Engine
Gross Power - SAE J1995
Standard Gross Power - SAE J1995
Engine Model
Optional Gross Power - SAE J1995
Optional Gross Power - SAE J1995 (Option 2)
Rated Speed
Net Power - SAE J1349
Emissions Rating
Bore
Stroke
Displacement
Note (1)
Contact factory for high altitude configuration.
Note (2)
Tier 4 / EU Stage V option available for regions that require these emissions standards.
Note (3)
Tier 4 / EU Stage V engine option Net Power - SAE J1349: 3434 HP (2561 kW)
Weights - Approximate
Nominal Rated Payload
Rated Gross Machine Weight
Chassis Weight
Body Weight
Note (1)
Consult your tire manufacturer for maximum tire load.
Note (2)
Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires
Note (3)
Refer to Cat Mining Truck 10/10/20 Overload Policy (AEXQ0250) for maximum gross machine weight limitations.
Note (4)
Tier 4 Final / Stage V chassis weight: 426312 lb (193372 kg)
Final Drives
Total Reduction Ratio
AC Drive System
Total Reduction Ratio
Top Speed - Loaded
Generator/Alternator
Brushless, engine mounted, dual bearing
Controls
IGBT Inverter Technology, air cooled, pressurized cabinet with filtration
Wheel Motor
High-torque AC induction, rear axle mounted
Cooling System
Variable speed, hydraulically driven cooling system
Tires
Standard Tires
Rims
Note (1)
Quick Change Rims optional.
Note (2)
Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities.
Braking System
Service Brakes
Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated
Front Wet Disc Brake Surface Area
Rear - Wet Disc Brake Surface Area
Standards
Parking Brake
Four-corner, Multi-disc, Spring applied, Hydraulically Released
Load Brake
Dynamic Retarding Power - Continuous
Weight Distributions - Approximate
Front Axle - Empty
Rear Axle - Empty
Front Axle - Loaded
Rear Axle - Loaded
Body Hoists
Pump Flow - High Idle (HAA at 1,800 rpm)
Capacity - HE Body - 100% fill factor
Struck
Body Hoists
Pump Flow - High Idle (LAA at 1,960 rpm)
Capacity - HE Body - 100% fill factor
Heaped (SAE 2:1)
Dump Body Plate Thickness Varies Depending on Body Selection - Floor Plate
Body Hoists
Relief Valve Setting - Raise
Body Raise Time - High Idle
Capacity - HE Body - 100% fill factor
Dump Body Plate Thickness Varies Depending on Body Selection - Front Plate
Dump Body Plate Thickness Varies Depending on Body Selection - Side Plate
Body Hoists
High Idle Body Lower Time - Float
Capacity - HE Body - 100% fill factor
Dump Body Plate Thickness Varies Depending on Body Selection - Canopy Plate
Body Hoists
Total Cycle Time
Capacity - HE Body - 100% fill factor
Note
Contact your local Cat dealer for body recommendations.
Body Hoists
Note (1)
Twin, two-stage hydraulic cylinders mounted inside main frame; double-acting cylinders in both stages.
Note (2)
Power raise in both stages; power down in both stages possible.
Note (3)
Automatic body-lower modulation reduces impact on frame.
Service Refill Capacities
Fuel Tank
Cooling System
Crankcase
Final Drive - Each
Hydraulic Tank
Hydraulic System - Including Tank
Diesel Exhaust Fluid Tank
Note (1)
DEF Tank only available for EPA Tier 4 / EU Stage V engine option.
Cab
ROPS Standards (1)
Rollover Protective Structure (ROPS) meets ISO 3471:2008 criteria for operator and ISO 13459:2012 for trainer.
FOPS Standards
Falling Object Protective Structure (FOPS) meets ISO 3449:2005 Level II for operator and ISO 13459:2012 Level II for trainer.
Sound
Sound Standards (1)
The operator sound pressure level measured according to work cycle procedures specified in ISO 6394 and 6396 is 75 dB(A) for cab offered by Caterpillar when properly installed, maintained, and tested with doors and windows closed.
Sound Standards (2)
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment.
Steering
Steering Standards
Note
Gross Machine Operating Weight is 521 631 kg (1,150,000 lb).
Steer Angle
Dimensions (Approximate)
Height - Top of ROPS
Overall Length
Wheel Base
Rear Axle - Tail
Ground Clearance
Dump Clearance
Loading Height - Empty
Overall Height - Body Raised
Centerline Front Tire Width
Front Axle Clearance
Canopy Width (without optional rock deflectors)
Outside Body Width
Inside Body Width
Front Canopy Height
Rear Axle - Clearance
Centerline of Rear Dual Tire Width
Overall Tire Width
Overall Canopy Width