Pull-Down/Hoisting Capacity
Pull-Down Capacity
Up to 15 876 kg (Up to 35,000 lb)
Specifications
Hole Diameter
Engine
Bit Load
Up to 16 964 kg (37,400 lb)
Basic Specs
U.S. EPA Tier 2 Equivalent - Engine
U.S. EPA Tier 2 Equivalent - Emissions
U.S. EPA Tier 2 equivalent
U.S. EPA Tier 4 Final - Engine
U.S. EPA Tier 4 Final - Emissions
Compressor - Rotary Drilling
32.6 cmm (1,150 cfm) @ 8.6 bar (125 psi)
Angle Drilling Available
30 degrees to 0 degrees in 5-degree increments
Compressor Choices
DTH Drilling
Includes tool lubrication system
Rotary Drilling
Optional tool lubrication system
Note
With the compressor's electronic controls plus variable volume control, the operator can adjust air output to reach optimal match of tool, flushing air and ground conditions. Both high and low pressure compressors contain this feature.
Receiver Tank Choices
Choice (1)
Low pressure 8.6 bar (125 psi)
Choice (2)
High pressure 24.1 bar (350 psi)
Cooling
Components (1)
Coolers with easy cleaning access
Components (2)
All cooler core sections are replaceable
Components (3)
Functional in ambient temperature of up to 52� C (125� F)
Components (4)
Automatic variable speed fan control
Climate Choices
Climate Level 1 Standard Fluids and Lubricants (1)
Climate Level 1 Standard Fluids and Lubricants (2)
Withstands high heat up to 52 C (125 F)
Frame and Work Deck
Features (1)
Jacks, mast pivot and deck are welded integrally to mainframe for maximum durability and long life
Features (2)
Features (3)
Fuel tank capacity 833 L (220 gal)
Components (1)
Three leveling jacks provide leveling on a 7� bench (any orientation)
Components (2)
Heavy duty tow hooks (non-drill end)
Components (3)
Four (4) lift lugs, for use with cables or chains
Frame Access Choices
Choice (1)
Fixed access steps to the cab area
Choice (2)
Small platform to the cab includes fixed access steps
Drill Deck Misc.
Components (1)
Drill pipe thread greaser with remote fill tank that also accommodates disposable grease bucket
Undercarriage
Model
Carrier Rollers
Triple Grousers (1)
600 mm (23.6 in); 0.89 bar (12.6 psi) ground pressure
Hydraulics
Components (1)
Two (2) main pumps: 85 cc (piston with proportional electronic controls)
Components (2)
One (1) auxiliary circuit pump: 45 cc (piston, load sensing)
Components (3)
One (1) fan pump: 45 cc (piston with proportional electronic controls)
Components (4)
One (1) charge pump: 73.8 cc (gear, fixed displacement)
Basic Specs
Bit Load (single-Pass)
Dust Control Choices
High Volume Water Injection - Maximum - Tank Above Deck - Capacity
Mast Packages
Single-Pass Depth
Engine Features
Feature (3)
Tier 4 Final package complete with DEF/Engine Shutdown Control Package
Compressor Choices
DTH Drilling - 1050 cfm/350 psi
29.7 cmm (1,050 cfm) @ 24.1 bar (350 psi) with 113.5 L (30 gal) tool oiler
Engine Features
Feature (1)
Dust Control Choices
Water Injection - Tank Mounted Below Front Deck - Components
Water flow meter, volume control, tank fill level indicator
Basic Specs
Hoist Speed
Tool Package DTH
Components (8)
Basic Specs
Hole Diameter Range
Undercarriage
Drawbar Pull
262 000 Nm (193,241 lbf-ft)
Dimensions (Approximate)
Width cab end*
Basic Specs
Hole Depth Range - Single-Pass Depth
Mast Packages
Multi-Pass Depth
Down to 47.58 m (Down to 156 ft)
Pulldown - Rated Single Cylinder Pull-Down/Hoist System
Up to 15 876 kg (Up to 35,000 lb)
Tool Package DTH
Components (7)
Drill tool lubricator is included with selection of DTH Compressor
Basic Specs
Compressor - DTH Drilling
29.7 m_/min (1,050 ft_/min) @ 24.1 bar (350 psi)
Undercarriage
Components (1)
Track chain guards and guides
Basic Specs
Pull-DownCapacity
Up to 15 876 kg (Up to 35,000 lb)
Mast Packages
Hoist
Up to 11 907 kg (Up to 26,250 lb)
Basic Specs
Hoist Capacity
Up to 11 907 kg (Up to 26,250 lb)
Hole Depth Range - Multi-Pass Depth
Down to 47.58 m (Down to 156 ft)
Hydraulics
Components (5)
Scheduled Oil Sampling (S-O-S SM) ports
Engine Features
Feature (2)
Undercarriage
Lower rollers
Basic Specs
U.S. EPA Tier 4 Final - Power Rating (ISO 14396)
U.S. EPA Tier 2 Equivalent - Power Rating (ISO 14396)
Undercarriage
Travel Speed - High
Drill Pipe
9.14 m (30 ft) pipes - Accepts quantity of four (4) - Option 5
9.14 m (30 ft) pipes - Accepts quantity of four (4) - Option 4
Undercarriage
Travel Speed - Low
Climate Choices
Climate Level 2 Arctic Fluids and Lubricants, Engine Block and Manifold Heater 120V or 240V
Rated down to -18 C (0 F)
Compressor Choices
Rotary Drilling - 1150 cfm/125 psi
32.6 cmm (1,150 cfm) @ 8.6 bar (125 psi)
Dust Control Choices
High Volume Water Injection - Maximum - Tank Below Deck - Capacity
Tool Package Rotary
Components (7)
Drill tool lubricator (optional)
Frame Access Choices
Choice (3)
Platform access to the cab with full length service access walkway includes fixed access steps and self-closing gates
Dimensions (Approximate)
Width non-cab end
Mast and Pipe Carousel Features
Features (1)
Pipe carousel:
Accepts quantity of four (4) 9.14 m (30 ft) pipes
Features (2)
Standard angle drilling package (0 to 30 degrees, in�5-degree�increments)
Dimensions (Approximate)
Height mast up
Body Length
Mast and Pipe Carousel Features
Features (4)
Hydraulically actuated, self-indexing pipe carousel accepts pipe diameters up to 152 mm (6.0 in)
Dimensions (Approximate)
Length mast down
Height mast down
Mast and Pipe Carousel Features
Features (5)
Drills strings configured for bit changes above deck
Features (6)
Single cylinder pulldown/hoist system
Dimensions (Approximate)
Mast only length
Mast and Pipe Carousel Features
Features (7)
Sliding deck wrench assembly
Features (8)
Configured with roller deck bushing (for low pressure/tricone drilling)
Features (9)
Two-piece deck bushing (for high pressure DTH drilling)
Features (10)
Overhead winch with cable and hook plus remote control; variable speed drive with a 1361 kg (3,000 lb) rating
Features (11)
Variable grip hydraulic break out wrench grip range 101-152 mm (4.0-6.0 in)
Features (12)
Closed circuit camera mounted in mast to view pipe carousel/top drive operation
Features (13)
Pipe positioner for angle drilling, multi-pass pipe handling
Features (14)
Manual pipe catcher: One (1) wire rope, pipe catcher, pipe positioner, optional manual bit basket
Tool Package Rotary
Components (1)
One-piece roller deck bushing
Components (2)
Components (3)
Components (4)
Components (5)
Components (6)
Tool Package DTH
Components (1)
Components (2)
Components (3)
Components (4)
Components (5)
Components (6)
Rotary Head Top Drive System
Torque - Single Motor
Rotation Speed
Components (1)
Components (2)
Virtual rotary head travel interlocks
Components (3)
Virtual rotary head travel interlocks
Operator Environment
Cab Design
Falling Object Protective Structure (FOPS) certified cab includes:
- Rubber shock-mounts to absorb mechanical vibration
- Operator station design that integrates an ergonomic seat, joystick controls with full instrumentation, dual 254 mm (10 in) high-definition color screens and 12 volt power port
- Additional display screen for cc cameras; color, high-definition 254 mm (10 in)
- Power convertor 24V to 12V
- Radio-ready for communication and entertainment stereo
- Two swing out doors and Cat keyed locks
- Literature holder
- Storage area suitable for lunchbox
Cab Packages
Standard configuration includes a fabric seat, removable floor mat, single pane window glass and driller window guard
Premium configuration includes a leather seat with heat and ventilation, heavy duty suspension, dual pane window glass and driller window guard.
Seating
- Swivel seat is fully ergonomic, with tilt (5° adjustment), lumbar support, and fore/aft seat adjustment 80 mm (3.1 in)
- Seat locks and has two point retractable, 76 mm (3 in) seat belt
Windows
- Large windows on the front, rear and right cab side; full length drill window with guard
- Window shades (option)
- Windshield wiper with a common washer tank
- Manometer Pressure Gauge (option)
Lighting
- LED interior lights, backlit joysticks and keypads
- Flood lights for the drill perimeter; area spotlights
- Mast beacon and tram flashing strobe light (option)
HVAC
- Floor heating vent
- Filter access from deck, 500 hour service interval
- Defogging HVAC vents on main window
Cameras
- Three (3) CC cameras (front, right and left sides) provide 360° visibility from operators seat; camera on the mast to view pipe carousel/top drive operation
Operating System Controls - Standard
Components (1)
Electric controls for drilling, tramming, leveling plus auxiliary functions
Components (2)
Components (3)
Virtual rotary head travel stops
Components (4)
Pipe positioner engaged/disengaged indicator
Components (5)
Components (6)
Drill performance and display system
Components (7)
Components (8)
Filter indicators for hydraulic, fuel, compressor and engine
Components (9)
Components (10)
Data logging of machine health with warnings and fault code records with export capability
Components (11)
Components (12)
Components (13)
ECM proportional fan speed control system
Components (14)
Tram interlock, machine stability limits
Components (15)
Tram interlock, pipe in hole
Components (16)
Tram interlock, mast up and locked or down and parked
Components (17)
Tram interlock, jacks retracted
Components (18)
Tram interlock, winch parked
Components (19)
Cab environment controls (AC, heat, fan speeds)
Dimensions (Approximate)
Note
*Contact the factory for width with platform access to cab or service platform walkway.
Operating System Controls - Standard
Components (20)
Pre wired for Terrain and Autonomous Operation
Automation and Technology
Type (1)
Components (1)
Components (2)
Drill Assist Automated Functionality (onboard technology):
- Auto Level (with auto retract jacks)
- Auto Mast (raise, lower and lock into place)
- Auto Dril (single pass)
Components (3)
Components (4)
Dust Control Choices
Water Injection - Tank Mounted Below Front Deck
High Volume Water Injection - Maximum - Tanks Total Capacity
Water Injection plus Dust Collector (1)
76.5 cmm (2,700 cfm) dust collector; includes standard water injection
Water Injection plus Dust Collector (2)
Self-cleaning filters, dust chute clean-out door
Choices (1)
Static dust curtains, four sides boxed enclosed
Choices (2)
Dust curtain hydraulic lifters raise front and rear dust curtains (option) (recommended with dry dust collector)
Choices (3)
Tram off spray system (option)
Safety and Security
Feature (1)
Approach angle of 15-degrees facilitates loading and unloading on a lowboy
Components (1)
Seven (7) emergency stop buttons
Components (2)
Hinged window guard over the full length of the front drill window
Components (3)
Conditional safety interlocks
Components (4)
Components (5)
Electric horn activated by push button in the cab
Components (6)
Automatic, audible tram alarm
Components (7)
Battery disconnect and starter switches can be locked out
Components (8)
Air hose retention devices
Components (9)
Slip resistant platform surfaces
Components (10)
Machine lifting provisions
Components (11)
FOPS Certified Operator Cab
Service Packages
Package (1)
Basic Package: Centralized manual lubrication for all pivot points, gravity fill for fuel and water
Package (2)
Standard Package: Automated lubrication system, fast fill for fuel and water (option)
Package (3)
Premium Package: Automated lubrication system, fast fill fuel and water, service center for lubricant drain and fill plus blowdown hose (option)
Weights
Working Weight Range
40 823 - 45 359 kg (90,000 - 100,000 lb)