Engine
Gross Power - SAE J1995:2014
Net Power - SAE J1349:2011
Net Power – ISO 9249:2007
Engine Power - ISO 14396:2002
Engine Model
Emissions
U.S. EPA Tier 4 Final/ EU Stage V/Korea Stage V and Japan 2014 or Brazil MAR-1, emitting equivalent to U.S. EPA Tier 3/EU Stage IIIA
Rated Speed
Peak Torque (1,300 rpm)
Torque Rise
Bore
Stroke
Displacement
High Idle Speed
Low Idle Speed
Maximum Altitude – Without Derating (Tier 4 Final/Stage V)
Maximum Altitude - Without Derating (Tier 3/Stage IIIA)
Note
Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.
Operating Specifications
Operating Weight (Tier 4 Final/Stage V)
Operating Weight (Tier 3/Stage IIIA equivalent)
Maximum Operating Weight (Tier 4 Final/Stage V)
Maximum Operating Weight (Tier 3/Stage IIIA equivalent)
Transmission
Transmission Type
Planetary - Powershift - ECPC
Direct Drive - Forward 1
Direct Drive - Forward 2
Direct Drive - Reverse 1
Direct Drive - Reverse 2
Hydraulic System
Pump Flow at 1800 rpm
Main Relief Pressure
Maximum Supply Pressure
Lift System
Bore
Stroke
Service Refill Capacities
Cooling System
Engine Crankcase
Transmission
Fuel Tank
Diesel Exhaust Fluid Tank (Tier 4 Final/Stage V)
Differential - Final Drives - Front
Differential - Final Drives - Rear
Hydraulic Tank Only
Note
All nonroad Tier 4 Final and Stage V diesel engines are required to use: – Ultra low sulfur diesel (ULSD) fuels containing 15 ppm (mg kg) sulfur or less. Biodiesel blends up to B20 are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD and when the biodiesel feedstock meets ASTM D7467 specifications.– Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specifications are required.– Diesel exhaust fluid (DEF) that meets all requirements defined in ISO 22241-1:2006.
Axles
Front
Rear
Oscillation Angle
Braking System
Service Brakes
Multi Disc Wet (Enclosed) 2 WHL
Parking Brake
Drum and Shoe, Spring Applied, Hydraulic Released
Sound Performance - Tier 4 Final/EU Stage V
Operator Sound Level (ISO 6396:2008) - Standard
Machine Sound Level (ISO 6395:2008) - Standard
Operator Sound Level (ISO 6396:2008) - Suppression
Machine Sound Level (ISO 6395:2008) - Suppression
Note (1)
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (2)
The machine sound power level was measured according to the test ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (3)
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment.
Sound Performance - Tier 3 / Stage IIIA
Operator Sound Level (ISO 6396:2008) - Standard
Machine Sound Level (ISO 6395:2008) - Standard
Operator Sound Level (ISO 6396:2008) - Suppression
Machine Sound Level (ISO 6395:2008) - Suppression
Note (1)
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (2)
The machine sound power level was measured according to the test ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (3)
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment.
Hydraulic System - Steering
Steering System - Circuit
Double Acting - End Mounted
Bore
Stroke
Steering System - Pump
Piston - Variable Displacement
Maximum System Flow
170 L/min @ 1,800 rpm (44.9 gal/min @ 1,800 rpm)
Steering Pressure Limited
Vehicle Articulation Angle
Dimensions (Approximate)
Height to Top of Air Conditioning Condenser
Height - Cab Roof
Height - Top of Beacon
Height - Top of Exhaust Pipe
Height - Top of Hood
Ground Clearance - Bumper
Centerline of Rear Axle to Edge of Counterweight - No Rear Radiator Guard
Centerline of Rear Axle to Edge of Counterweight - Including Rear Radiator Guard
Hitch to Centerline of Front Axle
Wheel Base
Length - With Blade on Ground - Straight Blade - Including Rear Radiator Guard
Ground Clearance
Width - Over Wheels
Turning Radius - Inside of Wheels
Straight Blade
Width – Moldboard Length
Width - Over End Bits
Height with Cutting Edge and Screen
Maximum Depth of Cut
Maximum Lift above Ground
Capacity, Rated
Overall Machine Length (includes rear radiator guard, measured to cutting edge)
Semi U-Blade
Width – Moldboard Length
Width - Over End Bits
Height with Cutting Edge and Screen
Maximum Depth of Cut
Maximum Lift above Ground
Capacity, Rated
Overall Machine Length (includes rear radiator guard, measured to cutting edge)
U-Blade
Width – Moldboard Length
Width - Over End Bits
Height with Cutting Edge and Screen
Maximum Depth of Cut
Maximum Lift above Ground
Capacity, Rated
Overall Machine Length (includes rear radiator guard, measured to cutting edge)
Wheels
Combination Tips (Weight Group)
Plus Tips - Weight (Group)
Paddle Tips - Weight (Group)
Diamond Tips Weight (Group)
Outside Diameter
Outside Diameter - Diamond
Drum Diameter
Drum Width
Feet Per Row
Feet Per Wheel
Replaceable
Width Over Drums
Tip Height
Tip Height - Diamond