Engine
Engine Model
Net Power
Gross Power - SAE J1995
Net Power - SAE 1349
Displacement
Bore
Stroke
Net Power - ISO 9249
Weights
Operating Weight
Operating Specifications
Tipping Load
Breakout Force - Tilt Cylinder
Ground Pressure - With 320 mm/12.6 in Track
Ground Contact Area - With 320 mm/12.6 in Track
Rated Operating Capacities - 50% Tipping Load
Dimensions
Length - Track on Ground
Overall Length - Track
Height - Top of Cab
Ground Clearance
Departure Angle
Maximum Dump Angle
Vehicle Width (400 mm/15.7 in tracks)
Turning Radius from Center - Coupler
Turning Radius from Center - Bucket
Maximum Overall Height
Length - With Bucket on Ground
Bucket Pin Height - Carry Position
Reach - Maximum Lift/Dump
Bucket Pin Height - Maximum Lift
Rack Back Angle - Maximum Height
Turning Radius from Center - Machine Rear
Length - Without Bucket
Maximum Reach - With Arms Parallel to Ground
Clearance at Maximum Lift and Dump
Vehicle Width (320 mm/12.6 in tracks)
Hydraulic System
Hydraulic Flow - High Flow - Loader Hydraulic Pressure
Hydraulic Flow - High Flow - Loader Hydraulic Flow
Hydraulic Flow - Standard - Loader Hydraulic Pressure
Hydraulic Flow - High Flow - Hydraulic Power (Calculated)
Hydraulic Flow - Standard - Loader Hydraulic Flow
Hydraulic Flow - Standard - Hydraulic Power (Calculated)
Cab
ROPS
FOPS
FOPS Level II
Power Train
Travel Speed - Forward or Reverse
Service Refill Capacities
Hydraulic Tank
Fuel Tank
Cooling System
Hydraulic System
Engine Crankcase
Operating Specifications
Ground Pressure - With 400 mm/15.7 in Track
Rated Operating Capacity with Optional Counterweight
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, 1676 mm (66 in) dirt bucket, 320 mm (12.6 in) tracks, standard flow hydraulics, C0 cab (OROPS, static seat), 880 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).
Noise Level
Note (2)
**The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Operating Specifications
Rated Operating Capacities - 35% Tipping Load
Noise Level
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Operating Specifications
Ground Contact Area - With 400 mm/15.7 in Track
Noise Level
Inside Cab**
Dimensions
Bucket Pin Reach - Maximum Lift
Weights
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, 1676 mm (66 in) dirt bucket, 320 mm (12.6 in) tracks, standard flow hydraulics, C0 cab (OROPS, static seat), 880 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).
Engine
Peak Torque - 1,500 rpm - SAE J1995
Dimensions
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, 1676 mm (66 in) dirt bucket, 320 mm (12.6 in) tracks, standard flow hydraulics, C0 cab (OROPS, static seat), 880 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).
Noise Level
Note (3)
***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Outside Cab***
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.