Net Power - SAE J1349
Net Torque Rise - 1,400 rpm - SAE J1349
Rated Net Power - 2,200 rpm - ISO 9249
Net Peak Power - 1,800 rpm - EEC 80/1269
Gross Power - ISO 14396
Net Power - 2,200 rpm - SAE J1349
Net Peak Power - 1,800 rpm - SAE J1349
Gross Power - SAE J1995
Net Peak Power - 1,800 rpm - ISO 9249
Rated Net Power - 2,200 rpm - EEC 80/1269
Operating Weight - Maximum
Cab - ROPS/FOPS
Four Wheel Drive
Counterweights - Option 1
Operating Weight - Maximum - ROPS Capacity
MP Bucket (0.96 m3/1.25 yd3) - No Forks or Teeth
Dig Depth - Standard
Counterweights - Option 2
Counterweights - Option 3
Variable Flow, Axial Piston
Power Shuttle Transmission - Forward 1st
Pump Capacity at 2,200 rpm
System Pressure - Loader
Power Shuttle Transmission - Reverse 4th
Power Shuttle Transmission - Reverse 3rd
Power Shuttle Transmission - Forward 2nd
Power Shuttle Transmission - Reverse 1st
Power Shuttle Transmission - Forward 4th
Power Shuttle Transmission - Forward 3rd
System Pressure - Backhoe
Power Shuttle Transmission - Reverse 2nd
Service Refill Capacities
Engine Oil - With Filter
Transmission - Power Shuttle - 4WD
Front Axle (4WD)
Transmission - Power Shuttle - 2WD
Rear Axle - Planetaries
Front Axle (4WD) - Planetaries
Cooling System with Air Conditioning
Front Axle (2WD) - Static
Front Axle (4WD) - Dynamic
Front Axle (2WD) - Dynamic
Front Axle (4WD) - Static
Rear Axle - Static
Rear Axle - Dynamic
Foot operated brake pedals can be interlocked for roading.
Rated Net Power - SAE J1349
Forged chrome/molybdenum-steel crankshaft with salt bath nitrocarburized pins and journals.
Cab - ROPS
SAE J1040 MAY94; ISO 3741 1994
Higher low end torque for better engine/machine performance.
For durability, inlet valves are nitrided, martensitic chrome silicon steel.
Cab - FOPS
SAE J/ISO 3449 APR98 LEVEL II and ISO 3449: 1992 LEVEL II
Cylinder block is high strength, cast iron alloy of deep skirt, monobloc design for increased strength and long life.
Engine is equipped with electric fuel priming pump.
Net Peak Torque - 1,400 rpm
Cylinder head's intake and exhaust ports are precision cast to promote optimum gas flow.
Parking brake is mechanically applied through an adjustable hand lever located on the right console.
Direct electric, 12-volt starting and charging system with 880 CCA Group 31 maintenance free battery.
Regeneration is passive and does not require any input from the operator or disrupt work.
Turning Circle - (inner wheel not braked) - Outside Front Wheels
Front: 340-80R18 143B R-4; Rear: 500/70R24 157B, R-4
Dig Depth - E-Stick Extended
Front and rear crankshaft oil seals are “lip” type Viton and PTFE designs featuring an integral dust lip.
Service Refill Capacities
Engine meets U.S. EPA Tier 4 Final emission standards.
For durability, exhaust valves are nitrided, austenitic chrome manganese-nickel steel.
Turning Circle - (inner wheel not braked) - Outside Widest Loader Bucket
Self-adjusting, completely enclosed and sealed.
Front: 11L-16 (12 ply) F-3; Rear: 19.5L-24 (12 ply) R4 ATU
Standard glow plug starting aid system for efficient cold weather starting.
Front: 12.5/80-18-1810 PR I-3; Rear: 19.5L-24 12 PR R4
Cab - Sound
ANSI/SAE J1166 OCT98 is 79 dB(A)
Front: 340/80R18 XMCL 142A8; Rear: 500.70R24 XMCL 157A8
Three-ring pistons made of lightweight, silicon/aluminum alloy for strength and maximum thermal conductivity.
Rated Net Power - ISO 9249
Direct injection fuel system provides accurate fuel delivery and efficiency.
Front: 12-16.5 (10 ply); Rear: 19.5L-24 (12 ply) ATU
Brakes meet the following standards: SAE J1473 and ISO 3450 requirements.
Front: 12-16.5 (12 ply); Rear: 19.5L-24 (12 ply) ATU, 20 PITCH
Parking/secondary brakes are independent of the service brake system.
Service Refill Capacities
Requires ultra-low sulfur fuel less than or equal to 15 ppm fuel sulfur.
High contact ratio/gear train, peripheral fixed isolation top cover and open deck block design reduce bare engine noise.
Dry-type axial seal air cleaner with integral precleaner, automatic dust ejection system, and filter condition indicator.
Cylinder head is high strength, cast iron alloy construction with extra duty wall and deck thickness.
Front: 340-80R18 143B R-4; Rear: 19.5L-24, 12, ATU
SAE J/ISO 3450; ISO 3450 1996
SAE J188 JUN86 is 76 dB(A)
Alternator, 150 amp
Audible system fault alarm
Backhoe controls, mechanical two lever
Battery, maintenance-free, 880 CCA
Battery disconnect switch
Battery remote jumpstart
Boom transport lock
Brace, lift cylinder
Brake, secondary parking
Brakes, hydraulically boosted, oil disc, dual pedals, interlocking
Bucket level indicator
Coolant/antifreeze, extended life
Dome light (cab only)
Diagnostic port for engine
Differential lock, loader joystick
Drink holders, two
Engine, Cat C3.4B, meets U.S. EPA Tier 4 Final emission standards, diesel particulate filter
Engine enclosure, sound suppression removal panels
Face seals, O-ring
Fan, suction and guard
Fast reversing shuttle, all gears
Filters, spin-on: fuel, engine oil, transmission oil, water separator
Filters, bowl and cartridge: hydraulic fluid
Flashing hazards/signal lights
Fuel tank, fully enclosed
Fully hinged front grill for cooling package cleaning access
Gauge cluster: coolant temperature, fuel level, torque converter temperature, battery voltage
Ground level fuel fill
High ambient cooling package
Hood lock, inside cab
Hydraulic hose, XT™
Hydraulic oil cooler
Hydraulic oil level sight gauge
Hydraulic valve, hydrostatic steering
Hydraulic valves, loader 2 function
Hydraulic valves, backhoe 4 function
Hydraulics, load sensing with variable displacement piston pump
Indicator lights: wait to start, water in fuel, engine warning, warning lamp, object handling stability warning, manual regeneration required, low engine oil pressure; LCD warnings: machine locked (if equipped), service due, air filter blocked, auto idle shutdown, high coolant temperature, high torque converter temperature, high exhaust temperature, engine oil life indicator
Instrument panel lights
Key start/stop system
LCD screen: engine speed, hour meter, gear/direction, battery voltage, hydraulic oil temperature, torque converter temperature, coolant temperature, trip totals (fuel and hours), lifetime totals (fuel and hours), operator settings (units, brightness, programmable hoe auxiliary flow), service mode diagnostics, oil life reset, DPF force regeneration, maintenance intervals, ECM/system info
Lights, working (2 front, 2 rear)
Loader, self-leveling, return-to-dig and transmission disconnect switch
Loader, single tilt
Open circuit breather
Power receptacle, 12 volt, 2 internal, 1 external
Power steering, hydrostatic
Seat belt, retractable, 51 mm (2 in)
Stabilizer shoes, street
Seat, air suspension, fabric or vinyl cover, with armrest
Socket, two roof
Starting system, glow plugs
Storage compartment, lockable
Stop and tail lights
Swing transport lock
Toolbox, external, lockable
Throttle, hand and foot, electronic
Transmission, four speed, syncromesh
Transmission neutralizer switch
Two Wheel Drive
Vandalism locks, three
Warning horn, electric
Backhoe controls, pilot joysticks
Battery, additional, 880 CCA
Cold weather fuel (–30° C/–22° F)
Cold weather package, including additional battery, engine block heater, radiator antifreeze (–50° C/–58° F), cold weather fuel (–30° C/–22° F) and mounting for an ether bottle
Counterweights, 115 kg (255 lb), 240 kg (530 lb) or 460 kg (1,015 lb)
Fenders, front with integral steps
Four Wheel Drive/Brake Mode Selector
Guard, boom protection plate
Guard, stabilizer, rock
Hydraulic valves, loader (3rd valve for GP, MP or Quick Coupler)
Hydraulic valves, backhoe (5th and 6th function)
Hydraulic lines, combined function auxiliary
Product Link, satellite, PL631E
Product Link, cellular, PL641I
Quick Coupler, hydraulic, dual lock
Quick Coupler, manual, dual lock
Quick Coupler, pin lock
Radio and CD player
Radio and CD player, Bluetooth
Rotating beacon, magnetic mount
Seat belt, 75 mm (3 in)
Security system keypad
Stabilizer pads, grouser type
Stabilizer pads, reversible
Vandalism protection, gauge cover
Work Tool Attachments such as buckets, forks, material handling arms, augers, hammers, brooms, cold planers and vibratory plate compactors. See your Cat dealer for more information.