Engine
Engine Model
Gross Power
Weights
Operating Weight
Engine
Emissions (U.S. EPA Tier 4 Final): Gross Power - SAE J1995
Emissions (U.S. EPA Tier 4 Final): Net Power ISO - 9249
Emissions (Tier 2 Equivalent): Gross Power - SAE J1995
Emissions (Tier 2 Equivalent): Net Power ISO - 9249
Rated Speed
Bore
Stroke
Displacement
Peak Torque - 1,200 rpm
Torque Rise
Note (1)
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator.
Note (2)
Net torque rise meets SAE J139.
Note (3)
No engine derating required up to 3050 m (10,000 ft) altitude.
Transmission
Transmission Type
Cat Planetary Power Shift
Converter Drive - Forward 1
Converter Drive - Forward 2
Converter Drive - Forward 3
Converter Drive - Reverse 1
Converter Drive - Reverse 2
Converter Drive - Reverse 3
Direct Drive - Forward 1
Direct Drive - Forward 2
Direct Drive - Forward 3
Direct Drive - Reverse 1
Direct Drive - Reverse 2
Direct Drive - Reverse 3
Note
Travel speeds based on 45/65-45 L-5 46 ply tires.
Hydraulic System - Lift/Tilt
Output at 1,850 rpm and 6900 kPa (1,000 psi)
Cylinders, Double Acting - Lift, Bore and Stroke
177 mm × 1760 mm (0.58 ft × 5.8 ft)
Cylinder, Double Acting - Tilt and Tip, Bore and Stroke
267 mm × 286 mm (0.88 ft × 0.94 ft)
Relief Valve Setting - Lift (Large Pump)
Relief Valve Setting - Tilt (Small Pump)
Service Refill Capacities
Fuel Tank - Standard
Cooling System
Crankcase
Transmission
Differential - Final Drives - Front
Differential - Final Drives - Rear
Hydraulic System - Implement and Brakes - Tank Only
Hydraulic System - Steering and Engine Cooling Fan - Tank Only
Axles
Front
Rear
Oscillating at ±10 degrees
Maximum Single-Wheel Rise and Fall
Brakes
Brakes
Blades
Blade Capacities
25 to 45 m³ (33 to 58 yd³)
Cab
Air Conditioning
Standard air conditioning system contains environmentally friendly R134a refrigerant
Cab - ROPS/FOPS (1)
Cat cab with separate ROPS/FOPS is standard in North America, Europe and Japan.
Cab - ROPS/FOPS (2)
SAE J1040 MAY94, ISO 3471:2008, ISO 3471:2005
ROPS
ROPS meets SAE J1040 MAY94, ISO 3471:2008 and ISO 3471:1994 criteria.
FOPS
FOPS meets SAE J231 JAN81 and ISO 3449:1992 Level II criteria.
Sound Performance (1)
The dynamic operator sound pressure level is 71 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab.
Sound Performance (2)
The exterior sound pressure level for the standard machine measured at a distance of 15 m (49.2 ft) is 87 dB(A).
Sound Performance (3)
Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment.
Sound Performance (4)
The operator sound exposure Leq measured according to work cycle procedures specified in ANSI/SAE J1166 FEB08 is 71 dB(A).
Steering
Minimum Turning Radius
Total Steering Angle
Hydraulic Output at 1,850 rpm and 6900 kPa (1,000 psi)
Relief Valve Setting
Model 854K (Tier 4)
Serial Number Prefix
Model 854K (Tier 2)
Serial Number Prefix
Dimensions (Approximate)
Height - Top of ROPS
Height - Top of Exhaust Pipe
Height - Top of Hood
Ground Clearance
Centerline of Front Axle to Hitch
Centerline of Rear Axle to Edge of Bumper
Wheel Base
Length - With Blade on Ground
Standard Equipment
NOTE
ELECTRICAL
OPERATOR ENVIRONMENT
POWER TRAIN
OTHER STANDARD EQUIPMENT
TIRES, RIMS, AND WHEELS
ANTIFREEZE
Optional Equipment
NOTE
BLADES
ELECTRICAL
OPERATOR ENVIRONMENT
STARTING AIDS
MACHINE CONTROL AND GUIDANCE
MISCELLANEOUS ATTACHMENTS