D6T Track-Type Tractor

360 View Video

Product Description

The new D6T dozer makes high efficiency dozing as easy as driving your pickup truck. A smooth-shifting, fully automatic four-speed Cat® transmission continuously optimizes the power train for the application. You save fuel and operator effort, without sacrificing durability, power or productivity. Work smarter too, with a full range of Cat Connect GRADE technology features to fit your job site needs.

Specifications
Us
Metric
Engine
Engine Model
Cat C9.3 ACERT™
Flywheel Power
215 hp
161 kW
Displacement
567 in3
9.3 L
Net Power (Maximum) – 1,200 rpm: ISO 9249/SAE J1349
245 hp
183 kW
Emissions
U.S. EPA Tier 4 Final
Net Power (Rated) – 2,200 rpm: ISO 9249/SAE J1349
215 hp
161 kW
Note
All non road Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations.
Note
Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
Weights
Operating Weight
47138 lb
21382 kg
Operating Weight
XL A
47846 lb
21703 kg
XL SU
47138 lb
21382 kg
XL VPAT
53042 lb
24060 kg
XW A
49797 lb
22588 kg
XW SU
48909 lb
22185 kg
XW VPAT
54045 lb
24515 kg
LGP S
51385 lb
23299 kg
LGP A
53829 lb
24417 kg
Blades – Capacity
XL SU-Blade
7.26 yd3
5.55 m3
XL A-Blade
5.17 yd3
3.95 m3
XL VPAT-Blade
6.07 yd3
4.64 m3
XW SU-Blade
7.38 yd3
5.64 m3
XW A-Blade
5.69 yd3
4.35 m3
XW VPAT-Blade
6.57 yd3
5.02 m3
LGP S-Blade
4.96 yd3
3.79 m3
LGP A-Blade
6.46 yd3
4.94 m3
Service Refill Capacities
Fuel Tank
97.2 gal
368 L
Cooling System
12.2 gal
46 L
Engine Crankcase
6.5 gal
24.6 L
Power Train
39.1 gal
148.0 L
Final Drives (each)
3.6 gal
13.5 L
Hydraulic Tank
16.5 gal
62.5 L
Dimensions – XL
Width of Tractor Without Trunnions (standard track)
8.00 ft
2440 mm
Machine Height to Product Link Antenna(1)
10.67 ft
3253 mm
Length of Track on Ground
9.25 ft
2814 mm
Length of Basic Tractor(2)
13.83 ft
4210 mm
Ground Clearance
15 in
375 mm
Ground Pressure (ISO 16754)(3)
8.66 psi
59.7 kPa
Note
(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Note
(2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Note
(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Dimensions – XW
Width of Tractor Without Trunnions (standard track)
9.17 ft
2792 mm
Machine Height to Product Link Antenna(1)
10.67 ft
3253 mm
Length of Track on Ground
9.25 ft
2814 mm
Length of Basic Tractor(2)
13.83 ft
4210 mm
Ground Clearance
15 in
375 mm
Ground Pressure (ISO 16754)(3)
6.64 psi
45.8 kPa
Note
(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Note
(2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Note
(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Dimensions – LGP
Width of Tractor Without Trunnions (standard track)
10.50 ft
3201 mm
Machine Height to Product Link Antenna(1)
10.83 ft
3303 mm
Length of Track on Ground
10.67 ft
3245 mm
Length of Basic Tractor(2)
14.50 ft
4415 mm
Ground Clearance
16 in
406 mm
Ground Pressure (ISO 16754)(3)
5.11 psi
35.2 kPa
Note
(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Note
(2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Note
(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Dimensions – XL VPAT
Width of Tractor Without Trunnions (standard track)
8.92 ft
2717 mm
Machine Height to Product Link Antenna(1)
10.67 ft
3253 mm
Length of Track on Ground
9.25 ft
2814 mm
Operating Weight
LGP VPAT
54526 lb
24733 kg
Service Refill Capacities
DEF Tank
4.5 gal
17.1 L
Roller Frames (each)
6.6 gal
25.0 L
Pivot Shaft Compartment
1.3 gal
5.0 L
Blades – Capacity
LGP VPAT-Blade
6.57 yd3
5.02 m3
Blades – Width
XL SU-Blade
10.7 ft
3261 mm
XL A-Blade
13.7 ft
4160 mm
XL VPAT-Blade
12.7 ft
3880 mm
XW SU-Blade
11.7 ft
3562 mm
XW A-Blade
14.8 ft
4520 mm
XW VPAT-Blade
13.7 ft
4160 mm
LGP S-Blade
13.3 ft
4063 mm
LGP A-Blade
16.6 ft
5072 mm
LGP VPAT-Blade
13.7 ft
4160 mm
Dimensions – XL VPAT
Length of Basic Tractor(2)
16.08 ft
4894 mm
Ground Clearance
15 in
375 mm
Ground Pressure (ISO 16754)(3)
9.78 psi
67.4 kPa
Note
(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Note
(2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Note
(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Dimensions – XW VPAT
Width of Tractor Without Trunnions (standard track)
9.83 ft
2996 mm
Machine Height to Product Link Antenna(1)
10.83 ft
3303 mm
Length of Track on Ground
10.67 ft
3245 mm
Length of Basic Tractor(2)
16.42 ft
5002 mm
Ground Clearance
16 in
406 mm
Ground Pressure (ISO 16754)(3)
6.92 psi
47.7 kPa
Note
(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Note
(2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Note
(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Dimensions – LGP VPAT
Width of Tractor Without Trunnions (standard track)
10.33 ft
3143 mm
Machine Height to Product Link Antenna(1)
10.83 ft
3303 mm
Length of Track on Ground
10.67 ft
3245 mm
Length of Basic Tractor(2)
16.42 ft
5002 mm
Ground Clearance
16 in
406 mm
Ground Pressure (ISO 16754)(3)
6.28 psi
43.3 kPa
Note
(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Note
(2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Note
(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Engine
Build Number
19
Operating Weight
Note
Operating weight includes blade, lubricants, coolant, full fuel tank, standard track, ROPS/FOPS cab, drawbar and operator.
Standard/Optional

Your time is valuable, and your business, much appreciated. Thanks for visiting our website. You can count on us for realistic answers to your equipment needs, state-of-the-art technology, experienced application specialists, flexible acquisition options and customized financing. We look forward to answering your questions.

Connect With Us!