Operating Specifications
Rated Operating Capacity
Weights
Operating Weight
Dimensions
Wheel Base
Length - With Bucket on Ground
Length - Without Bucket
Height - Top of Cab
Vehicle Width over Tires
Maximum Overall Height
Bucket Pin Height - Maximum Lift
Bucket Pin Height - Carry Position
Reach - Maximum Lift/Dump
Clearance at Maximum Lift and Dump
Ground Clearance
Departure Angle
Bumper Overhang - Rear Axle
Maximum Dump Angle
Rack Back Angle - Maximum Height
Bucket Pin Reach - Maximum Lift
Turning Radius from Center - Bucket
Turning Radius from Center - Coupler
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat PC 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
Maximum Reach - With Arms Parallel to Ground
Turning Radius from Center - Machine Rear
Hydraulic System
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure
Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated)
Hydraulic Flow - Standard - Hydraulic Power (Calculated)
Hydraulic Flow - Standard - Loader Hydraulic Pressure
Hydraulic Flow - Standard - Loader Hydraulic Flow
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow
Cab
ROPS
FOPS
Power Train
Travel Speed - Forward or Reverse - Two Speed Option
Travel Speed - Forward or Reverse - One Speed
Service Refill Capacities
Chain Box - Each Side
Cooling System
Engine Crankcase
Hydraulic System
Hydraulic Tank
Engine
Net Power - SAE 1349
Displacement
Stroke
Bore
Peak Torque - 1,500 rpm - SAE J1995
Net Power - ISO 9249
Engine Model
Operating Specifications
Rated Operating Capacity with Optional Counterweight
Tipping Load
Breakout Force - Tilt Cylinder
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat PC 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
Noise Level
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Inside Cab*
Note (2)
*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Outside Cab**
Weights
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat PC 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
Noise Level
Note (3)
**The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Air Conditioning System (if equipped)
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes.