Engine
Engine Model
Gross Power (SAE J1995)
Net Power (SAE J1349)
Engine Power (ISO 14396)
Bore
Stroke
Displacement
Note (1)
Advertised power is tested at 1,800 rpm.
Note (2)
Advertised power is tested per the specified standard in effect at the time of manufacture.
Note (3)
The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler, and fan at minimum speed.
Note (4)
Net power when the fan is at maximum speed is 316 kW (424 hp) per the SAE reference conditions.
Note (5)
Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards.
Note (6)
Diesel exhaust fluid (DEF) used in Cat SCR systems must meet the requirements outlined in ISO 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.
No Engine De-rating Below
Peak Engine Torque Gross (SAE J1995)
Peak Engine Torque Net (SAE J1349)
Peak Engine Torque Speed
Weights
Rated Payload
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system contains 1.1 kg (2.4 lb) of refrigerant which has a CO2 equivalent of 1.716 metric tonnes (1.891 tons).
Body Capacities
Heaped (SAE 2:1)
Struck
Tailgate Heaped SAE 2:1
Tailgate Struck
Transmission
Forward - 1
Forward - 2
Forward - 3
Forward - 4
Forward - 5
Forward - 6
Reverse - 1
Sound Levels
Interior Cab
Note (1)
The declared dynamic operator sound pressure level is 72 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the cooling fan’s maximum speed. The sound level may vary at different cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and maintained.
Note (2)
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
Operating Weights
Front Axle - Empty
Center Axle - Empty
Rear Axle - Empty
Total - Empty
Front Axle - Rated Load
Center Axle - Rated Load
Rear Axle - Rated Load
Total - Rated Load
Front Axle - Loaded
Center Axle - Loaded
Rear Axle - Loaded
Total - Loaded
Body Plate
Type
High strength Brinell HB450 wear resistant steel
Body Plate Thickness
Front Plate
Base Plate
Side Plates
Service Refill Capacities
Fuel Tank
DEF Tank
Cooling System
Hydraulic System
Engine Crankcase
Transmission
Final Drives/Differential
Output Transfer Gear Box
Body Hoist
Raise Time
Lower Time
Standards
Brakes
Cab - FOPS
Cab - ROPS
Steering
Turning Circle
Turning Dimensions - Steer Angle - Left/Right
Turning Dimensions - SAE Turning Radius
Turning Dimensions - Clearance Radius
Turning Dimensions - Inside Radius
Turning Dimensions - Aisle Width
Note
Dimensions are for machines equipped with 750/65 R25 tires.
Steering
Lock to Lock
Optimal Loader/Truck Pass Matching
Hydraulic Excavators: 349/352 - Passes
Hydraulic Excavators: 336 - Passes
Wheel Loaders: 972/972 XE - Passes
Wheel Loaders: 966/966 XE - Passes
Wheel Loader: 962 - Passes
Wheel Loader: 950 - Passes
Note
An optimum system match gives you a major productivity advantage. The 735 is an excellent match for the Cat 349 and 336 Hydraulic Excavators; and Cat 972, 966, 962 and 950 Wheel Loaders. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved.