Engine
Engine Model
Engine Power - VR Engine - ISO 14396:2002
Bore
Stroke
Displacement
Rated Power
Gross Power - SAE J1995
Note (4)
Optional Ventilation Reduction package available.
Note (5)
Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU stage IIIA is also available.
Note (1)
Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard.
Note (2)
All rating conditions are based on ISO/TR 14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifications in 40 CFR Part 1065 and EU specifications in Directive 97/68/EC with a density of 0.845-0.850 kg/L @ 15° C (7.05-7.09 lb/gal @ 59° F) and fuel inlet temperature 40° C (104° F).
Note (3)
No engine derating required up to 3050 m (10,006 ft) altitude for equivalent Tier 3 engines, and 3506 m (11,502 ft) for VR engines.
Engine Power - Tier 3 Engine - ISO 14396:2002
Operating Specifications
Nominal Payload Capacity
Static Tipping Load - Straight Ahead - Lift Arms Horizontal
Breakout Force - SAE
Gross Machine Mass
Static Tipping Full Turn Ahead Lift Arms Horizontal
Weights
Note
Operating Mass + Rated Payload*
Operating Mass*
Operating Mass + Rated Payload* - Front Axle
Operating Mass* - Front Axle
Operating Mass* - Rear Axle
Operating Mass + Rated Payload* - Rear Axle
Transmission
Forward - 1
Forward - 2
Forward - 3
Forward - 4
Reverse - 1
Reverse - 2
Reverse - 3
Reverse - 4
Hydraulic Cycle Times
Raise
Dump
Lower, Empty, Float Down
Total Cycle Time
Bucket Capacities
Bucket Capacities
8.9-11.6 m³ (11.6-15.2 yd³)
Dump Bucket - 3
Light Material Bucket
Dump Bucket - 1 - Standard Bucket
Dump Bucket - 2
Turning Dimensions
Axle Oscillation
Articulation Angle
Inner Clearance Radius**
Note
**Clearance dimensions are for reference only.
Outside Clearance Radius**
Tires
Tire Size
Service Refill Capacities
Engine Crankcase
Front Differential and Final Drives - With Axle Oil Cooling System
Rear Differential and Final Drives - With Axle Oil Cooling System
Rear Differential and Final Drives
Front Differential and Final Drives
Hydraulic Tank
Fuel Tank
Cooling System
Transmission
Standards
Standards
Rollover Protective Structure (ROPS)/Falling Object Protective Structure (FOPS) Certified Cab