Engine
Engine Model
Bore
Stroke
Displacement
Net Power - ISO 14396
Net Power - SAE J1349
Gross Power - SAE J1995
Engine Model - U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), Korea Tier 4 Final
Weights
Rated Payload
Body Capacities
Heaped (SAE 2:1)
Struck
Tailgate Heaped SAE 2:1
Tailgate Struck
Transmission
Forward - 1
Forward - 2
Forward - 3
Forward - 4
Forward - 5
Forward - 6
Forward - 7
Reverse - 1
Reverse - 2
Sound Levels
Interior Cab
Operating Weights
Rear Axle - Rated Load
Front Axle - Empty
Total - Loaded
Rear Axle - Empty
Rear Axle - Loaded
Total - Rated Load
Front Axle - Rated Load
Center Axle - Rated Load
Total - Empty
Front Axle - Loaded
Center Axle - Loaded
Center Axle - Empty
Body Plate
Type
High Strength Brinell HB450 Wear Resistant Steel
Service Refill Capacities
Fuel Tank
Cooling System
Engine Crankcase
Steering/Hoist Hydraulic System
Transmission - OTG
DEF Tank
Brake Cooling Tank
Body Hoist
Raise (automatic)
Raise (manual)
Steering
Lock to Lock
Standards
Brakes
Cab - FOPS
Cab - ROPS
Steering
Turning Circle
Turning Dimensions - Aisle Width
Turning Dimensions - Inside Radius
Turning Dimensions - Clearance Radius
Turning Dimensions - SAE Turning Radius
Note
Dimensions are for machines equipped with 29.5R25 tires.
Turning Dimensions - Steer Angle - Left/Right
Transmission
Forward - 8
Service Refill Capacities
Final Drive - Each
Body Plate
Base
Engine
Note (4)
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.
Note (1)
The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard.
Sound Levels
Note (1)
The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed.
Body Hoist
Lower (automatic)
Service Refill Capacities
Axles - Each
Engine
No Engine De-rating Required Below
Transmission
Forward - 9
Body Plate
Chute
Optimal Loader/Truck Pass Matching
Hydraulic Excavator: 390 - Passes
Engine
Note (2)
The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
Sound Levels
Note (2)
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
Engine
Note (3)
Net power when the fan is at maximum speed is 348 kW (467 hp) per the SAE reference conditions.
Peak Engine Torque Gross (SAE J1995)
Body Hoist
Lower (manual)
Optimal Loader/Truck Pass Matching
Wheel Loader: 982 - Passes
Body Plate
Side
Optimal Loader/Truck Pass Matching
Wheel Loader: 972 - Passes
Engine
Peak Engine Torque Speed
Body Plate
Front
Engine
Peak Engine Torque Net (SAE J1349)
Emissions
The 745 meets Tier 4 Final and Stage V emission standards.
Optimal Loader/Truck Pass Matching
Hydraulic Excavator: 374 - Passes
Note
An optimum system match gives you a major productivity advantage. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved.
Wheel Loader: 980 - Passes