740 EJ Articulated Truck

360 View

Product Description

The Cat 740 EJ with a 23 m3 (30.1 yd3) 38 tonnes (42 tons) capacity brings a new level of operator comfort and features to the market in addition to the durability, high productivity and lower operating costs Cat Articulated Trucks are known for.
The all-new operator cabin is a leap into the next generation for Articulated Trucks, providing our operators the best place to help build the future.

Specifications
Us
Metric
Engine
Engine Model
Cat® C18 ACERT™
Gross Power – SAE J1995
511 hp
381 kW
Net Power – SAE J1349
496 hp
370 kW
Bore
5.7 in
145 mm
Stroke
7.2 in
183 mm
Displacement
1106 in3
18.1 L
Engine Model – U.S. EPA Tier 4 Final, EU Stage IV, Japan 2014, Korea Tier 4 Final
Cat C18 ACERT
Net Power – ISO 14396
504 hp
376 kW
Weights
Rated Payload
42 tons
38 tonnes
Body Capacities
Heaped SAE 2:1
30.1 yd3
23 m3
Struck
23.5 yd3
18 m3
Transmission
Forward 1
3.8 mph
6.1 km/h
Forward 2
5 mph
8.1 km/h
Forward 3
7 mph
11.2 km/h
Forward 4
8.8 mph
14.1 km/h
Forward 5
11.6 mph
18.7 km/h
Forward 6
14.2 mph
22.9 km/h
Forward 7
19.6 mph
31.5 km/h
Reverse 1
4 mph
6.4 km/h
Reverse 2
9.1 mph
14.6 km/h
Operating Weights
Front Axle – Empty
44849 lb
20343 kg
Center Axle – Empty
17095 lb
7754 kg
Rear Axle – Empty
16515 lb
7491 kg
Total – Empty
78623 lb
35663 kg
Front Axle – Rated Load
3534 lb
1603 kg
Center Axle – Rated Load
40120 lb
18198 kg
Rear Axle – Rated Load
40120 lb
18198 kg
Total – Rated Load
83776 lb
38000 kg
Front Axle – Loaded
48548 lb
22021 kg
Center Axle – Loaded
57214 lb
25952 kg
Rear Axle – Loaded
56637 lb
25690 kg
Total – Loaded
162399 lb
73663 kg
Body Plate
Type
High Strength Brinell HB450 Wear Resistant Steel
Service Refill Capacities
Fuel Tank
145.3 gal
550 L
DEF Tank
5.3 gal
25 L
Cooling System
23.7 gal
90 L
Brake Cooling Tank
17.7 gal
67 L
Steering/Hoist Hydraulic System
36.9 gal
140 L
Engine Crankcase
13.7 gal
52 L
Transmission/OTG
19.8 gal
75 L
Sound Levels
Interior Cab
72 dB(A)
72 dB(A)
Standards
Brakes
ISO 3450 – 2011
Cab/FOPS
ISO 3449 Level II – 2005
Cab/ROPS
ISO 3471 – 2008
Steering
ISO 5010 – 2007
Steering
Lock to Lock
4.8 seconds @ 60 rpm
Turning Circle
Note
Dimensions are for machines equipped with 29.5R25 tires.
Turning Dimensions: Steer Angle – Left/Right
45 deg
Turning Dimensions: SAE Turning Radius
339 in
8624 mm
Turning Dimensions: Clearance Radius
356 in
9045 mm
Turning Dimensions: Inside Radius
173 in
4413 mm
Turning Dimensions: Aisle Width
233 in
5925 mm
Engine
No Engine De-rating Required Below
10000 ft
3050 m
Peak Engine Torque Gross (SAE J1995)
1931 lbf-ft
2618 N·m
Peak Engine Torque Net (SAE J1349)
1887 lbf-ft
2558 N·m
Peak Engine Torque Speed
1200 rpm
1200 rpm
Transmission
Forward 8
23.5 mph
37.9 km/h
Forward 9
34 mph
54.8 km/h
Service Refill Capacities
Final Drives (each)
1.3 gal
5 L
Axles (each)
15.8 gal
60 L
Engine
Note
The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard.
Note
The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
Note
Net power when the fan is at maximum speed is 348 kW (467 hp) per the SAE reference conditions.
Emissions
The 740 EJ meets Tier 4 Final/Stage IV emission standards.
Note
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.
Sound Levels
Note
The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed.
Note
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
Body Plate
Front
0.28 in
7 mm
Chute
0.55 in
14 mm
Side
0.43 in
11 mm
Base
0.55 in
14 mm
Optimal Loader/Truck Pass Matching
Hydraulic Excavator: 390 – Passes
4
Hydraulic Excavator: 374 – Passes
5
Wheel Loader: 982 – Passes
4
Wheel Loader: 980 – Passes
4-5
Wheel Loader: 972 – Passes
4-5
Note
An optimum system match gives you a major productivity advantage. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved.
Blade Eject/Retract
Eject (manual)
17 seconds
17 seconds
Eject (automatic)
16 seconds
16 seconds
Retract (manual)
21 seconds
21 seconds
Retract (automatic)
21 seconds
21 seconds
Standard/Optional

Standard Equipment

OPERATOR ENVIRONMENT
CAT CONNECT TECHNOLOGIES
ELECTRICAL AND LIGHTING
POWER TRAIN
SAFETY
GUARDS
OTHER STANDARD EQUIPMENT

Optional Equipment

OPTIONAL EQUIPMENT

Your time is valuable, and your business, much appreciated. Thanks for visiting our website. You can count on us for realistic answers to your equipment needs, state-of-the-art technology, experienced application specialists, flexible acquisition options and customized financing. We look forward to answering your questions.

Connect With Us!