Engine
Engine Model
Bore
Stroke
Displacement
Gross Power - SAE J1995
Peak Engine Torque Speed
Net Power - ISO 14396
Net Power - SAE J1349
Peak Engine Torque Net (SAE J1349)
No Engine De-rating Below
Engine Model - U.S. EPA Tier 4 Final/EU Stage IV
Peak Engine Torque Gross (SAE J1995)
Weights
Rated Payload
26.5 ton (US)
24 ton (US)
Body Capacities
Heaped (SAE 2:1)
Struck
Tailgate Heaped SAE 2:1
Tailgate Struck
Transmission
Forward - 1
Forward - 2
Forward - 3
Forward - 4
Forward - 5
Forward - 6
Reverse - 1
Sound Levels
Interior Cab
Operating Weights
Front Axle - Rated Load
Front Axle - Loaded
Front Axle - Empty
Center Axle - Loaded
Rear Axle - Loaded
Center Axle - Rated Load
Total - Empty
Total - Rated Load
Rear Axle - Rated Load
Total - Loaded
Rear Axle - Empty
Center Axle - Empty
Service Refill Capacities
Fuel Tank
Cooling System
Hydraulic System
Engine Crankcase
Transmission
Final Drives/Differential
Output Transfer Gear Box
DEF Tank
Body Hoist
Raise Time
Lower Time
Steering
Lock to Lock
Standards
Brakes
Cab - FOPS
Cab - ROPS
Steering
Body Plate
Type
High strength Brinell HB450 wear resistant steel
Turning Circle
Turning Dimensions - SAE Turning Radius
Turning Dimensions - Aisle Width
Turning Dimensions - Clearance Radius
Note
Dimensions are for machines equipped with 23.5R25 tires.
Turning Dimensions - Steer Angle - Left/Right
Turning Dimensions - Inside Radius
Engine
Emissions
The reference to Tier 4 Final/Stage IV includes U.S. EPA Tier 4 Final, EU Stage IV, Japan 2014 (Tier 4 Final), as well as Korea Tier 4 Final emission standards.
Sound Levels
Note (2)
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
Engine
Note (4)
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.
Note (3)
Net power when the fan is at maximum speed is 214 kW (287 hp) per the SAE reference conditions.
Note (1)
The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard.
Note (2)
The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
Sound Levels
Note (1)
The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed.
Standard Equipment
Dashboard Liquid Crystal Display (LCD):
Machine Operation Monitoring System includes: