Engine
Engine Model
Rated Engine Speed
Gross Power - SAE J1995:2014
Net Power - SAE J1349:2011
Net Power - 80/1269/EEC
Net Power - ISO 9249
Net Torque
Bore
Stroke
Displacement
Emissions
Meets EU Stage V emission standards.
Note (1)
Power rating applies at 1,800 rpm when tested under the specified condition for the specified standard.
Note (2)
Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F).
Note (3)
No engine derating required up to 3810 m (12,500 ft) for Tier 2 Equivalent.
Transmission
Forward - 1
Forward - 2
Forward - 3
Forward - 4
Forward - 5
Forward - 6
Forward - 7
Reverse
Note
Maximum travel speeds with standard 24.00R35 (E4) tires.
Final Drives
Differential Ratio
Planetary Ratio
Total Reduction Ratio
Brakes
Brake Surface - Front
Brake Surface - Rear
Brake Standards
Body Hoists
Pump Flow - High Idle
Relief Valve Setting - Raise
Relief Valve Setting - Lower
Body Raise Time - High Idle
Body Lower Time - Float
Body Power Down - High Idle
Weight Distributions - Approximate
Front Axle - Empty
Front Axle - Loaded
Rear Axle - Empty
Rear Axle - Loaded
Suspension
Empty Loaded Cylinder Stroke Front
Empty Loaded Cylinder Stroke Rear
Rear Axle - Oscillation
Sound
Sound Standards
Operator Sound Level (ISO 6396:2008) 76 dB(A) Machine Sound Level (ISO 6395:2008) 119 dB(A)
Sound Standards (1)
The operator sound pressure level is 76 dB(A), measured according to the test procedures and conditions specified in ISO 6396:2008 for the standard machine configuration. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Sound Standards (2)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Sound Standards (3)
The machine sound power level is 119 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the standard machine configuration. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Cab
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R1234yf. Refer to the machine labeling for identification of the gas.– If equipped with R1234yf (Global Warming Potential = 0.501), the system contains 1.85 kg (4.1 lb) of refrigerant which has a CO2 equivalent of 0.001 metric tonnes (0.001 tons)
Steering
Steering Standards
Steer Angle
Turning Diameter - Front
Turning Circle - Clearance Diameter
ROPS
ROPS/FOPS Standards
Rollover Protective Structure (ROPS)/Falling Objects Protective Structure (FOPS) Standards
ROPS Standards
Rollover protective structure (ROPS) meets ISO 3471:2008 for operator and ISO 13459:2012 for trainer ROPS criteria.
FOPS Standards
Falling objects protective structure (FOPS) meets ISO 3449:2005 Level II for operator and ISO 13459:2012 Level II for trainer FOPS criteria.
Tires
Standard Tire
Note (1)
Productive capabilities of the 775G truck are such that, under certain job conditions, TKPH (TMPH) capabilities of standard or optional tires could be exceeded and, therefore, limit production.
Note (2)
Caterpillar recommends the customer evaluate all job conditions and consult the tire manufacturer for proper tire selection.
Service Refill Capacities
Fuel Tank
Cooling System
Final Drive - Each
Differential - Final Drives
Steering System - Including Tank
Brake Hoist System - Includes Tank
Torque Converter - Transmission System - HRC
Crankcase
Sustainability
Recyclability
Dimensions (Approximate)
Length, Overall
Wheel Base
Rear Axle To Tail
Ground Clearance
Dump Clearance
Loading Height - Empty
Inside Body Depth - Maximum
Overall Height - Body Raised
Operating Width
Centerline Front Tire Width
Engine Guard Clearance
Outside Body Width
Inside Body Width
Front Canopy Height
Rear Axle Clearance - Loaded
Overall Body Length
Centerline of Rear Dual Tire Width
Inside Body Length
Height - Top of ROPS
Overall Tire Width
Engine
Net Torque Rise
Net Torque - SAE J1349
Peak Torque - Speed