Operating Specifications
Rated Payload - Loose Material (Standard)
Rated Payload - Loose Material (High Lift)
Rated Payload - Standard (Quarry Face)
Rated Payload - High Lift (Quarry Face)
Bucket Capacity Range
8,6 m³ – 10,0 m³ (11,25 yd³ – 13,0 yd³)
Cat Truck Match - Standard
Cat Truck Match - High Lift
Engine
Net Power
Operating Specifications
Operating Weight
Buckets
Bucket Capacities
7,4-14,9 m³ (9,7-19,5 yd³)
Engine
Engine Model
Bore
Stroke
Displacement
Torque Rise
Rated Speed
Transmission
Transmission Type
Cat-Planetenlastschaltgetriebe
Forward - 1
Forward - 2
Forward - 3
Reverse - 1
Reverse - 2
Reverse - 3
Direct Drive - Forward 1
Direct Drive - Forward 2
Direct Drive - Forward 3
Direct Drive - Reverse 1
Direct Drive - Reverse 2
Direct Drive - Reverse 3
Axles
Front
Rear
Oscillation Angle
Hydraulic Cycle Times
Raise
Dump
Service Refill Capacities
Fuel Tank
Cooling System
Transmission
Engine
Rated Speed - Net Power - SAE J1349 - Standard Ambient
Hydraulic System - Lift/Tilt
Pilot System
Open loop and pressure reducing
Sound Performance - Suppression
Operator Sound Level (ISO 6396:2008)
Machine Sound Level (ISO 6395:2008)
Engine
Rated Speed - Net Power - SAE J1349 - High Ambient
Service Refill Capacities
Hydraulic Tank - Implement and Hydraulic Fan
Sound Performance - Standard
Machine Sound Level (ISO 6395:2008)
Hydraulic Cycle Times
Lower Float Down
Hydraulic System - Lift/Tilt
Maximum Flow at 1,800 rpm (1)
Hydraulic Cycle Times
Lower
Total Hydraulic Cycle Time - Empty Bucket
Engine
Rated Speed - Gross - SAE J1995
Sound Performance - Standard
Operator Sound Level (ISO 6396:2008)
Engine
Net Power - SAE J1349
Hydraulic System - Lift/Tilt
Cylinders, Double Acting - Lift, Bore and Stroke
235 mm × 1287 mm (9.3 in × 50.7 in)
Service Refill Capacities
Differential - Final Drives - Rear
Hydraulic System - Lift/Tilt
Relief Valve Setting - Lift/Tilt
Hydraulic System - Steering
Total Steering Angle
Steering System - Pump
Piston, variable displacement
Hydraulic System - Lift/Tilt
Maximum Flow at 1,800 rpm (2)
Service Refill Capacities
Differential - Final Drives - Front
Hydraulic System - Lift/Tilt
Relief Valve Setting - Main
Engine
Emissions
U.S. EPA Tier 4 Final OR Tier 2 Equivalent
Transmission
Note
Travel speeds based on Michelin 45/65R39 LD D2**L5 tires.
Engine
Rated Speed - Gross - ISO 14396
Hydraulic Cycle Times
Rack Back
Engine
Gross - ISO 14396
Peak Torque - 1,200 rpm
Hydraulic System - Steering
Steering System - Circuit
Steering
Service Refill Capacities
Hydraulic Tank - Steering and Braking
Hydraulic System - Steering
Relief Valve Setting - Steering
Service Refill Capacities
Engine Crankcase
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit
Cylinders, Double Acting - Tilt, Bore and Stroke
292.1 mm × 820 mm (11.5 in × 32.3 in)
Service Refill Capacities
Hydraulic System Factory Fill
Operator's Cab
ROPS/FOPS
ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards
Hydraulic System - Steering
Maximum Flow at 1,400 rpm
Hydraulic System - Lift/Tilt
Lift/Tilt System
Variable displacement piston
Service Refill Capacities
Note
All nonroad U.S. EPA Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214. Cat DEO‑ULS™ or oils that meet the Cat ECF-3, API CJ‑4, and ACEA E9 specification are required. For further fluid specifications and guidelines, visit: http://parts.cat.com/cda/files/3244668/7/SEBU6250-19.pdf.
Brakes
Brakes