226D Skid Steer Loader

Product Description

The Cat® 226D Skid Steer Loader, with its radial lift design, delivers impressive mid-lift reach and excellent digging performance with outstanding drawbar power.

Specifications
Us
Metric
Engine
Engine Model
Cat C2.2 CRDI
Net Flywheel Power
65.8 HP
49.1 kW
Gross Power - SAE J1995
67.1 HP
50.1 kW
Net Power - SAE 1349
65.8 HP
49.1 kW
Displacement
134.3 in³
2.2 l
Stroke
3.9 in
100 mm
Bore
3.3 in
84 mm
Peak Torque - 1,500 rpm - SAE J1995
153 ft·lbf
208 N·m
Net Power - ISO 9249
66.5 HP
49.6 kW
Weights
Operating Weight
5705 lb
2588 kg
Operating Specifications
Rated Operating Capacity
1550 lb
703 kg
Tipping Load
3100 lb
1407 kg
Breakout Force - Tilt Cylinder
3983 lb
1807 kg
Rated Operating Capacity with Optional Counterweight
1650 lb
749 kg
Dimensions
Wheel Base
41.5 in
1054 mm
Height - Top of Cab
79.8 in
2028 mm
Vehicle Width over Tires
58.9 in
1497 mm
Ground Clearance
6.9 in
175 mm
Departure Angle
27.9°
Maximum Dump Angle
46.7°
Maximum Reach - With Arms Parallel to Ground
50.7 in
1288 mm
Bumper Overhang - Behind Rear Axle
35.2 in
894 mm
Bucket Pin Height - Carry Position
8.5 in
215 mm
Reach - Maximum Lift/Dump
21 in
533 mm
Maximum Overall Height
143.8 in
3652 mm
Length - With Bucket on Ground
127.3 in
3234 mm
Clearance at Maximum Lift and Dump
81.8 in
2077 mm
Turning Radius from Center - Coupler
43.5 in
1104 mm
Bucket Pin Height - Maximum Lift
110.9 in
2818 mm
Rack Back Angle - Maximum Height
88.9°
Length - Without Bucket
99.4 in
2524 mm
Turning Radius from Center - Machine Rear
59.6 in
1513 mm
Turning Radius from Center - Bucket
77.8 in
1977 mm
Hydraulic System
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure
3336 psi
23000 kPa
Hydraulic Flow - Standard - Hydraulic Power (Calculated)
35.5 HP
26.5 kW
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow
26 gal/min
99 l/min
Hydraulic Flow - Standard - Loader Hydraulic Flow
18 gal/min
69 l/min
Hydraulic Flow - Standard - Loader Hydraulic Pressure
3336 psi
23000 kPa
Hydraulic Flow - High Flow - Hydraulic Power (Calculated)
50.9 HP
38 kW
Cab
ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level I
FOPS Level II
ISO 3449:2005 Level II
Power Train
Travel Speed - Forward or Reverse - One Speed
7.6 mile/h
12.3 km/h
Travel Speed - Forward or Reverse - Two Speed Option
11.1 mile/h
17.8 km/h
Service Refill Capacities
Cooling System
3.2 gal (US)
12 l
Engine Crankcase
2.6 gal (US)
10 l
Fuel Tank
15.1 gal (US)
57 l
Hydraulic System
11.9 gal (US)
45 l
Hydraulic Tank
9 gal (US)
34 l
Chain Box - Each Side
1.8 gal (US)
7 l
Noise Level
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Dimensions
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1524 mm (60 in) dirt bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C0 cab (OROPS, static seat), 880 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).
Noise Level
Outside Cab**
102 dB(A)
102 dB(A)
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
Weights
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1524 mm (60 in) dirt bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C0 cab (OROPS, static seat), 880 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).
Operating Specifications
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1524 mm (60 in) dirt bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C0 cab (OROPS, static seat), 880 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).
Noise Level
Inside Cab*
83 dB(A)
83 dB(A)
Note (3)
**The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Note (2)
*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Standard/Optional

Standard Equipment

ELECTRICAL
OPERATOR ENVIRONMENT
POWER TRAIN
OTHER
MANDATORY EQUIPMENT

Optional Equipment

OPTIONAL EQUIPMENT

Your time is valuable, and your business, much appreciated. Thanks for visiting our website. You can count on us for realistic answers to your equipment needs, state-of-the-art technology, experienced application specialists, flexible acquisition options and customized financing. We look forward to answering your questions.

Connect With Us!