966M XE Wheel Loader

360 View Video

Product Description

The new 966M XE Wheel Loader, with the 2017 product update, applies proven technologies systematically and strategically to meet your high expectations for reliability, productivity, fuel efficiency, and long service life. The XE technology improves fuel efficiency by up to 25% over the M Series standard configuration and up to 35% over the K Series standard configuration.** Meets U.S. EPA Tier 4 Final and EU Stage IV emission standards. **Actual results may vary based on factors such as, but not limited to, machine configuration, operator technique, machine application, climate, etc.

Specifications
Us
Metric
Engine
Engine Model
Cat C9.3 ACERT
Net Power - ISO 9249
298 hp
222 kW
Maximum Net Power @ 1,600 rpm – SAE J1349
298 hp
222 kW
Maximum Net Power @ 1,600 rpm – SAE J1349 (metric)
302 hp
222 kW
Maximum Net Power @ 1,600 rpm – ISO 9249
298 hp
222 kW
Maximum Net Power @ 1,600 rpm – ISO 9249 (metric)
302 hp
222 kW
Peak Gross Torque (1,200 rpm) – SAE J1995
1275 lbf-ft
1728 N·m
Peak Gross Torque (1,200 rpm) – ISO 14396
1260 lbf-ft
1708 N·m
Maximum Net Torque (1,200 rpm)
1193 lbf-ft
1618 N·m
Displacement
568 in³
9.3 L
Note
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes.
Weights
Operating Weight
51176 lb
23220 kg
Note
Weight based on a machine configuration with Michelin 26.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link™, manual diff lock/open axles (front/rear), power train guard, secondary steering, sound suppression and a 4.2 m3 (5.5 yd3) general purpose bucket with BOCE.
Bucket Capacities
Bucket Capacities
3.20-7.40 m3 (4.19-9.68 yd3)
Buckets
Bucket Capacities
3.20-7.40 m3 (4.19-9.68 yd3)
Operating Specifications
Static Tipping Load – Full 37° Turn – with Tire Deflection
32329 lb
14668 kg
Static Tipping Load – Full 37° Turn – No Tire Deflection
34873 lb
15822 kg
Breakout Force
38984 lbf
173 kN
Note
For a machine configuration as defined under “Weight.”
Note
Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Transmission – Virtual Gears
Forward 1
4.1 mph
6.7 km/h
Forward 2
7.7 mph
12.6 km/h
Forward 3
13.5 mph
22.1 km/h
Forward 4
24.5 mph
39.5 km/h
Reverse 1
4.1 mph
6.7 km/h
Reverse 2
7.7 mph
12.6 km/h
Reverse 3
17.1 mph
28.0 km/h
Note
Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 826 mm (32.5 in) roll radius.
Hydraulic System
Implement Pump Type
Variable Displacement Piston
Implement System: Maximum Pump Output (1,600 rpm)
102 gal/min
385 L/min
Implement System: Maximum Operating Pressure
4496 psi
31000 kPa
Hydraulic Cycle Time – Total
10.1 Seconds
10.1 Seconds
Service Refill Capacities
Fuel Tank
79.8 gal
302 L
DEF Tank
4.4 gal
16.8 L
Cooling System
19 gal
71.6 L
Crankcase
6.5 gal
24.5 L
Transmission
16.6 gal
63 L
Differentials and Final Drives – Front
15.1 gal
57 L
Differentials and Final Drives – Rear
15.1 gal
57 L
Hydraulic Tank
33 gal
125 L
Sound
With Cooling Fan Speed at Maximum Value: Operator Sound Pressure Level (ISO 6396:2008)
67 dB(A)
67 dB(A)
With Cooling Fan Speed at Maximum Value: Exterior Sound Power Level (ISO 6395:2008)
107 dB(A)
107 dB(A)
With Cooling Fan Speed at Maximum Value: Exterior Sound Pressure Level (SAE J88:2013)
76 dB(A)*
Note
*Distance of 15 m (49.2 ft), moving forward in second gear ratio.
With Cooling Fan Speed at 70% of Maximum Value: Operator Sound Pressure Level (ISO 6396:2008)**
67 dB(A)
67 dB(A)
With Cooling Fan Speed at 70% of Maximum Value: Exterior Sound Power Level (ISO 6395:2008)**
105 LWA***
Note
**For machines in European Union countries and in countries that adopt the “EU Directives.”
Note
***European Union Directive “2000/14/EC” as amended by “2005/88/EC.”
Dimensions – Standard Lift
Height to Top of Hood
9.25 ft
2818 mm
Height to Top of Exhaust Pipe
11.58 ft
3522 mm
Height to Top of ROPS
11.75 ft
3587 mm
Ground Clearance
1.42 ft
434 mm
Center Line of Rear Axle to Edge of Counterweight
7.17 ft
2180 mm
Center Line of Rear Axle to Hitch
5.83 ft
1775 mm
Wheelbase
11.67 ft
3550 mm
Overall Length (without bucket)
23.92 ft
7289 mm
Hinge Pin Height at Maximum Lift
13.92 ft
4235 mm
Hinge Pin Height at Carry
2.08 ft
630 mm
Lift Arm Clearance at Maximum Lift
11.92 ft
3643 mm
Rack Back at Maximum Lift
62 degrees
Rack Back at Carry Height
50 degrees
Rack Back at Ground
42 degrees
Maximum Width over Tires
9.83 ft
3009 mm
Tread Width
7.33 ft
2230 mm
Note
All dimensions are approximate and based on L3 XHA2 tires.
Dimensions – High Lift
Height to Top of Hood
9.25 ft
2818 mm
Height to Top of Exhaust Pipe
11.58 ft
3522 mm
Height to Top of ROPS
11.75 ft
3587 mm
Ground Clearance
1.42 ft
434 mm
Center Line of Rear Axle to Edge of Counterweight
8.17 ft
2500 mm
Center Line of Rear Axle to Hitch
5.83 ft
1775 mm
Wheelbase
11.67 ft
3550 mm
Overall Length (without bucket)
26.58 ft
8109 mm
Hinge Pin Height at Maximum Lift
15.75 ft
4793 mm
Hinge Pin Height at Carry
2.58 ft
778 mm
Lift Arm Clearance at Maximum Lift
13.58 ft
4140 mm
Rack Back at Maximum Lift
71 degrees
Rack Back at Carry Height
49 degrees
Rack Back at Ground
39 degrees
Maximum Width over Tires
9.83 ft
3009 mm
Tread Width
7.33 ft
2230 mm
Note
All dimensions are approximate and based on L3 XHA2 tires.
Standard/Optional

Your time is valuable, and your business, much appreciated. Thanks for visiting our website. You can count on us for realistic answers to your equipment needs, state-of-the-art technology, experienced application specialists, flexible acquisition options and customized financing. We look forward to answering your questions.

Connect With Us!