| Features |
| |
|
GENERATOR SET |
| ● Complete system designed and built at ISO 9001 certified facilities |
| ● Factory tested to design specifications at full load conditions |
| |
| ENGINE |
| ● Governor, electronic. |
| ● Electrical system, 12 VDC |
| ● Cartridge type filters |
| ● Battery rack and cables |
| ● Coolant and lube drains piped to edge of base |
| |
| GENERATOR |
| ● Insulation system, class H |
| ● Drip proof generator air intake (NEMA 2, IP23) |
| ● Electrical design in accordance with BS5000 Part 99, EN61000-6, IEC60034-1, NEMA MG-1.33 |
| |
| CONTROL SYSTEM |
| ● EMCP 3.1 digital control panel |
| ● Vibration isolated NEMA 1 enclosure with lockable hinged door |
| ● DC and AC wiring harnesses |
| |
| MOUNTING ARRANGEMENT |
| ● Heavy-duty fabricated steel base with lifting points |
| ● Anti-vibration pads to ensure vibration isolation |
| ● Complete OSHA guarding |
| ● Stub-up pipe ready for connection to silencer pipework |
| ● Flexible fuel lines to base with NPT connections |
| |
| COOLING SYSTEM |
| ● Radiator and cooling fan complete with protective guards |
| ● Standard ambient temperatures up to 50° C (122° F) |
| |
| CIRCUIT BREAKER |
| ● UL/CSA listed |
| ● 3-pole with solid neutral |
| ● NEMA 1 steel enclosure, vibration isolated |
| ● Electrical stub-up area directly below circuit breaker |
| |
| AUTOMATIC VOLTAGE REGULATOR |
| ● Voltage within ± 0.5% 3-phase and ± 1.0% single phase at steady state from no load to full load |
| ● Provides fast recovery from transient load changes |
| |
| EQUIPMENT FINISH |
| ● All electroplated hardware |
| ● Anticorrosive paint protection |
| ● High gloss polyurethane paint for durability and scuff resistance |
| |
| QUALITY STANDARDS |
| ● BS4999, BS5000, BS5514, EN61000-6, IEC60034, NEMA MG-1.33, NFPA 110 (with optional equipment) |
| |
| DOCUMENTATION |
| ● Operation and maintenance manuals provided |
| ● Wiring diagrams included |
| |
| WARRANTY |
| ● All equipment carries full manufacturer’s warranty. |