Engine
Engine Model
Flywheel Power
Bore
Stroke
Displacement
Emissions
U.S. EPA Tier 4 Final/EU Stage IV/Korea Tier 4 Final
Engine Power - Maximum - At 2,200 rpm - ISO 14396
Net Power - 1,800 rpm - ISO 9249/SAE J1349 (DIN)
Engine Power - Maximum - At 2,200 rpm - ISO 14396 (DIN)
Net Power - 1,800 rpm - ISO 9249/SAE J1349
Engine Power - Maximum - At 2,200 rpm - SAE J1995
Transmission
1.0 Forward
1.5 Forward
2.0 Forward
2.5 Forward
3.0 Forward
0.7 Forward
0.5 Reverse
0.5 Forward
1.0 Forward (EU)
0.5 Forward (EU)
2.7 Forward
1.7 Forward
0.7 Forward (EU)
Service Refill Capacities
Fuel Tank
Cooling System
Final Drive - Each
Hydraulic Tank
Weights
Operating Weight
LGP VPAT - Landfill
XL SU - Blade
XL VPAT Landfill
Shipping Weight - LGP
Multi-Shank Ripper - With 3 Shanks
XL VPAT Foldable
Operating Weight - XL
LGP VPAT - Foldable
Shipping Weight - XL
LGP VPAT - Blade
XL VPAT Blade
Operating Weight - LGP
Undercarriage
Shoe Width - LGP
Track on Ground - LGP
Note (1)
Shoes/Side - XL
Ground Pressure - XL*
Ground Contact Area* - XL
Track Gauge - LGP
Ground Contact Area* - LGP
Track on Ground - XL
Track Gauge - XL
Track Rollers/Side - LGP
Ground Pressure - LGP*
Grouser Height - LGP
Grouser Height - XL
Shoes/Side - LGP
Track Rollers/Side - XL
Shoe Width - XL
Blades
Width - LGP VPAT - Foldable
Width - XL VPAT
Capacity - LGP VPAT - Foldable
Capacity - LGP VPAT
Width - LGP VPAT
Capacity - XL VPAT
Width - XL SU
Capacity - XL SU
Ripper
Maximum Clearance Raised - Shank Tip
Weight - With Three Shanks
Maximum Penetration - XL
Maximum Pry-out Force - LGP
Maximum Penetration Force - XL
Shank Gauge
Maximum Penetration - LGP
Pocket Spacing
Maximum Pry-out Force - XL
Shank Section
73 mm × 176 mm (2.9 in × 6.9 in)
Each Additional Shank
Maximum Penetration Force - LGP
Type
Number of Pockets
Overall Beam Width
Beam Cross Section
216 mm × 254 mm (8.5 in × 10.0 in)
Winch
Maximum Bare Drum - Line Speed
Maximum Full Drum - Line Speed
Rope Diameter - Recommended
Maximum Full Drum - Line Pull*
Maximum Bare Drum - Line Pull*
Winch Drive
Drum Capacity - 22 mm (0.88 in)
Overall Width
Cable Ferrule Size - O.D. × Length
54 mm × 67 mm (2.13 in × 2.63 in)
Winch Model
Winch Case - Width
Control
Oil Capacity
Winch and Bracket Length
Drum Diameter
Drum Width
Flange Diameter
Standards
FOPS
FOPS (Falling Object Protective Structure) meets ISO 3449-2005 Level II.
ROPS
ROPS (Rollover Protective Structure) offered by Caterpillar for the machine meets ROPS criteria ISO 3471:2008.
Brakes
Brakes meet the standard ISO 10265:2008.
Sustainability - Sound and Vibration Levels
Sound Levels - Maximum Sound Power Level - 2000/14/EC
Sound Levels - Dynamic Operator Sound Pressure Level (LpA) - ISO 6396:2008
Sound Levels - Average Exterior Sound Pressure Level - SAE J88:2006
Note
*Values are for an experienced operator in a dozing application, consult the Operating and Maintenance Manual for details.
Vibration Levels - Maximum Hand/Arm* - ISO 5349:2001
Vibration Levels - Seat Transmissibility Factor - ISO 7096:2000 - Spectral Class EM6
Vibration Levels - Maximum Whole Body* - ISO/TR25398:2006
Transmission
1.0 Reverse
1.5 Reverse
2.0 Reverse
2.5 Reverse
3.0 Reverse
Service Refill Capacities
Engine Crankcase
Power Train
Sound and Vibration - Cab
Sound Level Information for Machines in European Union Countries and in Countries that Adopt the “EU Directives.” The information below applies to only the machine configurations that have the “CE” mark on the Product Identification Plate. (1)
The declared dynamic operator sound pressure level is 76 dB(A) when “ISO 6396:2008” is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurement was conducted with the cab doors and the cab windows closed. NOTE: This dynamic operator sound pressure level is associated to a 2 dB(A) uncertainty.
Weights
Operating Weight - LGP Waste Handler
Transmission
1.7 Reverse
Maximum Drawbar Pull - 3.0 Forward
Sound and Vibration - Cab
Sound Level Information for Machines in European Union Countries and in Countries that Adopt the “EU Directives.” The information below applies to only the machine configurations that have the “CE” mark on the Product Identification Plate. (2)
If equipped, the certification label – 110 dB(A) – is used to verify the environmental sound certification of the machine to the requirements of the European Union. The value that is listed on the label indicates the guaranteed exterior sound power level (LWA) at the time of manufacture for the conditions that are specified in “2000/14/EC.” Your machine may have a different value.
Hydraulic Controls - Pressures
Maximum Steering Operating Pressure
Undercarriage
Track on Ground - XL - Fine Grading
Weights
Shipping Weight - XL Waste Handler
Operating Weight - XL Waste Handler
Undercarriage
Ground Contact Area* - XL - Fine Grading
Ground Pressure* - XL - Fine Grading
Weights
Shipping Weight - LGP Waste Handler
Sound and Vibration - Cab
Sound Level Information (1)
The operator Equivalent Sound Pressure Level (Leq) is 81.5 dB(A) when “ANSI/SAE J1166 FEB2008” is used to measure the value for an enclosed cab. The measurement was conducted at 100% of the maximum engine cooling fan speed. This is a work cycle sound exposure level. The cab was properly installed and maintained. The test was conducted with the cab doors and the cab windows closed.
Transmission
Maximum Drawbar Pull - 1.0 Forward
0.7 Reverse (EU)
Undercarriage
Track Rollers/Side - XL - Fine Grading
Hydraulic Controls - Pressures
Maximum Implement Operating Pressure
Service Refill Capacities
DEF Tank
Weights
Shipping Weight - XL Fine Grading
Engine
Note (1)
Net power advertised is the power available at the engine flywheel when the engine is equipped with the air cleaner, muffler, alternator, cooling fan at maximum speed.
Undercarriage
Shoes/Side - XL - Fine Grading
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes.
Transmission
2.7 Reverse
Undercarriage
Grouser Height - XL - Fine Grading
Hydraulic Controls - Pump
Pump Output - Steering
Transmission
0.5 Reverse (EU)
Hydraulic Controls - Pump
Angle Cylinder Flow - VPAT
Lift Cylinder Flow
Tilt Cylinder Flow
Engine
Note (3)
All non-road Tier 4 Interim and Final, Stage IIIB and IV, and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations.
Hydraulic Controls - Pump
Pump Output - Implement
Transmission
Maximum Drawbar Pull - 2.0 Forward
Undercarriage
Track Gauge - XL - Fine Grading
Engine
Note (2)
No derating required up to 3000 m (9,840 ft) altitude, beyond 3000 m (9,840 ft) automatic derating occurs.
Weights
Operating Weight - XL Fine Grading
Sound and Vibration - Cab
Sound Level Information (2)
Hearing protection may be needed when the machine is operated with an open operator station for extended periods or in a noisy environment. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained, or when the doors and windows are open for extended periods or in a noisy environment.
Winch
Note (1)
*Weight: Includes pump, operator controls, oil, mounting brackets and spacers.
Transmission
1.0 Reverse (EU)
Hydraulic Controls - Pump
Ripper Cylinder Flow
Engine
Note (4)
Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
Transmission
0.7 Reverse
Undercarriage
Shoe Width - XL - Fine Grading
Note (2)
All dimensions with SystemOne undercarriage.
Weights
Note (2)
Shipping Weight: Includes EROPS, A/C, lights, VPAT dozer, transmission, drawbar, engine enclosure, 3-valve hydraulics, 5% fuel, and Cat Comfort Series Air Suspension Seat.
Service Refill Capacities
Roller Frames XL/LGP - Each
Sound and Vibration - Cab
Sound Level Information (3)
The average exterior sound pressure level is 85.5 dB(A) when the “SAE J88 FEB2006 – Constant Speed Moving Test” procedure is used to measure the value for the standard machine. The measurement was conducted under the following conditions: distance of 15 m (49.2 ft) and “the machine moving forward in an intermediate gear ratio.”
Weights
Note (1)
Operating Weight: Includes EROPS, A/C, lights, VPAT dozer, transmission, drawbar, engine enclosure, 3-valve hydraulics, 100% fuel, and Cat Comfort Series Air Suspension Seat and operator.
Winch
Note (2)
Slow and standard speed winches are available.
Weight*