HomeMachines/EquipmentNew Machines926 Small Wheel Loader

926 Small Wheel Loader

360 View Video

Product Description

The 926 Small Wheel Loader sets the standard for productivity, fuel efficiency, operator comfort and low operating costs. Experience the industry benchmark.

Specifications
Us
Metric
Engine
Rated Gross Power - SAE J1995
170 hp
127 kW
Engine Model
Cat C7.1*
Performance Mode
Automatic
Rated Gross Power - Rated Engine Speed
1800 r/min
1800 r/min
Rated Gross Power - SAE J1995 (DIN)
172 mhp
172 mhp
Rated Engine Power - ISO 14396
168 hp
125 kW
Rated Engine Power - ISO 14396 (DIN)
170 mhp
170 mhp
Rated Net Power - SAE J1349 at Minimum Fan Speed
165 hp
123 kW
Rated Net Power - ISO 9249 at Minimum Fan Speed
165 hp
123 kW
Rated Net Power - ISO 9249 (DIN) at Minimum Fan Speed
167 mhp
167 mhp
Maximum Gross Torque - Engine Speed
1400 r/min
1400 r/min
Maximum Gross Torque - SAE J1995
608 ft·lbf
824 N·m
Maximum Gross Torque - ISO 14396
601 ft·lbf
815 N·m
Maximum Net Torque - SAE J1349
593 ft·lbf
804 N·m
Maximum Net Torque - ISO 9249
595 ft·lbf
807 N·m
Displacement
427 in³
7.01 l
Bore
4 in
105 mm
Stroke
5 in
135 mm
Note
*Meets U.S EPA Tier 4 Final, EU Stage V off-highway, and Japan 2014 emission standards.
Note (1)
Advertised power is tested per the specified standard in effect at the time of manufacture
Note (2)
Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
Note (3)
No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Weights
Operating Weight
27972 lb
12688 kg
Operating Weight - High Lift
28767 lb
13049 kg
Buckets
Bucket Capacities
1.9-5.0 m3 (2.5-6.5 yd3)
Steering
Steering Cylinder - Bore Diameter
2.8 in
70 mm
Steering Cylinder - Rod Diameter
1.6 in
40 mm
Steering Cylinder - Stroke
17.2 in
438 mm
Maximum Flow - Steering Pump
34 gpm
130 L/min
Maximum Working Pressure - Steering Pump
3500 psi
24130 kPa
Steering Cycle Times (Full Left to Full Right) - Minimum RPM: Pump Flow Limited
2.8 s
2.8 s
Steering Cycle Times (Full Left to Full Right) - Maximum RPM: 90 RPM Steering Wheel Speed
2.4 s
2.4 s
Loader Hydraulic System
Maximum Flow - Implement Pump
40 gpm
150 L/min
Maximum Flow - Implement Pump - 3rd Function Maximum Flow*
40 gpm
150 L/min
Maximum Flow - Implement Pump - 4th Function Maximum Flow*
40 gpm
150 L/min
Maximum Working Pressure - Implement Pump
3771 psi
26000 kPa
Relief Pressure - Tilt Cylinder
4061 psi
28000 kPa
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure
3771 psi
26000 kPa
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure
4061 psi
28000 kPa
Lift Cylinder: Standard Lift Linkage - Bore Diameter
1.3 in
110 mm
Lift Cylinder: Standard Lift Linkage - Rod Diameter
2.4 in
60 mm
Lift Cylinder: Standard Lift Linkage - Stroke
28.7 in
728 mm
Tilt Cylinder: Standard Lift Linkage - Bore Diameter
5.5 in
140 mm
Tilt Cylinder: Standard Lift Linkage - Rod Diameter
3 in
75 mm
Tilt Cylinder: Standard Lift Linkage - Stroke
20.3 in
516 mm
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift
5.5 s
5.5 s
Hydraulic Cycle Time - Dump (at Maximum Lift Height)
1.5 s
1.5 s
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level
2.6 s
2.6 s
Hydraulic Cycle Time - Total Cycle Time
9.6 s
9.6 s
Note
*3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped.
Service Refill Capacities
Fuel Tank
51.5 gal (US)
195 l
Cooling System
7.9 gal (US)
30 l
Engine Crankcase
5.3 gal (US)
20 l
Transmission - Gear Box
2.2 gal (US)
8.5 l
Front Axles
6.9 gal (US)
26 l
Rear Axles
6.6 gal (US)
25 l
Hydraulic System - Including Tank
42.3 gal (US)
160 l
Hydraulic Tank
23.8 gal (US)
90 l
Diesel Exhaust Fluid (DEF) Tank
5 gal (US)
19 l
Note
DEF used in Cat systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1:2019.
Transmission
Forward and Reverse - Range 1*
1-13 km/h (0.6-8 mph)
Forward and Reverse - Range 2
8 mile/h
13 km/h
Forward and Reverse - Range 3
17 mile/h
27 km/h
Forward and Reverse - Range 4
25 mile/h
40 km/h
Note
*Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph).
Tires
Standard Size
20.5 R25, radial (L-3)
Other Choices Include
20.5 R25, radial (L-2), 20.5 R25, radial (L-5), 20.5-25 12PR (L-2), 20.5-25 12PR (L-3), 20.5-25 16PR (L-5), 17.5 R25, radial (L-2), 17.5 R25, radial (L-3), 17.5 R25, radial (L-5), 550/65 R25 radial (L-3), Skidder/Agriculture
Note (1)
Other tire choices are available. Contact your Cat dealer for details.
Note (2)
In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
Note (3)
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Cab
ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 LEVEL II
Axles
Front
Fixed; Locking differential (standard)
Rear
Oscillating ± 11 degrees; Open differential (standard); Limited slip differential (optional)
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent of 2.717 metric tonnes (2.99 tons).
Sound
Operator Sound Pressure (ISO 6396:2008)
68 dB(A)
68 dB(A)
Average Exterior Sound Pressure (ISO 6395:2008)
101 dB(A)
101 dB(A)
Note (1)
European Union Directive 2000/14/EC and UK Noise Regulation 2001 No. 1701.
Sustainability
Recyclability
95%
Dimensions with Bucket - Standard Lift
Height - Ground to Cab**
10.92 ft
3340 mm
Height - Ground to Beacon**
12.17 ft
3707 mm
Height - Ground to Axle Center**
2.25 ft
685 mm
Height - Ground Clearance**
1.33 ft
397 mm
Length - Overall*
24.25 ft
7388 mm
Length - Rear Axle to Bumper
6.42 ft
1958 mm
Length - Hitch to Front Axle
4.92 ft
1500 mm
Length - Wheel Base
9.83 ft
3000 mm
Clearance - Bucket at 45°*
9.42 ft
2881 mm
Clearance - Load over Height**
11 ft
3351 mm
Clearance - Level Bucket**
11.75 ft
3576 mm
Height - Bucket Pin**
12.83 ft
3903 mm
Height - Overall**
16.67 ft
5072 mm
Reach - Bucket at 45°*
3.08 ft
928 mm
Carry Height - Bucket Pin
1.25 ft
382 mm
Dig Depth**
3.9 in
100 mm
Width - Bucket
8.33 ft
2550 mm
Width - Tread Center
6.33 ft
1930 mm
Turning Radius - Over Bucket
19.33 ft
5903 mm
Width - Over Tires
8.33 ft
2540 mm
Turning Radius - Outside of Tires
17.75 ft
5402 mm
Turning Radius - Inside of Tires
9.33 ft
2851 mm
Rack Angle at Full Lift
53 °
53 °
Dump Angle at Full Lift
50 °
50 °
Rack Angle at Carry
41 °
41 °
Departure Angle
33 °
33 °
Articulation Angle
40 °
40 °
Operating Weight
27972 lb
12688 kg
Note (1)
*Vary with bucket.
Note (2)
**Vary with tire.
Note (3)
Dimensions listed are for a machine configured with 1.9 m³ (2.5 yd³) general purpose Fusion™ bucket, bolt-on cutting edge, standard counterweights, additional guarding, 80 kg (176 Ib) operator and 20.5 R25 (L-3) XHA2 tires.
Dimensions with Bucket - High Lift
Height - Ground to Cab**
10.92 ft
3340 mm
Height - Ground to Beacon**
12.17 ft
3707 mm
Height - Ground to Axle Center**
2.25 ft
685 mm
Height - Ground Clearance**
1.33 ft
397 mm
Length - Overall*
26.5 ft
8065 mm
Length - Rear Axle to Bumper
6.42 ft
1958 mm
Length - Hitch to Front Axle
4.92 ft
1500 mm
Length - Wheel Base
9.83 ft
3000 mm
Clearance - Bucket at 45°*
11.08 ft
3378 mm
Clearance - Load over Height**
11.67 ft
3550 mm
Clearance - Level Bucket**
13.33 ft
4073 mm
Height - Bucket Pin**
14.42 ft
4400 mm
Height - Overall**
18.25 ft
5569 mm
Reach - Bucket at 45°*
4.17 ft
1261 mm
Carry Height - Bucket Pin
1.92 ft
582 mm
Dig Depth**
5.3 in
135 mm
Width - Bucket
8.33 ft
2550 mm
Width - Tread Center
6.33 ft
1930 mm
Turning Radius - Over Bucket
20.42 ft
6226 mm
Width - Over Tires
8.33 ft
2540 mm
Turning Radius - Outside of Tires
17.75 ft
5402 mm
Turning Radius - Inside of Tires
9.33 ft
2851 mm
Rack Angle at Full Lift
51 °
51 °
Dump Angle at Full Lift
49 °
49 °
Rack Angle at Carry
47 °
47 °
Departure Angle
33 °
33 °
Articulation Angle
40 °
40 °
Operating Weight
28787 lb
13049 kg
Note (1)
*Vary with bucket.
Note (2)
**Vary with tire.
Note (3)
Dimensions listed are for a machine configured with 1.9 m³ (2.5 yd³) general purpose Fusion™ bucket, bolt-on cutting edge, standard counterweights, additional guarding, 80 kg (176 Ib) operator and 20.5 R25 (L-3) XHA2 tires.
Standard/Optional

Standard Equipment

NOTE: Not all features are available in all regions.
OPERATOR ENVIRONMENT
POWER TRAIN
HYDRAULICS
ELECTRICAL
OTHER

Optional Equipment

NOTE: Not all features are available in all regions.
OPERATOR ENVIRONMENT
POWER TRAIN
HYDRAULICS
ELECTRICAL
OTHER OPTIONAL EQUIPMENT
888-702-0073 Email Us Download Product Brochure Understanding Your Finance Options

Available Used

CAT 926
Serial Number K8E01963
CAT 926
Serial Number K8E01135
CAT 926
Serial Number K8E00977
CAT 926-930M ISO QUICK COUPLER
Serial Number MC-000085672
CAT 926M
Serial Number W5L01548C
CAT 926M
Serial Number W5L01543C
CAT 926M
Serial Number W5L01546C
CAT 926M
Serial Number W5L00829
PJB INDUSTRIES 926M VOLVO STYLE COUPLER
Serial Number MC-000008859
View All

Your time is valuable, and your business, much appreciated. Thanks for visiting our website. You can count on us for realistic answers to your equipment needs, state-of-the-art technology, experienced application specialists, flexible acquisition options and customized financing. We look forward to answering your questions.

Connect With Us!