Maximum Gross Power - ISO 14396
Maximum Gross Power - ISO 14396 (DIN)
Maximum Gross Power - Maximum Engine Speed
Maximum Gross Power - SAE J1995
Rated Net Power - Rated Engine Speed
Rated Net Power - SAE J1349
Service Refill Capacities
Hydraulic System - Including Tank
Rated Bucket Capacity
Maximum Gross Power
Fixed; Locking differential (standard)
Oscillating ï¿½11 degrees; Locking differential (Standard)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 77 dB(A).
The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 103 dB(A).
*The measurements were conducted with the cab doors and windows closed.
Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
Maximum Gross Torque - ISO 14396
Maximum Gross Torque - SAE J1995
Maximum Net Torque - ISO 9249
Maximum Net Torque - SAE J1349
Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Rated Net Power - ISO 9249
Rated Net Power - ISO 9249 (DIN)
Loader Hydraulic System
Hydraulic Cycle Time - Dump, at Maximum Reach
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level
Hydraulic Cycle Time - Rackback
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift
Hydraulic Cycle Time - Total Cycle Time
Maximum Flow - Implement Pump
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard
Maximum Flow - Implement Pump - 4th Function, Maximum Flow
Maximum Working Pressure - Implement Pump
Relief Pressure - Tilt Cylinder
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure
Service Refill Capacities
Axles - Front Center Differential
Axles - Rear Center Differential
Diesel Exhaust Fluid (DEF) Tank
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Maximum Flow - Steering Pump
Maximum Working Pressure - Steering Pump
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
Steering Articulation Angle - Each Direction
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed
Other tire choices are available. Contact your Cat dealer for details.
In certain applications, the loader's productive capabilities may exceed the tire's tonnes-km/h (ton-mph) capabilities.
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Other Choices Include
17.5-25 12PR L2; 17.5-R25 XHA * L3; 17.5-R25 * L2/L3 PC RM; 17.5-25 16PR L3, 3PC Rim; 17.5-25 GY L2/L3; 17.5-25 12PR L2, SNOW; Flexportï¿½
Forward and Reverse - High Range
Forward and Reverse - Low Range, Speed Range 1*
Forward and Reverse - Low Range, Speed Range 2*
*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.