Engine
Gross Power - SAE J1995
Engine Model
Net Power - SAE J1349
Rated Speed
Emissions
U.S. EPA Compliant. Where applicable, the Cat C175-20 engine is compliant with U.S. EPA emission standards.Tier 4 engine option available to meet Tier 4 Final emission standards.
Bore
Stroke
Displacement
Note (1)
Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator.
Note (2)
U.S. EPA Tier 4 Final available for applicable markets.
Note (3)
High Altitude Low Maintenance Ratio Engine Configuration (4x4) option available.
Weights - Approximate
Nominal Rated Payload
Rated Gross Machine Weight
Chassis Weight
Body Weight
Note (1)
Consult your tire manufacturer for maximum tire load
Note (2)
Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires.
Note (4)
Tier 4 Chassis Weight: 486263 lb (220565 kg)
Weight Distributions - Approximate
Front Axle - Empty
Rear Axle - Empty
Front Axle - Loaded
Rear Axle - Loaded
Note
Weight distributions optimized with Cat body.
Final Drives
Type
Double reduction, planetary with full floating axles.
Differential Ratio
Planetary Ratio
Total Reduction Ratio
Note
Double reduction, planetary with full floating axles.
Transmission
Forward - 1
Forward - 2
Forward - 3
Forward - 4
Forward - 5
Forward - 6
Forward - 7
Reverse
Top Speed - Loaded
Tires
Tires
Rims
Note
Quick Change Rims optional.
Note (1)
Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities.
Braking System
Service Brakes
Service Brakes: Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated
Front Wet Disc Brake Surface Area
Rear - Wet Disc Brake Surface Area
Standards
Service and Secondary: ISO 3450:2011
Parking Brake
Four-corner, Multi-disc, Spring Applied, Hydraulically Released
Load Brake
Note
Anti-Lock Brake System (ABS) optional with CMD package
Capacity - HP Body - 100% Fill Factor
Struck
Heaped (SAE 2:1)*
Note (1)
Consult your local Cat dealer for body recommendations.
Body Hoists
Type
Twin, two-stage hydraulic cylinders with snubbing valve.
Pump Flow - High Idle
Relief Valve Setting - Raise
Body Raise Time - High Idle
Body Lower Time - Float
Body Power Down- High Idle
Suspension
Type
Self-contained nitrogen/oil cylinders, rear strut pin-to-pin mounting, top & bottom double shear clevis attachments
Effective Cylinder Stroke - Front
Effective Cylinder Stroke - Rear
Rear axle - Oscillation
Service Refill Capacities
Fuel Tank
Fuel Tank (Tier 4)
Diesel Exhaust Fluid Tank
Cooling System
Crankcase
Front Wheels - Each
Differentials
Steering Tank
Steering System - Including Tank
Brake/Hoist Tank
Brake Hoist System - Includes Tank
Torque Converter Sump
Torque Converter/Transmission System - Including Sump
Note (1)
DEF Tank only available for EPA Tier 4 engine option.
Cab
Air Conditioning
HFC - 134A refrigerant: 24,300 Btu/h
Heater / Defroster
Note
Ambient capabilities down to -30C (-22F) for heater/defroster and up to 50C (122F) for air conditioning.
FOPS Standards
FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II criteria and ISO 13459:2012 Level II
ROPS Standards (2)
ROPS (Rollover Protective Structure) meets ISO 3471:2008 criteria and ISO 13459:2012
Sound
Sound Standards (2)
Operator sound pressure level, 78 dB(A), is tested to ISO 6394:2008 and ISO 6396:2008
Steering
Steering Angle
Steering Standards
Turning Diameter - Front
Note
Turning Diameter (ISO 7457:2009)
Dimensions
Rear Axle - Clearance - Loaded
Inside Body Depth - Maximum
Overall Height - Body Raised
Loaded Ground Clearance
Loading Height - Empty
Engine Guard Clearance - Loaded
Height - Top of ROPS - Empty
Front Canopy Height - Empty
Overall Body Length
Inside Body Length
Overall Length
Wheel Base
Rear Axle - Tail
Dump Clearance
Centerline Front Tire Width
Overall Canopy Width
Outside Body Width
Inside Body Width
Centerline of Rear Dual Tire Width
Overall Tire Width