Base Power (1st Gear) - Net
Speed at Rated Power
Tier 4 Final/Stage IV, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent
Maximum Altitude - Full Power
Maximum Altitude - Full Power (Tier 2)
Maximum Altitude - Full Power (Tier 3)
Maximum Torque - VHP Plus
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
Optimized VHP Plus is standard for the 14M3.
Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
Power as declared per ISO 14396 – Rated rpm 1,850 – VHP+ = 228 kW (306 hp)
Standard - Fan Speed - Minimum
Number of Cylinders
Circle - Outer Diameter
Front Axle - Total Oscillation per Side
Front Axle - Wheel Lean - Left/Right
Blade Height - With Cutting Edge
Blade Height - Without Cutting Edge
Blade Width - With End Bits
Blade Width - Without End Bits
Maximum Depth of Cut
Blade Tip Range - Backward
Blade Tip Range - Forward
Circle Centershift - Left
Circle Centershift - Right
Maximum Lift Above Ground
Maximum Shoulder Reach Outside of Tires - Left
Maximum Shoulder Reach Outside of Tires - Right
Moldboard Sideshift - Left
Moldboard Sideshift - Right
Operating Weight - Typically Equipped
Gross Vehicle Weight - Base* - Front Axle
Gross Vehicle Weight - Base* - Rear Axle
Gross Vehicle Weight - Base* - Total
Gross Vehicle Weight - Typically Equipped - Front Axle
Gross Vehicle Weight - Typically Equipped - Rear Axle
Gross Vehicle Weight - Typically Equipped - Total
Air Conditioning System
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton).
Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: – Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Standard - Fan Speed - Maximum
*Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab.