Engine
Engine Power - ISO 14396
Engine Power - ISO 14396 (DIN)
150 hp (metric)
150 hp (metric)
Engine Model
Net Power - ISO 9249
Net Power - ISO 9249 (DIN)
143 hp (metric)
143 hp (metric)
Bore
Stroke
Displacement
Biodiesel Capability
Emissions
Meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Note (1)
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, Clean Emission Module (CEM) exhaust gas aftertreatment, alternator, and cooling fan running at intermediate speed. Rated speed 2,000 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture.
Note (2)
¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)*** or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. *While Caterpillar engines are compatible with these alternative fuels, some regions may not allow their use. **Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels. ***Engines with no aftertreatment devices are compatible with higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).
Drive
Maximum Travel Speed
Hydraulic System
Main System - Maximum Flow - Implement
Maximum Pressure - Implement Circuit - Normal
Maximum Pressure - Implement Circuit - Heavy Lift
Maximum Pressure - Implement Circuit - Travel Circuit
Swing Mechanism
Maximum Swing Speed
Maximum Swing Torque
Machine Weight
Operating Weight Maximum
Operating Weight Minimum
Note (1)
Operating weight includes full fuel tank, operator and 10.00-20 tires. Weight varies depending on configuration.
Service Refill Capacities
Fuel Tank
Diesel Exhaust Fluid (DEF)
Cooling System
Hydraulic Tank
Hydraulic System - Including Tank
Dimensions
Boom
Variable Adjustable Boom 5.2 m (17'1")
Stick
Bucket
Shipping Height - Top of Cab
Shipping Length
Support Point
Tail Swing Radius
Counterweight Clearance
Ground Clearance
Undercarriage Length
Wheel Base
Working Ranges and Forces
Boom
Variable Adjustable Boom 5.2 m (17'1")
Stick
Bucket
Maximum Cutting Height
Maximum Loading Height
Maximum Digging Depth
Maximum Vertical Wall Digging Depth
Maximum Reach at Ground Line
Stick Forces (ISO)
Bucket Forces (ISO)
Note (1)
Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1484 mm (4'10"). Force values are calculated with heavy lift on, a GD bucket (pin-on) and a tip radius of 1378 mm (4'6").
Air Conditioning System
Note
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. If equipped with R134a (Global Warming Potential = 1430), the system contains 0.9 kg (2.0 lb) of refrigerant which has a CO2 equivalent of 1.287 metric tonnes (1.418 tons). If equipped with R1234yf (Global Warming Potential = 0.5), the system contains 0.75 kg (1.65 lb) of refrigerant which has a CO2 equivalent of 0.0004 metric tonnes (0.0004 tons).
Standard Equipment
NOTE
BOOM AND STICKS
ELECTRICAL SYSTEM
ENGINE
HYDRAULIC SYSTEM
SAFETY AND SECURITY
SERVICE AND MAINTENANCE
CAT TECHNOLOGY
UNDERCARRIAGE AND STRUCTURES
CAB
Optional Equipment
NOTE
ELECTRICAL SYSTEM
HYDRAULIC SYSTEM
SAFETY AND SECURITY
SERVICE AND MAINTENANCE
CAT TECHNOLOGY
UNDERCARRIAGE AND STRUCTURES
CAB