ft
324 mm
Dig Depth**
0.33 in
113 mm
Width: Bucket
6.75 ft
2045 mm
Width: Tread Center
4.67 ft
1420 mm
Turning Radius: Over Bucket
14.75 ft
4489 mm
Width: Over Tires
6.07 ft
1848 mm
Turning Radius: Outside of Tires
12.92 ft
3925 mm
Turning Radius: Inside of Tires
6.75 ft
2057 mm
Rack Angle at Full Lift
56°
Dump Angle at Full Lift
45°
Rack Angle at Carry
51°
Departure Angle - Degrees
30°
Articulation Angle - Degrees
39°
Operating Weight: Bucket ^
12689 lb
5756 kg
Tipping Load - Straight - ISO 14397-1 †
9773 lb
4433 kg
Tipping Load - Full Turn - ISO 14397-1 †
8235 lb
3735 kg
Operating Weight: Carriage and Tines ^^
12220 lb
5543 kg
Tipping Load - Straight †
7807 lb
3541 kg
Tipping Load - Full Turn †
6569 lb
2980 kg
80% of Tip: Firm and Level EN474-3 ††
5255 lb
2384 kg
Note (1)
*Vary with bucket
Note (2)
**Vary with tire
Note (3)
^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL),1.05 m3 (1.4 yd3) general purpose bucket.
Note (4)
^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class II carriage, 1220 mm (4 ft) tines (500 mm [20 in] load center).
Note (5)
†Full compliance to ISO 14397-1 (2007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing.
Note (6)
††Full compliance to EN474-3 and SAE J1197.
Note (7)
#HPL-A weight, tipping and rated loads are within 1% of the HPL-V.
Note (8)
Dimensions listed are for a machine configured with standard cab, heater, 20 km/h (12 mph), standard guarding, 80 kg (176 lb) operator, full fluids, SPT9 405/70 R18 tires and 1.05 m3 (1.4 yd3) general purpose bucket with bolt-on cutting edge or a class II fork carriage and tines, (tire supplier variability can impact dimensions by 2%).
Note (9)
Note: Goodyear POWERLOAD® tires can add up to approximately 140 kg (305 lb) to the full turn tip load and reduce vertical height by approximately 25 mm (1 in) compared to SPT9.
Dimensions - With SSL Coupler - Approximate
Height - Ground to Cab
8.5 ft
2591 mm
Height: Ground to Beacon**
9.08 ft
2774 mm
Height: Ground Axle Center**
1.58 ft
480 mm
Height - Ground Clearance
1 ft
300 mm
Length - Overall with Bucket
18.17 ft
5525 mm
Length: Rear Axle to Bumper
4.58 ft
1391 mm
Length: Hitch to Front Axle
3.58 ft
1085 mm
Length - Wheel Base
7.08 ft
2170 mm
Length: Front Axle to Front of Coupler
4.33 ft
1316 mm
Clearance - Bucket at 45°
7.83 ft
2392 mm
Clearance: Load over Height**
9.5 ft
2902 mm
Clearance - Level Bucket
9.92 ft
3028 mm
Height - Bucket Pin
10.67 ft
3251 mm
Height: Overall**
13.83 ft
4212 mm
Reach - Bucket at 45°
2.67 ft
813 mm
Carry Height: Bucket Pin
1.17 ft
346 mm
Dig Depth
3 in
85 mm
Width - Bucket
6.75 ft
2045 mm
Width - Tread Center
4.67 ft
1420 mm
Turning Radius - Over Bucket
15 ft
4563 mm
Width - Over Tires
6.08 ft
1848 mm
Turning Radius: Outside of Tires
12.92 ft
3925 mm
Turning Radius - Inside Tire
6.75 ft
2057 mm
Rack Angle at Full Lift
51°
Dump Angle at Full Lift
50°
Rack Angle at Carry
46°
Departure Angle - Degrees
30°
Articulation Angle - Degrees
39°
Operating Weight: Bucket ^
12897 lb
5842 kg
Tipping Load – Straight – ISO 14397-1 †
8653 lb
3925 kg
Tipping Load – Full Turn – ISO 14397-1 †
7257 lb
3292 kg
Operating Weight: Carriage and Tines ^^
12414 lb
5631 kg
Tipping Load - Straight †
7416 lb
3364 kg
Tipping Load - Full Turn †
6266 lb
2842 kg
80% of Tip: Firm and Level EN474-3 ††
5013 lb
2274 kg
Note (1)
*Vary with bucket
Note (2)
**Vary with tire
Note (3)
^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL),1.05 m3 (1.4 yd3) general purpose bucket.
Note (4)
^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class II carriage, 1220 mm (4 ft) tines (500 mm [20 in] load center).
Note (5)
†Full compliance to ISO 14397-1 (2007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing.
Note (6)
††Full compliance to EN474-3 and SAE J1197.
Note (7)
#HPL-A weight, tipping and rated loads are within 1% of the HPL-V.
Note (8)
Dimensions listed are for a machine configured with standard cab, heater, 20 km/h (12 mph), standard guarding, 80 kg (176 lb) operator, full fluids, SPT9 405/70 R18 tires and 1.05 m3 (1.4 yd3) general purpose bucket with bolt-on cutting edge or a class II fork carriage and tines, (tire supplier variability can impact dimensions by 2%).
Note (9)
Note: Goodyear POWERLOAD® tires can add up to approximately 140 kg (305 lb) to the full turn tip load and reduce vertical height by approximately 25 mm (1 in) compared to SPT9.
Sustainability
Recyclability
93%
Standard/Optional

Standard Equipment

ELECTRICAL
HYDRAULICS
OPERATOR ENVIRONMENT
OTHER
POWER TRAIN

Optional Equipment

ELECTRICAL
HYDRAULICS
OPERATOR STATION
OTHER
POWER TRAIN
888-702-0073 Email Us Download Product Brochure Understanding Your Finance Options

Available Used

CAT CAT BHL QUICK COUPLER, CASE BOTTOM
Serial Number 26715902
CAT CAT H160S HAMMER
Serial Number HWY00208
CAT CAT HM210 FLAIL MOWER
Serial Number WFM00410
OTHER US MFGRS CAT NG WINDOW SCREEN HEA
Serial Number MC-000068509
CAT CAT.310.24IN.BUCKET
Serial Number 22207PB30001
CAT CATERPILLAR 12 FOOT SNOW PUSHER
Serial Number 2322CPB20010
CAT CATERPILLAR 12 FOOT SNOW PUSHER
Serial Number 2322CPB20015
CAT CATERPILLAR 12 FOOT SNOW PUSHER
Serial Number 23236PB20022
CAT CATERPILLAR 301 16INCH DIG BUCKET
Serial Number 44227BK20448
CAT CATERPILLAR 307-309 PIN LOCK COUPLER
Serial Number EX221201752
CAT CATERPILLAR 320-325 42INCH SEVERE DUTY BUCKET
Serial Number C9413487
CAT CATERPILLAR 320-325 42INCH SEVERE DUTY BUCKET
Serial Number XC758186
CAT CATERPILLAR 336-340 54INCH SEVERE DUTY BUCKET
Serial Number XC755763
CAT CATERPILLAR 72IN DITCH CLEANING BUCKET
Serial Number C9407885
CAT CATERPILLAR 72IN GP BUCKET
Serial Number A4219BK23147
CAT CATERPILLAR CV117 COMPACTOR
Serial Number DTM00398
CAT CATERPILLAR GLL60 LOG LOADING GRAPPLE
Serial Number LXP00200
CAT CATERPILLAR GLL60 LOG LOADING GRAPPLE
Serial Number LXP00210
CAT CATERPILLAR GSH425 1.5 CYD ORANGE PEEL GRAPPLE
Serial Number B8N00266
CAT CATERPILLAR H140GC HAMMER
Serial Number WHC00389
CAT CATERPILLAR MP332 MULTI-PROCESSOR
Serial Number MW200239
CAT CATERPILLAR PC305 COLD PLANER
Serial Number DZK00795
CAT CATERPILLAR S3070 SHEAR
Serial Number LX500136
View All

Your time is valuable, and your business, much appreciated. Thanks for visiting our website. You can count on us for realistic answers to your equipment needs, state-of-the-art technology, experienced application specialists, flexible acquisition options and customized financing. We look forward to answering your questions.

Connect With Us!