Engine
Engine Model
Power - Net
Displacement
Bore
Stroke
Net Power - 2,200 rpm - SAE J1349
Note
Engine meets U.S. EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final) emission standards.
Net Power - 2,200 rpm - ISO 9249/EEC 80/1269
Transmission
Drive Pumps
Maximum Travel Speed - Forward
Relief Valve Settings
Maximum Travel Speed - Reverse
Track Motors
Weights
Operating Weight - XL
Operating Weight - LGP
Service Refill Capacities
Fuel Tank
Crankcase - With Filter
Final Drive - Each - XL
Cooling System
Final Drive - Each - LGP
Transmission - Hydraulic Tank
Hydraulic Controls
Pump Output
Relief Valve Settings
Undercarriage
Track Gauge - LGP, 762 mm (30 in)
Length - Track on Ground - XL
Length - Track on Ground - LGP
Shoe Width - LGP
Ground Pressure - XL
Shoe Width - LGP, 762 mm (30 in)
Ground Contact Area - LGP
Shoe Width - XL
Ground Contact Area - XL
Ground Pressure - LGP
Track Gauge - LGP
Ground Contact Area - LGP, 762 mm (30 in)
Ground Pressure - LGP, 762 mm (30 in)
Track Gauge - XL
Ripper
Type
Number of Shanks
Height
Weight
Overall Width
Maximum Reach - Ground Line
Maximum Digging Depth
Maximum Ground Clearance Under Tip
Winch
Weight
Winch Drive
Control
Speed
Drum Capacity - Optional Cable
Winch Length
Maximum Line Pull - Bare Drum
Throat Clearance
Maximum Line Speed - Bare Drum
Rope Diameter - Recommended
Drum Diameter
Overall Width
Rope Diameter - Optional
Maximum Line Speed - Full Drum
Maximum Line Pull - Full Drum
Drum Capacity - Recommended Cable
Drum Width
Weights
Note
Specs are for machine equipped with dozer blade, canopy ROPS, back-up alarm, operator, coolant, lubricants and full fuel tank.
Cab
FOPS
Dimensions
Ground Clearance - XL
BLADE: Blade Width at Maximum Angle - Intermediate
Undercarriage
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage
Dimensions
Width - Tractor - Standard Shoes - No Blade - LGP (770 mm/30 in)
BLADE: Blade Capacity (SAE) - Intermediate
BLADE: Blade Width at Maximum Angle - LGP
Width - Tractor - Standard Shoes - No Blade - XL
BLADE: Blade Height - Intermediate
Tractor Height - LGP
Undercarriage
Length - Track on Ground - LGP, 762 mm (30 in)
Dimensions
Ground Clearance - LGP, 770 mm (30 in) Shoes
BLADE: Blade Capacity (SAE) - LGP
BLADE: Blade Lift Height - XL
Overall Length - With Blade - LGP
Track Gauge - LGP
BLADE: Blade Capacity (SAE) - XL
BLADE: Digging Depth - XL
Track Gauge - LGP, 770 mm (30 in)
Cab
Sound Levels - SAE J1166 FEB2008
Undercarriage
Number of Shoes - Each Side - SystemOne Undercarriage
Dimensions
BLADE: Blade Width at Maximum Angle - XL
BLADE: Digging Depth - Intermediate
Width - Tractor - Standard Shoes - No Blade - LGP
Service Refill Capacities
Diesel Exhaust Fluid (DEF) Tank
Dimensions
BLADE: Blade Width - XL
Overall Length - With Blade - LGP, 770 mm (30 in) Shoes
BLADE: Blade Lift Height - Intermediate
Cab
Sound Levels - ISO 6396:2008
Dimensions
Tractor Height - LGP, 770 mm (30 in)
BLADE: Maximum Tilt - XL
BLADE: Digging Depth - LGP
Length - Basic Tractor - Without Blade - LGP
Cab
ROPS
Dimensions
BLADE: Blade Height - LGP
Tractor Height - XL
BLADE: Maximum Tilt - LGP
BLADE: Blade Cutting Edge Angle, Adjustable - XL
Track Gauge - XL
Undercarriage
Number of Rollers - Each Side
Dimensions
Length - Basic Tractor - Without Blade - LGP, 770 mm (30 in) Shoes
Ground Clearance - LGP
BLADE: Blade Lift Height - LGP
BLADE: Blade Width - Intermediate
Length - Basic Tractor - Without Blade - XL
BLADE: Blade Height - XL
BLADE: Maximum Angle (either side) - LGP
Overall Length - With Blade - XL
Weights
Operating Weight - LGP, 762 mm/30 in
Dimensions
BLADE: Blade Cutting Edge Angle, Adjustable - LGP
BLADE: Maximum Tilt - Intermediate
BLADE: Maximum Angle (either side) - Intermediate
BLADE: Maximum Angle (either side) - XL
BLADE: Blade Width - LGP
BLADE: Blade Cutting Edge Angle, Adjustable - Intermediate