Engine
Engine Model
Gross Power - SAE J1995
Gross Power - VR Engine - SAE J1995
Gross Power - Tier 3 Engine - SAE J1995
Bore
Stroke
Displacement
Gross Power - Equivalent to U.S. EPA Tier 3/EU Stage IIIA - SAE J1995
Note (1)
Power ratings apply at a rated speed of 2,000 rpm when tested under the reference conditions for the specified standard.
Note (2)
Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F).
Note (3)
Engine derate will commence at an altitude of 2700 m (8,858 ft).
Rated Power
Note (5)
Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU Stage IIIA is also available.
Note (4)
Optional Ventilation Reduction package available.
Operating Specifications
Nominal Payload Capacity
Gross Machine Mass
Weights
Empty
Loaded
Empty - Rear Axle
Loaded - Rear Axle
Empty - Front Axle
Loaded - Front Axle
Weight Distribution
Empty - Front Axle
Loaded - Front Axle
Loaded - Rear Axle
Empty - Rear Axle
Transmission
Forward - 1
Forward - 2
Forward - 3
Forward - 4
Forward - 5
Forward - 6
Forward - 7
Reverse - 1
Reverse - 2
Note
Maximum travel speeds with standard 29.5 × R29 tires.
Final Drives
Differential Ratio
Final Drive Ratio
Total Reduction Ratio
Body Hoist
Raise
Lower
Total Cycle Time
Body Capacities
Ejector Body
Dump Body - 1
Dump Body - 3
Note
Dump Body - 2 - Standard
Turning Dimensions
Articulation Angle
Frame Oscillation
Outside Clearance Radius*
Inside Clearance Radius*
Service Refill Capacities
Engine Crankcase - With Filter
Transmission
Hydraulic Tank
Cooling System
Front Differential and Final Drives
Rear Differential and Final Drives
Fuel Tank
Tires
Tire Size
Standards
Standards
Operating Specifications
Body Capacities
18.0-25.1 m³ (23.5-32.8 yd³)
Turning Dimensions
Note
*Clearance dimensions are for reference only.