910M Compact Wheel Loader

360 View Video

Product Description

910M Compact Wheel Loader

Specifications
Us
Metric
Engine
Net Power
97 HP
72 kW
Rated Net Power - SAE J1349
96 HP
72 kW
Rated Net Power - Rated Engine Speed
2200 r/min
2200 r/min
Maximum Gross Power - ISO 14396 (DIN)
101 HP
74 kW
Maximum Gross Power - ISO 14396
100 HP
74 kW
Maximum Gross Power - Maximum Engine Speed
2350 r/min
2350 r/min
Engine Model
Cat C4.4 ACERT�
Maximum Gross Power - SAE J1995
102 HP
76 kW
Weights
Operating Weight
17893 lb
8116 kg
Service Refill Capacities
Cooling System
5.7 gal (US)
21.5 l
Fuel Tank
40.7 gal (US)
154 l
Hydraulic System - Including Tank
25.9 gal (US)
98 l
Engine Crankcase
2.3 gal (US)
8.8 l
Operating Specifications
Rated Bucket Capacity
2.5 yd³
1.9 m³
Engine
Maximum Gross Power
100 HP
74 kW
Buckets
Bucket Capacities
1.3 m3-1.9 m3 (1.7 yd3-2.5 yd3)
Cab
ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level II
Service Refill Capacities
Diesel Exhaust Fluid (DEF) Tank
5 gal (US)
18.9 l
Loader Hydraulic System
Hydraulic Cycle Time - Dump, at Maximum Reach
1.4 s
1.4 s
Engine
Emissions
Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
Loader Hydraulic System
Relief Pressure - Tilt Cylinder
4931 psi
34000 kPa
Maximum Flow - Implement Pump
32 gal/min
122 l/min
Service Refill Capacities
Note
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Transmission
Note
*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Engine
Stroke
5 in
127 mm
Steering
Steering Articulation Angle - Each Direction
40 °
40 °
Loader Hydraulic System
Maximum Working Pressure - Implement Pump
3408 psi
23500 kPa
Engine - Tier 4 Final/Stage IV
Maximum Net Torque - ISO 9249
329 ft·lbf
446 N·m
Axles
Front
Fixed; Locking differential (standard)
Service Refill Capacities
Axles - Rear Center Differential
2 gal (US)
7.5 l
Engine
Bore
4.13 in
105 mm
Loader Hydraulic System
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure
3046 psi
21000 kPa
Engine
Maximum Gross Torque - ISO 14396
332 ft·lbf
450 N·m
Transmission
Forward and Reverse - Low Range, Speed Range 1*
6.3 mile/h
10 km/h
Tires
Note (3)
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Steering
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed
3.2 s
3.2 s
Service Refill Capacities
Hydraulic Tank
14.5 gal (US)
55 l
Cab
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Engine
Rated Net Power - ISO 9249 (DIN)
98 HP
72 kW
Steering
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
3.75 turns
3.75 turns
Cab
Note (4)
*The measurements were conducted with the cab doors and windows closed.
Loader Hydraulic System
Hydraulic Cycle Time - Rackback
2.2 s
2.2 s
Engine - Tier 4 Final/Stage IV
Maximum Net Torque - SAE J1349
325 ft·lbf
441 N·m
Engine
Maximum Gross Torque - SAE J1995
336 ft·lbf
455 N·m
Steering
Maximum Working Pressure - Steering Pump
2683 psi
18500 kPa
Maximum Flow - Steering Pump
17 gal/min
66 l/min
Service Refill Capacities
Axles - Front Center Differential
2 gal (US)
7.5 l
Loader Hydraulic System
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift
5.2 s
5.2 s
Tires
Other Choices Include
15.5-R25; 17.5-25 12PR; 17.5-25 12PR L2; 17.5-R25 XHA * L3; 17.5-R25 * L2/L3 PC RM; 17.5-25 16PR L3, 3PC Rim; 17.5-25 GY L2/L3; 17.5-25 12PR L2, SNOW; Flexport�
Loader Hydraulic System
Hydraulic Cycle Time - Total Cycle Time
12.5 s
12.5 s
Transmission
Forward and Reverse - Low Range, Speed Range 2*
12.5 mile/h
20 km/h
Engine
Rated Net Power - ISO 9249
97 HP
72 kW
Cab
Note (3)
The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 103 dB(A).
Engine
Note
Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Displacement
268 in³
4.4 l
Transmission
Forward and Reverse - High Range
25 mile/h
40 km/h
Loader Hydraulic System
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level
3.7 s
3.7 s
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow
24 gal/min
90 l/min
Maximum Flow - Implement Pump - 4th Function, Maximum Flow
24 gal/min
90 l/min
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure
3046 psi
21000 kPa
Tires
Note (2)
In certain applications, the loader's productive capabilities may exceed the tire's tonnes-km/h (ton-mph) capabilities.
Service Refill Capacities
Transmission
0.9 gal (US)
3.4 l
Tires
Note (1)
Other tire choices are available. Contact your Cat dealer for details.
Axles
Rear
Oscillating �11 degrees; Locking differential (Standard)
Tires
Standard Size
15.5-25 12PR
Cab
Note (2)
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 77 dB(A).
Standard/Optional

Your time is valuable, and your business, much appreciated. Thanks for visiting our website. You can count on us for realistic answers to your equipment needs, state-of-the-art technology, experienced application specialists, flexible acquisition options and customized financing. We look forward to answering your questions.

Connect With Us!