Engine
Net Power - ISO 9249
Emissions
Engine Model
Maximum Power - 1,700 rpm - SAE J1995
Displacement
Weights
Operating Weight
Buckets
Bucket Capacities
4.6-12.0 m³ (6.0-15.75 yd³)
Operating Specifications
Static Tipping Load - Full 40° Turn - With Tire Deflection
Breakout Force
Static Tipping Load - Full 40° Turn - No Tire Deflection
Transmission
Reverse - 1
Forward - 1
Forward - 3
Reverse - 2
Reverse - 3
Forward - 4
Forward - 2
Hydraulic System
Implement System - Maximum Operating Pressure
Implement System - Maximum Pump Output at 2,250 rpm
Hydraulic Cycle Time - Total
Service Refill Capacities
Differential - Final Drives - Front
Differential - Final Drives - Rear
Cooling System
Crankcase
Hydraulic Tank
Fuel Tank
Transmission
Sound
With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008)
With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013)
Note (1)
*Distance of 15 m (49.2 ft), moving forward in second gear ratio.
Engine
Maximum Net Power - 1,700 rpm - SAE J1349 - Metric
Dimensions - Standard Lift
Hinge Pin Height at Maximum Lift
Lift Arm Clearance at Maximum Lift
Rack Back - Carry Height
Height - Top of ROPS
Engine
Maximum Power - 1,700 rpm - ISO 14396 - Metric
Transmission
Reverse - 4
Engine
Maximum Power - 1,700 rpm - SAE J1995 - Metric
Weights
Note
Weight based on a machine configuration with Bridgestone 875/65R29 VLTS L4 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link™, open differential axles, secondary steering, sound suppression, and a 6.1 m³ (8.0 yd³) GP bucket with BOCE.
Dimensions - Standard Lift
Height - Top of Exhaust Pipe
Overall Length - Without Bucket
Engine
Peak Gross Torque - 1,200 rpm - SAE J1995
Dimensions - Standard Lift
Wheel Base
Engine
Peak Gross Torque - 1,200 rpm - ISO 14396
Dimensions - Standard Lift
Ground Clearance
Engine
Maximum Net Power - 1,700 rpm - SAE J1349
Maximum Net Power - 1,700 rpm - ISO 9249 - Metric
Dimensions - Standard Lift
Hinge Pin Height at Carry
Sound
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)**
Service Refill Capacities
DEF Tank
Engine
Note
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes.
Dimensions - Standard Lift
Maximum Width over Tires
Sound
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)**
Engine
Maximum Net Torque - 1,100 rpm
Dimensions - Standard Lift
Height - Top of Hood
Sound
With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)
Note (2)
**For machines in European Union countries and in countries that adopt the "EU Directives."
Dimensions - Standard Lift
Centerline of Rear Axle to Edge of Counterweight
Operating Specifications
Note (1)
For a machine configuration as defined under "Weight."
Transmission
Note
Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 914 mm (36 in) roll radius.
Dimensions - Standard Lift
Tread Width
Engine
Maximum Power - 1,700 rpm - ISO 14396
Dimensions - Standard Lift
Rack Back at Ground
Bucket Capacities
Bucket Range
4.6-12.0 m³ (6.0-15.75 yd³)
Engine
Maximum Net Power - 1,700 rpm - ISO 9249
Dimensions - Standard Lift
Rack Back - Maximum Lift
Operating Specifications
Note (2)
Full compliance to ISO 143971:2007 Sections 1 thru 6.
Dimensions - Standard Lift
Centerline of Rear Axle to Hitch
Note
All dimensions are approximate and based on Bridgestone 875/65R29 VLTS L4 radial tires.
Sound
Note (3)
***European Union Directive "2000/14/EC" as amended by "2005/88/EC."
Engine - Tier 4 Final/Stage IV
Emissions
Standard Equipment
NOTE
POWER TRAIN
OPERATOR ENVIRONMENT
COMPUTERIZED MONITORING SYSTEM
ELECTRICAL AND LIGHTING
CAT CONNECT TECHNOLOGIES
LINKAGE
HYDRAULICS
FLUIDS
OTHER STANDARD EQUIPMENT
Optional Equipment
NOTE
POWER TRAIN
OPERATOR ENVIRONMENT
ELECTRICAL AND LIGHTING
STARTERS, BATTERIES, AND ALTERNATORS
CAT CONNECT TECHNOLOGIES
LINKAGE
WORK TOOLS
HYDRAULICS
FLUIDS
OTHER OPTIONAL EQUIPMENT
PURPOSE BUILT SPECIALTY MODELS