416F2 Backhoe Loader

Product Description

Experience the new Cat 416F2 Backhoe Loader with features including spacious operator station, optional pilot controls, superior durability and outstanding performance. Safely operate on the job site with quieter hydraulics, increased visibility, and the ability to have four wheel braking engaged without wearing on tires or drive train.

Specifications
Us
Metric
Engine
Net Power – SAE J1349
87 hp
65 kW
Engine Model
Cat® C4.4 ACERT™
Gross Power – SAE J1995
95 hp
71 kW
Gross Power – ISO 14396
94 hp
70 kW
Rated Net Power @ 2,200 rpm – SAE J1349
87 hp
65 kW
Rated Net Power @ 2,200 rpm – ISO 9249
88 hp
66 kW
Rated Net Power @ 2,200 rpm – EEC 80/1269
88 hp
66 kW
Net Peak Power @ 1,800 rpm – SAE J1349
106 hp
79 kW
Net Peak Power @ 1,800 rpm – ISO 9249
107 hp
80 kW
Net Peak Power @ 1,800 rpm – EEC 80/1269
107 hp
80 kW
Bore
4.13 in
105 mm
Stroke
5 in
127 mm
Displacement
268 in3
4.4 L
Net Torque Rise @ 1,400 rpm – SAE J1349
56%
Net Peak Torque @ 1,400 rpm
323 lbf-ft
438 N·m
Note
Engine meets U.S. EPA Tier 4 Final emission standards.
Backhoe
Dig Depth – Standard
14.3 ft
4348 mm
Weights
Operating Weight – Minimum
15904 lb
7214 kg
Operating Weight – Maximum
24251 lb
11000 kg
Operating Weight – Maximum (ROPS Capacity)
24251 lb
11000 kg
Cab, ROPS/FOPS
359 lb
163 kg
Air Conditioning
101 lb
46 kg
Four Wheel Drive
392 lb
178 kg
MP Bucket (0.96 m3/1.25 yd3) (no forks or teeth)
1642 lb
745 kg
Extendible Stick
659 lb
299 kg
Counterweights (Option 1)
255 lb
115 kg
Hydraulic System
Type
Closed Center
Pump Type
Variable Flow, Axial Piston
Pump Capacity @ 2,200 rpm
35 gal/min
132 L/min
System Pressure – Backhoe
3336 psi
23000 kPa
System Pressure – Loader
3336 psi
23000 kPa
Transmission
Power Shuttle Transmission – Standard: Forward – 1st
3.4 mph
5.4 km/h
Power Shuttle Transmission – Standard: Forward – 2nd
5.5 mph
8.9 km/h
Power Shuttle Transmission – Standard: Forward – 3rd
12 mph
20 km/h
Power Shuttle Transmission – Standard: Forward – 4th
23 mph
36 km/h
Power Shuttle Transmission – Standard: Reverse – 1st
3.4 mph
5.4 km/h
Power Shuttle Transmission – Standard: Reverse – 2nd
5.5 mph
8.9 km/h
Power Shuttle Transmission – Standard: Reverse – 3rd
12 mph
20 km/h
Power Shuttle Transmission – Standard: Reverse – 4th
23 mph
36 km/h
Axle Ratings
Front Axle, 2WD – Static
50582 lb
22964 kg
Front Axle, 2WD – Dynamic
20233 lb
9186 kg
Front Axle, 4WD – Static
50582 lb
22964 kg
Front Axle, 4WD – Dynamic
20233 lb
9186 kg
Rear Axle – Static
50582 lb
22964 kg
Rear Axle – Dynamic
20233 lb
9186 kg
Service Refill Capacities
Cooling System with Air Conditioning
5.8 gal
22 L
Fuel Tank
42 gal
160 L
Diesel Exhaust Fluid (DEF)*
5 gal
19 L
Engine Oil with Filter
2.3 gal
8.8 L
Transmission – Power Shuttle: 2WD
4 gal
15 L
Transmission – Power Shuttle: 4WD
4 gal
15 L
Rear Axle
4.4 gal
16.5 L
Rear Axle – Planetaries
0.4 gal
1.7 L
Front Axle (4WD)
2.9 gal
11 L
Front Axle (4WD) – Planetaries
0.2 gal
0.7 L
Hydraulic System
23.8 gal
90 L
Weights
Counterweights (Option 2)
530 lb
240 kg
Counterweights (Option 3)
1015 lb
460 kg
Steering
Type
Front Wheel
Power Steering
Hydrostatic
Bore
2.6 in
65 mm
Stroke
4.7 in
120 mm
Rod Diameter
1.4 in
36 mm
Axle Oscillation
11°
Turning Circle – 2WD/4WD (inner wheel not braked): Outside, Front Wheels
26.8 ft
8.18 m
Turning Circle – 2WD/4WD (inner wheel not braked): Outside, Widest Loading Bucket
36.0 ft
10.97 m
Service Refill Capacities
Hydraulic Tank
10.6 gal
40 L
Note
Requires ultra-low sulfur fuel less than or equal to 15 ppm fuel sulfur.
Tires
Choice 1
Front: 11L-16 (12 ply) F-3; Rear: 19.5L-24 (12 ply) R4 ATU
Choice 2
Front: 12.5/80-18 (12 ply) 1-3; Rear: 19.5L-24 (12 ply) ATU
Choice 3
Front: 12.5/80-18 NHS (12 ply) 1-3; Rear: 21L-24 (16 ply) R4 ATU
Choice 4
Front: 340/80R18; Rear: 19.5L-24 (12 ply) R4 ATU
Engine
Rated Net Power – SAE J1349
87 hp
65 kW
Rated Net Power – ISO 9249
88 hp
66 kW
Backhoe
Dig Depth – E-Stick Extended
17.9 ft
5441 mm
Service Refill Capacities
Note
* Must meet the requirements outlined in ISO 22241.
Standards
Brakes
SAE J/ISO 3450; ISO 3450 1996
Cab – ROPS
SAE J1040 MAY94; ISO 3741 1994
Cab – FOPS
SAE J/ISO 3449 APR98 LEVEL II and ISO 3449: 1992 LEVEL II
Cab – Sound
ANSI/SAE J1166 OCT98 is 79 dB(A)
Exterior Sound
SAE J188 JUN86 is 76 dB(A)
Engine Features
Feature
Regeneration is passive and does not require any input from the operator or disrupt work.
Feature
Three-ring pistons made of lightweight, silicon/aluminum alloy for strength and maximum thermal conductivity.
Feature
Forged chrome/molybdenum-steel crankshaft with salt bath nitrocarburized pins and journals.
Feature
Front and rear crankshaft oil seals are “lip” type Viton and PTFE designs featuring an integral dust lip.
Feature
For durability, inlet valves are nitrided, martensitic chrome silicon steel.
Feature
For durability, exhaust valves are nitrided, austenitic chrome manganese-nickel steel.
Feature
Cylinder block is high strength, cast iron alloy of deep skirt, monobloc design for increased strength and long life.
Feature
Cylinder head is high strength, cast iron alloy construction with extra duty wall and deck thickness.
Feature
Cylinder head's intake and exhaust ports are precision cast to promote optimum gas flow.
Feature
Direct injection fuel system provides accurate fuel delivery and efficiency.
Feature
Dry-type axial seal air cleaner with integral precleaner, automatic dust ejection system, and filter condition indicator.
Feature
Direct electric, 12-volt starting and charging system with 880 CCA Group 31 maintenance free battery.
Feature
Standard glow plug starting aid system for efficient cold weather starting.
Feature
High contact ratio/gear train, peripheral fixed isolation top cover and open deck block design reduce bare engine noise.
Feature
Higher low end torque for better engine/machine performance.
Feature
Engine is equipped with electric fuel priming pump.
Brakes
Feature
Brakes meet the following standards: SAE J1473 and ISO 3450 requirements.
Feature
Self-adjusting, completely enclosed and sealed.
Feature
Foot operated brake pedals can be interlocked for roading.
Feature
Parking/secondary brakes are independent of the service brake system.
Feature
Parking brake is mechanically applied through an adjustable hand lever located on the right console.
Standard/Optional

Standard Equipment

Air cleaner
Alarm, back-up
Alternator, 150 amp
Audible system fault alarm
Backhoe controls, mechanical two lever
Battery, maintenance-free, 880 CCA
Battery disconnect switch
Battery remote jumpstart
Boom transport lock
Brace, lift cylinder
Brake, secondary parking
Brakes, hydraulically boosted, oil disc, dual pedals, interlocking
Bucket level indicator
Canopy, ROPS/FOPS
Coat restraint
Coolant/antifreeze, extended life
Counterweight, bumper
Dome light (cab only)
Diagnostic port for engine
Differential lock, loader joystick
Drink holders, two
Engine, Cat C4.4 ACERT (Direct Injection Turbocharged), meets U.S. EPA Tier 4 Final emission standards, selective catalyst reduction, diesel oxidation catalyst (DOC)
Engine enclosure, sound suppression removal panels
Face seals, O-ring
Fan, suction and guard
Fast reversing shuttle, all gears
Fenders, rear
Filters, spin-on: fuel, engine oil, transmission oil, water separator
Filters, bowl and cartridge: hydraulic fluid
Flashing hazards/signal lights
Floor mat
Fully hinged front grill for cooling package cleaning access
Gauge cluster: coolant temperature, fuel level, torque converter temperature, DEF level
Ground level fuel fill and DEF fill
High ambient cooling package
Hood lock, inside cab
Hydraulic hose, XT™
Hydraulic oil cooler
Hydraulic oil level sight gauge
Hydraulic valve, hydrostatic steering
Hydraulic valves, loader 2 function
Hydraulic valves, backhoe 4 function
Hydraulics, load sensing with variable displacement piston pump
Indicator lights: Eco mode active, water in fuel, remote dial throttle active, engine warning, warning lamp, emissions module malfunction, AESC active, low battery/charging system warning, high hydraulic oil temperature; LCD warnings: engine oil pressure, machine locked (if equipped), service due, air filter blocked, high coolant temperature, auto idle shutdown, high torque converter temperature, hydraulic filter bypass
Instrument panel lights
Key start/stop system
LCD screen: engine speed, hour meter, gear/direction, battery voltage, hydraulic oil temperature, torque converter temperature, coolant temperature, trip totals (fuel and hours), lifetime totals (fuel and hours), operator settings (units, brightness, programmable hoe auxiliary flow), service mode diagnostics, oil life reset, DPF force regeneration, maintenance intervals, ECM/system info
Lights, working (2 front, 2 rear)
Loader, self-leveling, return-to-dig and transmission disconnect switch
Loader, single tilt
Mechanical two lever controls
Mirror, rearview
Open circuit breather
Power receptacle, 12 volt, 2 internal, 1 external
Power steering, hydrostatic
Seat belt, retractable, 51 mm (2 in)
Socket, two roof
Stabilizer shoes, street
Steering knob
Seat, air suspension, fabric or vinyl cover, with armrest
Starting system, glow plugs
Steering, hydrostatic
Storage compartment, lockable
Storage tray
Stop and tail lights
Swing transport lock
Tilt steering column
Tires
Toolbox, external, lockable
Torque converter
Throttle, hand and foot, electronic
Transmission, four speed, syncromesh
Transmission neutralizer switch
Transport tie-downs
Two Wheel Drive
Vandalism locks
Warning horn, electric

Optional Equipment

Backhoe controls, pilot joysticks
Battery, additional, 880 CCA
Cab, standard
Cold weather fuel (–30° C/–22° F)
Cold weather package, including additional battery, engine block heater, radiator antifreeze (–50° C/–58° F), cold weather fuel (–30° C/–22° F) and mounting for an ether bottle
Counterweights, 115 kg (255 lb), 240 kg (530 lb) or 460 kg (1,015 lb)
Fenders, front with integral steps
Four Wheel Drive
Guard, boom protection plate
Guard, stabilizer, rock
Hydraulic valves, loader (3rd valve for GP, MP or Quick Coupler)
Hydraulic valves, backhoe (5th and 6th function)
Hydraulic lines, combined function auxiliary
Product Link, satellite, PL631E
Product Link, cellular, PL641I
Quick Coupler, hydraulic, dual lock
Quick Coupler, manual, dual lock
Quick Coupler, pin lock
Radio and CD player
Radio and CD player, Bluetooth
Ride Control
Rotating beacon, magnetic mount
Seat belt, 75 mm (3 in)
Security system keypad
Stabilizer pads, grouser type
Stabilizer pads, reversible
Stick, extendible
Storage box
Vandalism protection, gauge cover
Work Tool Attachments such as buckets, forks, material handling arms, augers, hammers, brooms, cold planers and vibratory plate compactors. See your Cat dealer for more information.

Your time is valuable, and your business, much appreciated. Thanks for visiting our website. You can count on us for realistic answers to your equipment needs, state-of-the-art technology, experienced application specialists, flexible acquisition options and customized financing. We look forward to answering your questions.

Connect With Us!