Engine
Gross Power - SAE J1995:2014
Engine Model
Cat® C2.8TA (turbo after-cooled)
Net Power - ISO 9249
Net Power - SAE 1349
Peak Torque at 1,360 rpm SAE J1995
Displacement
Stroke
Bore
Operating Specifications
Rated Operating Capacities - 35% Tipping Load
Rated Operating Capacities - 50% Tipping Load
Rated Operating Capacity with Optional Counterweight - 35% Tipping Load
Tipping Load
Breakout Force - Lift Cylinder
Breakout Force - Tilt Cylinder
Ground Contact Area - With 450 mm/17.7 in Track
Ground Pressure - With 450 mm/17.7 in Track
Weights*
Operating Weight
Counterweight Adds to Operating Weight
Enclosed Cab Adds to Operating Weight
Note
*Operating Weight, Operating Specifications, and Dimensions are based on 2036 mm (80") low profile bucket with bolt on cutting edge, 450 mm (17.7") wide track, 75 kg (165 lb) operator, open canopy, mechanical suspension seat, HD battery with disconnect, standard flow hydraulics, manual coupler, and full fluids. No external counterweights, and no dual self-level/return-to-dig/work tool positioner
Service Refill Capacities
Cooling System
Engine Crankcase
Fuel Tank
Hydraulic System
Hydraulic Tank
Dimensions
Bucket Pin Height - Carry Position
Bucket Pin Height - Maximum Lift
Bucket Pin Reach - Maximum Lift
Clearance at Maximum Lift and Dump
Departure Angle
Ground Clearance
Height - Top of Cab
Length - Track on Ground
Length - With Bucket on Ground
Length - Without Bucket
Maximum Overall Height
Maximum Reach - With Arms Parallel to Ground
Overall Length - Track
Rack Back Angle - Maximum Height
Reach at Maximum Lift/Dump
Roll Back Angle
Turning Radius from Center - Bucket (racked)
Turning Radius from Center - Coupler
Turning Radius from Center - Machine Rear
Vehicle Width (450 mm/17.7 in tracks)
Maximum Dump Angle
Hydraulic System
Hydraulic Flow - Standard - Loader Hydraulic Pressure
Hydraulic Flow - Standard - Loader Hydraulic Flow
Hydraulic Flow - Standard - Hydraulic Power (Calculated)
Hydraulic Flow - High Flow - Loader Hydraulic Pressure
Hydraulic Flow - High Flow - Loader Hydraulic Flow
Hydraulic Flow - High Flow - Hydraulic Power (Calculated)
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow
Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated)
Power Train
Travel Speed - Forward or Reverse - One Speed
Travel Speed - Forward or Reverse - Two Speed
Cab
ROPS
FOPS
FOPS Level II
ISO 3449:2005 Level II (optional)
Noise Level
Inside Cab*
Outside Cab**
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2)
*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Note (3)
**The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Sustainability
Recyclability
Air Conditioning System (if equipped)
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf (Europe). See label or instruction manual for gas refrigerant identification. If machine is provided with R134a (Global Warming Potential = 1430), the system contains 0.85 kg (1.87 lbs) of refrigerant, which has a CO2 equivalent of 1.216 metric tons (1.34 tons). If machine is provided with R1234yf (Global Warming Potential = 0.501), the system contains 0.85 kg (1.87 lbs) of refrigerant, which has a CO2 equivalent of 0.00043 metric tons (0.00047 tons).
Standard Equipment
STANDARD EQUIPMENT
PERFORMANCE PACKAGES
COMFORT PACKAGES
TECHNOLOGY PACKAGES
RADIO
PRODUCT LINK™
COOLING FAN
GUARDING AND SEALING PACKAGES
ELECTRICAL
OPERATOR ENVIRONMENT
HYDRAULICS
POWER TRAIN
UNDERCARRIAGE
FRAME
OTHER
Optional Equipment
OPTIONAL EQUIPMENT