Emissions - U.S. EPA Tier 3/EU Stage IIIA Equivalent Engine - Engine Power - ISO 14396:2002
Emissions - Ventilation Reduction (VR) Engine - Engine Power - ISO 14396:2002
Engine derate will commence at an altitude of 2743 m (8,999 ft).
All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifications in 40 CFR Part 1065 and EU specifications in Directive 97/68/EC with a density of 0.845-0.850 kg/L @ 15° C (7.05-7.09 lb/gal @ 59° F) and fuel inlet temperature 40° C (104° F).
Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard.
Optional Ventilation Reduction package available.
Optional engine with emissions equivalent to Tier 3 and EU Stage IIIA is also available.
Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU stage IIIA is also available.
Nominal Payload Capacity
Gross Machine Mass
Empty - Rear Axle
Loaded - Front Axle
Loaded - Rear Axle
Empty - Front Axle
Forward - 1
Forward - 2
Forward - 3
Forward - 4
Reverse - 1
Maximum travel speeds with standard 26.5 × R25 tires.
Final Drive Ratio
Total Reduction Ratio
Total Cycle Time
Body 2 - Standard Body
Ejector Body (1)
Ejector Body (2)
Outside Clearance Radius
Inner Clearance Radius
Service Refill Capacities
Engine Crankcase - With Filter
Front Differential and Final Drives
Rear Differential and Final Drives
11.3-17.5 m³ (14.8-22.9 yd³)
Weights (Other Engine Models)
Operating Mass - Front Axle
Operating Mass + Rated Payload
Operating Mass + Rated Payload - Rear Axle
Operating Mass + Rated Payload - Front Axle
Operating Mass - Rear Axle