Engine
Gross Power - SAE J1995:2014
Bore
Displacement
Net Power - ISO 9249
Net Power - SAE 1349
Peak Torque at 1,360 rpm SAE J1995
Engine Model
Cat® C3.6 TA (turbocharged after-cooled)
Stroke
Hydraulic System
Hydraulic Flow - High Flow - Loader Hydraulic Flow
Hydraulic Flow - High Flow - Loader Hydraulic Pressure
Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated)
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure
Hydraulic Flow - Standard - Hydraulic Power (Calculated)
Hydraulic Flow - Standard - Loader Hydraulic Flow
Hydraulic Flow - Standard - Loader Hydraulic Pressure
Weights*
Operating Weight
Counterweight Adds to Operating Weight
Counterweight Adds to Operating Weight - ROC (35%)
Counterweight Adds to Operating Weight - Tip Load
Enclosed Cab Adds to Operating Weight
Enclosed Cab Adds to Operating Weight - ROC (35%)
Enclosed Cab Adds to Operating Weight - Tip Load
Note
*Operating Weight, Operating Specifications, and Dimensions are all based on 75 kg (165 lb) operator, all fluids, two speed, 2036 mm (80 in) low profile bucket, 400 mm (15.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, open Rollover Protective Structure (ROPS) cab,mechanical suspension seat, standard monitor, 1000 CCA battery, no optional counterweights and manual quick coupler (unless otherwise noted).
Service Refill Capacities
Cooling System
Engine Crankcase
Fuel Tank
Hydraulic System
Hydraulic Tank
Operating Specifications
Rated Operating Capacities - 35% Tipping Load
Breakout Force - Lift Cylinder
Breakout Force - Tilt Cylinder
Ground Contact Area - With 450 mm/17.7 in Track
Ground Pressure - With 400 mm/15.7 in Track
Ground Pressure - With 450 mm/17.7 in Track
Rated Operating Capacities - 50% Tipping Load
Rated Operating Capacity with Optional Counterweight
Tipping Load
Dimensions
Bucket Pin Height - Carry Position
Bucket Pin Height - Maximum Lift
Bucket Pin Reach - Maximum Lift
Clearance at Maximum Lift and Dump
Departure Angle
Ground Clearance
Height - Top of Cab
Length - Track on Ground
Length - With Bucket on Ground
Length - Without Bucket
Maximum Overall Height
Maximum Reach - With Arms Parallel to Ground
Overall Length - Track
Rack Back Angle - Maximum Height
Reach at Maximum Lift/Dump
Roll Back Angle
Turning Radius from Center - Bucket (racked)
Turning Radius from Center - Coupler
Turning Radius from Center - Machine Rear
Vehicle Width (450 mm/17.7 in tracks)
Maximum Dump Angle
Cab
FOPS
ROPS
Power Train
Travel Speed - Forward or Reverse - One Speed
Travel Speed - Forward or Reverse - Two Speed
Service Refill Capacities
Diesel Exhaust Fluid (DEF) Tank
Cab
FOPS Level II
ISO 3449:2005 Level II (Optional)
Standard Equipment
STANDARD EQUIPMENT
PERFORMANCE PACKAGES
COMFORT PACKAGES
TECHNOLOGY PACKAGES
RADIO
PRODUCT LINK™
COOLING FAN
GUARDING AND SEALING PACKAGES
ELECTRICAL
OPERATOR ENVIRONMENT
HYDRAULICS
POWER TRAIN
UNDERCARRIAGE
FRAME
OTHER
Optional Equipment
OPTIONAL EQUIPMENT