General
Engine Output - SAE J1995
Bucket Payload
Operating Weight
Note
Specifications above apply to Backhoe configuration. Face Shovel and Frontless configurations are also available.
Hydraulic System with Pump Managing System
Hydraulic Tank Capacity - AC Version - Approximately
Maximum Pressure - Swing Pumps
Swing Pumps - Maximum Oil Flow - AC Version
3 × 491 L/min (3 × 130 gal/min)
Main Pumps - Diesel Version
4 × variable swash plate pumps
Main Pumps - AC Version
4 × variable flow axial piston pumps
Maximum Pressure - Travel
Hydraulic Tank Capacity - Diesel Version - Approximately
Maximum Pressure - Attachment
Swing Pumps - Maximum Oil Flow - Diesel Version
4 × 321 L/min (4 × 85 gal/min)
Total Volume of Hydraulic Oil - AC Version - Approximately
Total Volume of Hydraulic Oil - Diesel Version - Approximately
Swing Pumps - AC Version
3 × reversible swash plate pump
Main Pumps - Maximum Oil Flow - AC Version
4 × 746 L/min (4 × 197 gal/min)
Swing Pumps - Diesel Version
4 × reversible swash plate pump
Main Pumps - Maximum Oil Flow - Diesel Version
4 × 724 L/min (4 × 191 gal/min)
Hydraulic Oil Cooling
Features (1)
Cooling system fully independent of all main circuits, i.e. controlled cooling capacity is available whenever engine is running
Components (1)
Gear type cooling pumps supplying high-volume, low-pressure oil to aluminum coolers
Oil Flow of Cooling Pumps - AC Version
4 × 379 L/min (4 × 100 gal/min)
Features (2)
Fan speed is thermostatically controlled
Components (2)
Variable axial piston pumps supplying low-volume, high-pressure oil to fans
Diameter - Fan
Oil Flow of Cooling Pumps - Diesel Version
2 × 799 L/min (2 × 211 gal/min)
Features (3)
Extremely high cooling efficiency to ensure optimum oil temperature
Operator's Cab
Board Control System (BCS III) Features (6)
Graphic charts of logged data
Components (4)
Windshield with parallel intermittent wiper/washer
Board Control System (BCS III) Features (1)
USB, Lan (TCP/IP) and CAN BUS interfaces for data export
Components (5)
All-round safety glass, armored windshield and sliding side window
Components (7)
Under roof mounted heating ventilating and air conditioning system
Board Control System (BCS III) Features (5)
On-screen troubleshooting assistance
Board Control System (BCS III) Features (3)
Robust instrument panel including large (12 in) colored touch screen for intuitive handling
Internal Dimensions of Cab - Height
Components (11)
Sliding emergency ladder (kick-down type) with ladder cage
Internal Dimensions of Cab - Width
Components (10)
External sun shields at side and rear windows
Components (3)
Roller blinds at all windows
Operator's Eye Level - Approximately
Components (1)
Switch in seat cushion to automatically neutralize the hydraulic controls when operator leaves the seat
Components (2)
Pneumatically cushioned and multi-adjustable comfort seat with lumbar support, seat heating, safety belt, head- and armrests
Board Control System (BCS III) Features (7)
Fault memory with storage of related conditions
Internal Dimensions of Cab - Length
Components (6)
FOPS (rock guard; approved according to DIN ISO 3449) integrated into cab structure
Components (9)
Fold-away auxiliary seat with safety belt
Components (12)
Machine access via retractable access stairway, stairway angle approximately 45°, hydraulically operated
Board Control System (BCS III) Features (2)
On-screen PDF documentation (e.g. operating instructions, technical handbook, spare parts catalog, electric circuit diagram)
Components (8)
Joystick controls integrated in independently adjustable seat consoles
Board Control System (BCS III) Features (4)
Electronic monitoring, data logging & diagnostic system for vital signs & service data of engines, hydraulic & lube systems
Components (13)
Robust instrument panel including large colored BCS screen with transflective technology
Swing System
Features (4)
All raceways and the internal gearing of swing ring supplied by automatic central lubrication system
Features (1)
Dirt wipers at swing ring to prevent build-up of debris between swing ring and carbody
Swing Ring
Triple-race roller bearing with sealed internal gearing
Maximum Swing Speed - Diesel Version
Swing Drive
3 compact planetary transmissions with axial piston motors
Maximum Swing Speed - AC Version
Parking Brake
Wet multiple disc brake, spring-loaded/hydraulically released
Features (3)
Hydraulic braking of the swing motion by counteracting control
Features (2)
Closed-loop swing circuit with torque control
Undercarriage
Components (6)
Automatic hydraulic retarder valve to prevent over-speed on downhill travel
Gradeability - Travel Drives - Maximum
Components (5)
Fully hydraulic self-adjusting track tensioning system with membrane accumulator
Components (1)
All running surfaces of sprockets, idlers, rollers and track links are hardened
Track Pads - Each Side
Components (4)
All teeth contact areas of sprocket and pad links are hardened
Travel Speed - 1st Stage - Maximum
Travel Speed - 2nd Stage - Maximum
Bottom Rollers - Each Side
Travel Drives - Each Side
1 planetary transmission with 2 two-stage axial piston motors
Maximum Tractive Force
Components (2)
Parking Brake
Wet multiple disc brake, spring applied/hydraulically released
Support Rollers - Each Side
2 plus a skid plate in between
Components (3)
Cast double-grouser combined pad-links with bushings connected by hardened full floating pins
Automatic Lubrication System
Type (2)
System failures displayed by Board Control System
Type (4)
Connected to the lubrication system are: - pivot points of attachment, bucket and cylinders
Capacity - Grease Container
Type (5)
Connected to the lubrication system are: - raceways of the swing roller bearing - two greasing pinions for the internal gearing of the swing ring
Type (1)
Dual-circuit system with hydraulically driven heavy-duty pumps and electronic time relay control adjust the pause/lube times
Type (3)
Grease filters (200 μm) between service station and container, as well as directly behind grease pump
Operating Weights
6040 FS - Ground Pressure
6040 - Ground Pressure
6040 - Note
Other track pads available on request
6040 - Operating Weight
6040 FS - Operating Weight
6040 FS - Note
Other track pads available on request
6040 FS - Standard Track Pads
6040 - Standard Track Pads
Electrical System - Diesel Drive
Batteries in Series/Parallel Installation
6 × 210 Ah - 12V each; 630 Ah - 24V in total
Components (4)
10 LED high-brightness working flood lights - 8 for working area - 2 for rear end
Components (1)
Components (2)
Battery isolation relays and switches
Components (5)
2 LED high-brightness access flood lights
Components (3)
Emergency stop switches accessible from ground level, in engine module and in operator's cab
System Voltage
Retractable Service Station
Installation
Retractable service station installed underneath the engine module and easily accessible from ground
Attachments
All buckets (FS and BH) are equipped with a wear package consisting of: (2)
- Wing shrouds on side walls - Heel shrouds at bottom edges
Type (8)
Guards for shovel cylinders (FS)
Diesel Engines
Maximum Altitude - Without Deration - At 10° C Above Sea Level
Bore
Components (1)
Additional high-capacity water separator
Emissions
Fuel Tank Capacity
Total Rated Net Power - ISO 3046/1
1516 kW 1,750 min-1 (2,032 hp 1,750 min-1)
Components (3)
Components (4)
Microprocessed engine management
Total Rated Gross Power - SAE J1995
1516 kW 1,750 min-1 (2,032 hp 1,750 min-1)
Displacement
Alternators
Make/Model
Stroke
Number of Cylinders - Each Engine
Components (2)
Two-stage fuel filter including water separator
Aspiration
Turbocharged and air-to-air aftercooled
Components (5)
Hydraulically driven radiator fan with electronically controlled fan speed
Total Rated Net Power - SAE J1349
1516 kW 1,750 min-1 (2,032 hp 1,750 min-1)
Attachments
Type (1)
Inspection hole in monoboom BH
Type (2)
Pressure-free lowering of boom (FS and BH) and stick (FS) by means of a float valve
Shovel attachment with unique TriPower kinematics ensuring the following main features: (1)
- Automatic roll-back limiter to prevent material spillage - Kinematic assistance to hydraulic forces
Type (7)
Boom and sticks are torsion-resistant, welded box design of high-tensile steel with massive steel casting at pivot areas
Type (5)
Welding procedures allow for internal counter-welding (double prep weld) wherever possible
Type (3)
Special wear packages for highly abrasive materials on request
Type (6)
Boom and sticks are stress-relieved after welding
Shovel attachment with unique TriPower kinematics ensuring the following main features: (3)
- Constant boom momentum throughout the whole lift arc - Crowd force assistance
All buckets (FS and BH) are equipped with a wear package consisting of: (1)
- Special liner material covering main wear areas inside and outside of bucket - Lip shrouds between teeth
Shovel attachment with unique TriPower kinematics ensuring the following main features: (2)
- Horizontal automatic constant-angle bucket guidance - Vertical automatic constant-angle bucket guidance
Type (4)
Catwalks with rails at boom (FS and BH)
Engine
Gross Power - SAE J1995
Note
Electric drive option available (1400 kW) on 6040 AC/6040 AC FS
Net Power - SAE J1349
Engine Model
Bucket
Bucket Capacity - Face Shovel (heaped 2:1)
Bucket Capacity - Backhoe (heaped 1:1)
Operating Specifications
Operating Weight - Backhoe
Bucket Payload
Operating Weight - Face Shovel
Electric Motor - 6040 AC/6040 AC FS
Voltage
6.6 kV ±10% (other on request)
Type (2)
Custom-made electric motor with increased gap between rotor and stator to withstand severe mining conditions
Frequency
Rated Current IN
Output
Type (1)
Power limit control by Pump Managing System
Type (3)
Squirrel cage induction motor
Starting current
350% of IN (197% of IN Optional)
Revolutions
1,500 min-1 (1,800 min-1 at 60 Hz)