Engine
Engine Power @ 1,600 rpm - ISO 14396:2002
Engine Model
Gross Power @ 1,600 rpm - SAE J1995:2014
Net Power @ 1,600 rpm - ISO 9249:2007, SAE J1349:2011
Net Power - ISO 9249
Engine Torque @ 1,200 rpm - ISO 14396:2002
Gross Torque @ 1,200 rpm – SAE J1995:2014
Net Torque @ 1,200 rpm - ISO 9249:2007, SAE J1349:2011
Bore - ISO 9249
Stroke
Displacement
Note (1)
Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Tier 5, China Nonroad Stage IV, and Japan 2014 (Tier 4 Final) emission standards.
Note (2)
The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.
Note (3)
Cat engines are compatible with the following renewable, alternative, and biodiesel* fuels that reduce greenhouse gases on a lifecycle basis: • Up to B20 biodiesel (FAME) ** • Up to 100% HVO and GTL renewable fuels
Weights
Operating Weight*
Note (1)
* For 4.0 m3 (5.2 yd3) general purpose bucket with BOCE.
Note (2)
* Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Operating Specifications
Static Tipping Load - Full 37° Turn - With Tire Deflection
Static Tipping Load - Full 37° Turn - No Tire Deflection
Breakout Force
Note (1)
* For 4.0 m3 (5.2 yd3) general purpose bucket with BOCE.
Note (2)
* Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Buckets
Bucket Capacities
3.2 - 7.1 m³ (4.25 - 9.25 yd³)
Sound
With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)
With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008)
With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013)
Note (1)
*Distance of 15 m (49.2 ft), moving forward in second gear ratio.
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)**
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)**
Note (2)
** For machines in European Union countries and in countries that adopt the “EU Directives”.
Note (3)
*** European Union Directive “2000/14/EC” as amended by “2005/88/EC”.
Transmission
Forward - 1
Reverse - 1
Forward - 2
Reverse - 2
Forward - 3
Reverse - 3
Forward - 4
Reverse - 4
Note
Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 826 mm (32 in) roll radius.
Service Refill Capacities
Fuel Tank
DEF Tank
Cooling System
Crankcase
Transmission
Differential - Final Drives - Front
Differential - Final Drives - Rear
Hydraulic Tank
Hydraulic System
Implement Pump Type
Variable Displacement Piston, Load Sensing
Implement System - Maximum Flow @ 2,275 rpm
Implement System - Maximum Operating Pressure
Implement System - Maximum Flow 3rd Function
Implement System - Maximum Operating Pressure 3rd Function
Hydraulic Cycle Time - Raise from Carry Position
Loader Hydraulic System
Hydraulic Cycle Time - Dump, at Maximum Raise
Hydraulic System
Hydraulic Cycle Time - Lower, Empty, Float Down
Hydraulic Cycle Time - Total Cycle Time
Cab
ROPS/FOPS
ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards
Brakes
Brakes
Brakes meet ISO 3450:2011 standards
Dimensions
B-Pin Height
Centerline of Rear Axle to Edge of Counterweight
Wheel Base
Centerline of Rear Axle to Hitch
Rack Back - Maximum Lift
Rack Back - Carry
Rack Back - Ground
Lift Arm Clearance
Height - Top of Hood
Height - Top of Exhaust Pipe
Height - Top of ROPS
Ground Clearance
Sustainability
Recyclability
Standard Equipment
NOTE
OPERATOR ENVIRONMENT
POWER TRAIN
LINKAGE
HYDRAULICS
ELECTRICAL
ADDITIONAL EQUIPMENT
Optional Equipment
NOTE
OPERATOR ENVIRONMENT
POWER TRAIN
LINKAGE
HYDRAULICS
ELECTRICAL
ADDITIONAL EQUIPMENT
OPTIONAL EQUIPMENT - NOTE