Engine
Engine Model
Flywheel Power
Displacement
Transmission
Drawbar Pull - 2 Forward
Weights
Operating Weight - Standard
Dimensions
Ground Clearance
Length - Track on Ground
Transmission
Drawbar Pull - 1 Forward
Engine
Emissions
U.S. EPA Tier 4 Final/ EU Stage IV/ Korea Tier 4 Final
Transmission
2 Forward
1.5 Forward
2 Reverse
Service Refill Capacities
Fuel Tank
Engine
Net Power - Rated - ISO 9249/SAE J1349
Transmission
3 Reverse
Drawbar Pull - 3 Forward
2.5 Reverse
Engine
Net Power - Rated - ISO 9249/SAE J1349 (DIN)
Transmission
1 Forward
Engine
Note (2)
Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
Transmission
3 Forward
Dimensions
Note (2)
**When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm/3.2 in.
Length - Basic Tractor - With Drawbar
Note (1)
* Add the following measurements for attachments: Ripper (single shank) 1519 mm/59.8 in; Ripper (multi-shank) 1613 mm/63.5 in; Drawbar 406 mm/16.0 in; SU Blade 1844 mm/72.6 in; U Blade 2241 mm/88.2 in; A Blade (not angled) 2027 mm/79.8 in; A Blade (angled 25 degrees) 3068 mm/120.8 in.
Width - Without Trunnions - Standard Shoe
Transmission
1.5 Reverse
Engine
Note (1)
All nonroad Tier 4 Final, Stage IV, and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) with 15 ppm (mg/kg) of sulfur or less, or up to B20 biodiesel blended with ULSD. B20 should meet ASTM D7467 specifi cation (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specifi cation are required. Consult your OMM for further machine specifi c fuel recommendations.
Standard Equipment
Power Train
Power Train, Engine, Brakes
Bottom Guards
Electrical
Final Drives
Hydraulics
Operator Environment
Other Standard Equipment
Starters, Batteries, And Alternators
Undercarriage
Optional Equipment
Blades
Bottom Guards
Bulldozers
Electrical
Guards
Hydraulics
Operator Environment
Other Attachments
Power Train, Engine, Brakes
Rear Attachments
Ripper Shank Teeth
Technology Products
Undercarriage