HomeMachines/EquipmentNew MachinesWheel Loaders930M Small Wheel Loader

930M Small Wheel Loader

360 View Video

Product Description

The Cat® 930M Aggregate Handler sets a new standard for productivity, fuel efficiency and comfort. A high torque, low speed C7.1 engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. The optimized Z-bar loader linkage combined with long wear life Performance Series buckets delivers improved payloads and bucket longevity. Extremely low sound levels, large spacious cab and intuitive controls keep you working comfortably all day and even all night! Experience the new industry benchmark.

Specifications
Us
Metric
Engine
Maximum Rated Gross Power - ISO 14396
164 HP
122 kW
Maximum Rated Gross Power - ISO 14396 (Performance Power Mode: Range 1-4)
164 HP
122 kW
Maximum Rated Gross Power - ISO 14396 (DIN) (Performance Power Mode: Range 1-4)
166 HP
122 kW
Rated Net Power - 1,800 rpm - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
157 HP
117 kW
Maximum Rated Gross Power - ISO 14396 (DIN)
166 HP
122 kW
Engine Model
Cat® C7.1
Maximum Rated Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4)
1800 r/min
1800 r/min
Rated Net Power
157 HP
117 kW
Rated Net Power - 1,800 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
160 HP
119 kW
Buckets
Bucket Capacities
2.5-2.7 m3 (3.3-3.5 yd3)
Weights
Operating Weight
31144 lb
14131 kg
Engine
Maximum Gross Power
164 HP
122 kW
Bore
4 in
105 mm
Stroke
5 in
135 mm
Displacement
427 in³
7.01 l
Cab
ROPS
ISO 3471: 2008, FOPS: ISO 3449: 2005 LEVEL II
Engine
Maximum Rated Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*)
1600 r/min
1600 r/min
Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4)
592 ft·lbf
804 N·m
Power Train
Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65
± 10.5 degrees
Rear Axle
Oscillating
Engine
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*)
592 ft·lbf
804 N·m
Loader Hydraulic System
Lift Cylinder, Double Acting - Rod Diameter
2.6 in
65 mm
Engine
Note (3)
No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Power Train
Brakes - Parking
Spring applied hydraulically released
Transmission
Forward and Reverse - Range 3
17 mile/h
27 km/h
Service Refill Capacities
Rear Axles
6.6 gal (US)
25 l
Transmission
Note
* Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph).
Steering
Maximum Steering Torque - 0° (Straight Machine)
37155 ft·lbf
50375 N·m
Transmission
Forward and Reverse - Range 1*
1-13 km/h (0.6-8 mph)
Loader Hydraulic System
Maximum Flow - Implement Pump
50 gal/min
190 l/min
Transmission
Forward and Reverse - Range 2
8 mile/h
13 km/h
Engine
Rated Net Power - 1,600 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
156 HP
116 kW
Rated Net Power - 1,800 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Performance Power Mode: Range 1-4)
162 HP
119 kW
Service Refill Capacities
Front Axles
6.9 gal (US)
26 l
Cab
Declared Sound Levels
– Operator Sound Pressure Level (ISO 6396:2008): 68 dB(A)* – Exterior Sound Power Level (ISO 6395:2008): 101 dB(A)*
Engine
Note (4)
Spark arrester performance as standard – Meets the performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test).
Note (2)
Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
Steering
Maximum Steering Torque - 40° (Full Turn)
27747 ft·lbf
37620 N·m
Loader Hydraulic System
Relief Pressure - Tilt Cylinder
4061 psi
28000 kPa
Steering
Maximum Flow - Steering Pump
34 gal/min
130 l/min
Engine
Maximum Rated Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*)
160 HP
119 kW
Loader Hydraulic System
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift)
5.1/5.7 seconds
Service Refill Capacities
Hydraulic Tank
23.8 gal (US)
90 l
Loader Hydraulic System
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height)
1.5/1.7 seconds
Service Refill Capacities
Engine Crankcase
5.3 gal (US)
20 l
Loader Hydraulic System
Lift Cylinder, Double Acting - Stroke
28.7 in
728 mm
Service Refill Capacities
Diesel Exhaust Fluid (DEF) Tank
5 gal (US)
19 l
Loader Hydraulic System
Tilt Cylinder, Double Acting - Rod Diameter
3.5 in
90 mm
Tilt Cylinder, Double Acting - Stroke
21.9 in
555 mm
Steering
Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited
2.8 s
2.8 s
Maximum Working Pressure - Steering Pump
3500 psi
24130 kPa
Engine
Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4)
566 ft·lbf
768 N·m
Loader Hydraulic System
Lift Cylinder, Double Acting - Bore Diameter
4.7 in
120 mm
Service Refill Capacities
Transmission - Gear Box
2.2 gal (US)
8.5 l
Steering
Steering Cylinder, Double Acting - Bore Diameter
2.8 in
70 mm
Power Train
Rear Axle - Traction Aid - Optional
Limited slip differential
Engine
Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*)
566 ft·lbf
768 N·m
Power Train
Front Axle
Fixed
Service Refill Capacities
Cooling System
7.9 gal (US)
30 l
Engine
Maximum Rated Gross Power - ISO 14396 (DIN) (Standard Power Mode: Range 1-3*)
162 HP
119 kW
Steering
Steering Cylinder, Double Acting - Rod Diameter
1.6 in
40 mm
Engine
Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Standard Power Mode: Range 1-3*)
572 ft·lbf
776 N·m
Power Train
Brakes - Service
Inboard wet disc
Steering
Steering Cylinder, Double Acting - Stroke
17.2 in
438 mm
Loader Hydraulic System
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level)
2.7/2.7 seconds
Relief Pressure - Tilt Cylinder - 3rd Function Relief Pressure
4061 psi
28000 kPa
Power Train
Note (2)
Offset rims available to meet European roading requirements.
Service Refill Capacities
Hydraulic System - Including Tank
43.6 gal (US)
165 l
Loader Hydraulic System
Note (2)
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm)
Operating Specifications
Full Turn Tip Load
19563 lb
8876 kg
Steering
Note (1)
Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
Engine
Emissions
Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
Service Refill Capacities
Fuel Tank
51.5 gal (US)
195 l
Engine
Rated Net Power - 1,600 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
158 HP
116 kW
Loader Hydraulic System
Tilt Cylinder, Double Acting - Bore Diameter
5.9 in
150 mm
Maximum Flow - Implement Pump - 3rd Function*
50 gal/min
190 l/min
Note (1)
Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
Power Train
Front Axle - Traction Aid**
Locking differential (standard)
Engine
Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Performance Power Mode: Range 1-4)
572 ft·lbf
776 N·m
Loader Hydraulic System
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure
3626 psi
25000 kPa
Maximum Working Pressure - Implement Pump
3626 psi
25000 kPa
Note (3)
* 3rd function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped.
Steering
Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed
2.4 s
2.4 s
Cab
Note (2)
The Blue Angel environmental label is an optional attachment for Europe only.
Steering
Note (2)
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Transmission
Forward and Reverse - Range 4
25 mile/h
40 km/h
Engine
Rated Net Power - 1,600 rpm - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
154 HP
115 kW
Power Train
Note (3)
**Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 930M.
Engine
Note (1)
* Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
Loader Hydraulic System
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time
9.3/10.1 seconds
Power Train
Note (1)
Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
Cab
Note (1)
* Measurements were conducted at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab windows closed.
Standard/Optional

Standard Equipment

POWER TRAIN
HYDRAULICS
ELECTRICAL
OPERATOR ENVIRONMENT
OTHER STANDARD EQUIPMENT

Optional Equipment

Cab, deluxe (standard in Europe):
Cold start package:
Guards
Radio packages:
Seats:
Steering:
Tires:
888-702-0073 Email Us Download Product Brochure Understanding Your Finance Options

Available Used

CATERPILLAR 930G
Serial Number TWR00686
CATERPILLAR 930G
Serial Number TWR00955
CATERPILLAR 930K
Serial Number RHN03934
CATERPILLAR 930K
Serial Number RHN03527
CATERPILLAR 930M
Serial Number KTG02060
CATERPILLAR 930M
Serial Number KTG00532
CATERPILLAR 930M
Serial Number KTG02190
CATERPILLAR 930M
Serial Number KTG01874
CATERPILLAR 930M
Serial Number KTG02280
CATERPILLAR 930M
Serial Number KTG02112
CATERPILLAR 930M
Serial Number KTG02329
CATERPILLAR 930M
Serial Number KTG02018
CATERPILLAR 930M
Serial Number KTG00722C
View All

Your time is valuable, and your business, much appreciated. Thanks for visiting our website. You can count on us for realistic answers to your equipment needs, state-of-the-art technology, experienced application specialists, flexible acquisition options and customized financing. We look forward to answering your questions.

Connect With Us!