Engine
Engine Model
Peak Power Speed
Net Power - SAE J1349:2011
Rated Speed
Bore
Stroke
Displacement
Peak Torque (1,200 rpm) - SAE J1995:2014
Torque Rise
Note (1)
Two engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA.
Note (2)
Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.
Operating Specifications
Operating Weight - Standard
Bucket Capacity Range
5.0-10.3 m³ (6.5-13.5 yd³)
Operating Weight - High Lift
Rated Payload - Standard (Quarry Face)
Rated Payload - Loose Material (Standard)
Cat Truck Match - Standard
Cat Truck Match - High Lift
Transmission
Transmission Type
Cat planetary power shift
Forward - 1
Forward - 2
Direct Drive - Forward 2
Direct Drive - Forward 3
Direct Drive - Forward 4
Reverse - 1
Reverse - 2
Direct Drive - Reverse 2
Direct Drive - Reverse 3
Direct Drive - Reverse 4
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit
Lift/Tilt System - Pump
2 × 110 cc variable displacement
Maximum Flow at 2,165 rpm
Relief Valve Setting - Lift/Tilt
Lift Cylinder - Bore
Lift Cylinder - Stroke
Tilt Cylinder - Bore
Hydraulic Cycle Times
Rack Back
Raise
Dump
Lower Float Down
Total Hydraulic Cycle Time
Hydraulic System - Steering
Steering System - Circuit
Steering System - Pump
Piston, variable displacement
Steering Cut Off Pressure
Total Steering Angle
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system contains 1.8 kg (3.9 lb) of refrigerant, which has a CO2 equivalent of 2.574 metric tonnes (2.837 tons).
Axles
Front
Rear
Oscillation Angle
Oscillation Angle - Chain Arrangement
Brakes
Brakes
Operator's Cab
ROPS/FOPS
ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS)
Service Refill Capacities
Fuel Tank
Crankcase
Diesel Exhaust Fluid Tank
Transmission
Hydraulic System Factory Fill
Sound Performance - Tier 4 Final / Stage V
Operator Sound Pressure Level (ISO 6396:2008)
Machine Sound Power Level (ISO 6395:2008)
Operator Sound Pressure Level (ISO 6396:2008)*
Machine Sound Power Level (ISO 6395:2008)**
Note (1)
* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”
Note (2)
** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.
Note (3)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (4)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (5)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Sound Performance - Tier 3 / Stage IIIA
Operator Sound Pressure Level (ISO 6396:2008)
Machine Sound Power Level (ISO 6395:2008)
Operator Sound Pressure Level (ISO 6396:2008)*
Machine Sound Power Level (ISO 6395:2008)**
Note (1)
* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”
Note (2)
** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.
Note (3)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (4)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (5)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Dimensions (Approximate) - Standard Lift Linkage
Note
- All dimensions are approximate.
- Specifications are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
Dimensions (Approximate) - High Lift Linkage
Ground to Center of Front Axle
Ground to Fuel Tank Clearance
Note
- All dimensions are approximate.
- Specifications are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket
Ground to Top of Hood
Standard Equipment
NOTE
ELECTRICAL
OPERATOR ENVIRONMENT
POWERTRAIN
OTHER
Optional Equipment
NOTE
POWERTRAIN
MISCELLANEOUS ATTACHMENTS
OTHER OPTIONAL CONFIGURATIONS
OPERATOR ENVIRONMENT