907M Compact Wheel Loader

360 View Video

Product Description

The Cat 907M Compact Wheel Loader delivers high performance with outstanding versatility. On-the-go operator tuned hydraulics and drive train adjust the machine's response to the task at hand. Low sound levels, large spacious cab and intuitive controls keep you working comfortably all day long.

Specifications
Us
Metric
Engine
Net Power
74 mm H2O
55.3 kg/mm
Emissions
*The Cat C3.3B DIT engine meets U.S. EPA Tier 4 Final/EU Stage IIIB emission standards or Tier 4 Interim/Stage IIIA equivalent emission standards.
Engine Model
Cat® C3.3B DIT*
Maximum Gross Power - ISO 14396
73 mm H2O
54.6 kg/mm
Maximum Gross Power - ISO 14396 (DIN)
74 mm H2O
55 kg/mm
Maximum Gross Power - SAE J1995
74 mm H2O
55 kg/mm
Rated Net Power - 2,400 rpm - ISO 9249 (1977)/EEC 80/1269
74 mm H2O
55.3 kg/mm
Rated Net Power - 2,400 rpm - SAE J1349
73 mm H2O
54.7 kg/mm
Weights
Operating Weight
12677 lb
5750 null
Service Refill Capacities
Cooling System
4.5 gal (US)
17 l
Engine Crankcase
3 gal (US)
11.2 l
Fuel Tank
20.6 gal (US)
78 l
Hydraulic System - Including Tank
18.5 gal (US)
70 l
Operating Specifications
Rated Bucket Capacity
1.31 yd³
1 m³
Loader Hydraulic System
3rd Function Maximum Working Pressure
3408 psi
23500 kPa
Maximum Flow - Implement Pump
19 gal/min
73 l/min
Maximum Flow - Implement Pump - Auxiliary Function High Flow
31 gal/min
116 l/min
Maximum Flow - Implement Pump - Auxiliary Function Standard Flow
19 gal/min
73 l/min
Maximum Working Pressure - Implement Pump
3408 psi
23500 kPa
Relief Pressure - Tilt Cylinder Head
4496 psi
31000 kPa
Relief Pressure - Tilt Cylinder Rod
2756 psi
19000 kPa
Operating Specifications
Clearance - Full Lift and 45° Dump
7.97 ft
2429 mm
Full Turn Tipping Load
7716 lb
3500 null
Reach - Full Lift and 45° Dump
2.6 ft
792 mm
Steering Articulation Angle - Each Direction
39°
Tipping Load - Full Turn - ISO 14397-1
7339 lb
3330 null
Tipping Load - Straight - ISO 14397-1
9007 lb
4087 null
Dimensions with Bucket (Approximate) - Standard Lift - With ISO Coupler
Articulation Angle
39°
Clearance - Bucket at 45° *
8.08 ft
2478 mm
Clearance - Level Bucket**
9.92 ft
3027 mm
Departure Angle
33°
Dig Depth**
3.7 in
95 mm
Dump Angle at Full Lift
45°
Height - Bucket Pin**
10.58 ft
3227 mm
Height - Ground Clearance**
11 in
300 mm
Height - Ground to Cab**
8.42 ft
2586 mm
Length - Overall*
17.92 ft
5469 mm
Length - Wheel Base
7.08 ft
2170 mm
Machine Width
6 ft
1840 mm
Note (1)
*Vary with bucket.
Note (2)
**Vary with tire.
Note (3)
Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires.
Operating Weight
12913 lb
5859 null
Reach - Bucket at 45°*
2.33 ft
725 mm
Turning Radius - Inside of Tires
7.33 ft
2240 mm
Turning Radius - Over Bucket
14.67 ft
4489 mm
Width - Bucket
6.67 ft
2045 mm
Width - Tread Center
4.58 ft
1420 mm
Dimensions with Bucket (Approximate) - Standard Lift - With SSL Coupler
Articulation Angle
39°
Clearance - Bucket at 45° *
7.67 ft
2359 mm
Clearance - Level Bucket**
9.92 ft
3035 mm
Departure Angle
33°
Dig Depth**
4.2 in
107 mm
Dump Angle at Full Lift
45°
Height - Bucket Pin**
10.58 ft
3227 mm
Height - Ground Clearance**
11 in
300 mm
Height - Ground to Cab**
8.42 ft
2586 mm
Length - Overall*
18.42 ft
5620 mm
Length - Wheel Base
7.08 ft
2170 mm
Machine Width
6 ft
1840 mm
Note (1)
*Vary with bucket.
Note (2)
**Vary with tire.
Note (3)
Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires.
Operating Weight
12913 lb
5859 null
Reach - Bucket at 45°*
2.67 ft
820 mm
Turning Radius - Inside of Tires
7.33 ft
2240 mm
Turning Radius - Over Bucket
14.67 ft
4473 mm
Width - Bucket
6.67 ft
2045 mm
Width - Tread Center
4.58 ft
1420 mm
Engine
Maximum Gross Power
73 mm H2O
54.6 kg/mm
Buckets
Bucket Capacities
0.75 m3-1.2 m3 (1.0 yd3-1.6 yd3)
Cab
ROPS
SAE J1040 MAY94, ISO 3471-1994.
FOPS
SAE J/ISO 3449 APR98, Level II, ISO 3449 1992 Level II.
Buckets
General Purpose
1.31 yd³
1 m³
Light Material
1.57 yd³
1.2 m³
Cab
Note (1)
Cat cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2)
When properly installed and maintained, the cab offered by Caterpillar, when tested with doors, and windows closed as per work cycle procedures specified in ISO 6395 2008, results in operator sound exposure Leq (Equivalent sound pressure level) of 66 dB(A
Drive Train
Forward - High Range
22 mile/h
35 km/h
Forward - Range 1
6 mile/h
10 km/h
Forward - Range 2
12 mile/h
20 km/h
Reverse - High Range
22 mile/h
35 km/h
Reverse - Range 1
6 mile/h
10 km/h
Reverse - Range 2
12 mile/h
20 km/h
Engine
Bore
3.7 in
94 mm
Displacement
201 in³
3.3 l
Maximum Gross Torque - ISO 14396
192 ft·lbf
261 N·m
Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269
191 ft·lbf
260 N·m
Maximum Net Torque - SAE J1349
189 ft·lbf
257 N·m
Note (1)
Net power ratings are tested at the reference conditions for the specified standard.
Note (2)
Net power shown is the power available at the flywheel when the engine is equipped with alternator, air cleaner, diesel exhaust filter, and fan at minimum speed.
Note (3)
No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Note (4)
Flywheel per the SAE reference conditions with the fan at maximum speed.
Note (5)
The Cat C3.3B Tier 4 Final/Stage IIIB uses an active regeneration system which requires no operator interaction under normal conditions.
Stroke
4.7 in
120 mm
Loader Hydraulic System
Boost Flow Maximum Pressure
3191 psi
22000 kPa
Hydraulic Cycle Time - 1,000 rpm - Dump, at Maximum Lift Height
3 s
3 s
Hydraulic Cycle Time - 1,000 rpm - Float Down, Maximum Lift to Ground Level
2.6 s
2.6 s
Hydraulic Cycle Time - 1,000 rpm - Raise, Ground Level to Maximum Lift
9.6 s
9.6 s
Hydraulic Cycle Time - 1,800 rpm - Dump, at Maximum Lift Height
1.5 s
1.5 s
Hydraulic Cycle Time - 1,800 rpm - Float Down, Maximum Lift to Ground Level
2.6 s
2.6 s
Hydraulic Cycle Time - 1,800 rpm - Raise, Ground Level to Maximum Lift
5.5 s
5.5 s
Hydraulic Cycle Time - 1,800 rpm - Total Cycle Time
9.6 s
9.6 s
Lift Cylinder, Double Acting - Bore Diameter
3 in
75 mm
Lift Cylinder, Double Acting - Rod Diameter
2 in
50 mm
Lift Cylinder, Double Acting - Stroke
27.4 in
695 mm
Tilt Cylinder, Double Acting - Bore Diameter
3.5 in
90 mm
Tilt Cylinder, Double Acting - Rod Diameter
2.2 in
55 mm
Tilt Cylinder, Double Acting - Stroke
16.4 in
417 mm
Service Refill Capacities
Axles - Front
N/A
Axles - Rear
N/A
Hydraulic Tank
12.2 gal (US)
46 l
Transmission - Gear Box
2.2 gal (US)
8.5 l
Steering
Maximum Steering Torque - 0° (Straight Machine)
37155 ft·lbf
50375 N·m
Maximum Steering Torque - 39° (Full Turn)
27747 ft·lbf
37620 N·m
Maximum Working Pressure - Steering Pump
3191 psi
22000 kPa
Nominal Flow - Steering Pump
12 gal/min
43.9 l/min
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
<6 turns
Steering AC Cycle Times - Full Left to Full Right - 2,620 rpm
3 s
3 s
Steering Articulation Angle - Each Direction
39°
Steering Cylinder, Double Acting - Bore Diameter
3.1 in
80 mm
Steering Cylinder, Double Acting - Rod Diameter
1.4 in
35 mm
Steering Cylinder, Double Acting - Stroke
11.8 in
300 mm
Tires
Note (1)
*Standard tire.
Note (2)
Other tire choices available, contact your Cat dealer for details.
Note (3)
In certain applications, the loader's productive capabilities may exceed the tires' tonnes-km/h (ton-mph) capabilities.
Note (4)
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Option (1)
335/80 R18 XZSL Michelin
Option (2)
340/80 R18 AT-R Firestone
Option (3)
340/80 R18 XMCL Michelin
Option (4)
340/80 R18 TRI2 Nokian
Option (5)
340/80 R18 Bibload Michelin
Option (6)
405/70 R18 SPT9 Dunlop*
Option (7)
12.5/80 R18 Flexport™
Weights
Note
Specifications shown are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, Dunlop 405/70 SPT9 tires, full fuel, comfort EROPS cab, standard flow hydraulics and skid-steer coupler. – 907M is configured w
Standard/Optional

Standard Equipment

TRANSMISSION AND HYDRAULICS
ENGINE
ELECTRICAL
GENERAL
OPERATOR ENVIRONMENT

Optional Equipment

TRANSMISSION AND HYDRAULICS
ENGINE
ELECTRICAL
GENERAL
FLUIDS
LOADER
WORK TOOLS
OPERATOR ENVIRONMENT

Your time is valuable, and your business, much appreciated. Thanks for visiting our website. You can count on us for realistic answers to your equipment needs, state-of-the-art technology, experienced application specialists, flexible acquisition options and customized financing. We look forward to answering your questions.

Connect With Us!