930M Wheel Loader

360 View Video

Product Description

The Cat 930M Small Wheel Loader sets the standard for productivity, fuel efficiency and operator comfort. The improved optimized Z-bar loader linkage delivers the quick loading performance of a traditional Z-bar with the parallelism and load handling capability of a tool carrier. A high torque, low speed C7.1 ACERT engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. Meets Tier 4 Final/Stage IV emission standards with an environmentally friendly, Clean Emission Module designed to manage itself so you can concentrate on your work. Experience the new industry benchmark.

Specifications
Us
Metric
Engine
Engine Model
Cat® C7.1 ACERT™
Maximum Rated Gross Power - ISO 14396
164 mm H2O
122 kg/mm
Maximum Rated Gross Power - ISO 14396 (DIN)
166 mm H2O
122 kg/mm
Maximum Rated Gross Power - ISO 14396 (DIN) (Performance Power Mode: Range 1-4)
166 mm H2O
122 kg/mm
Maximum Rated Gross Power - ISO 14396 (Performance Power Mode: Range 1-4)
164 mm H2O
122 kg/mm
Maximum Rated Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4)
1800 r/min
1800 r/min
Rated Net Power
157 mm H2O
117 kg/mm
Rated Net Power - 1,800 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
160 mm H2O
119 kg/mm
Rated Net Power - 1,800 rpm - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
157 mm H2O
117 kg/mm
Buckets
Bucket Capacities
2.1-5.0 m3 (2.7-6.5 yd3)
Weights
Operating Weight
30879 lb
14007 null
Engine
Maximum Gross Power
164 mm H2O
122 kg/mm
Bore
4 in
105 mm
Stroke
5 in
135 mm
Displacement
427 in³
7.01 l
Cab
ROPS
ISO 3471: 2008
FOPS
ISO 3449: 2005 LEVEL II
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential – 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.
Cab
Note (1)
Declared sound levels per ISO 6396:2008* while in Performance Power Mode: – Standard cab: 68 ±3 dB(A) and Deluxe cab
Note (2)
* Measurements were conducted with cab doors and windows closed and at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds.
Engine
Emissions
Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4)
592 lb/ft
804 N·m
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*)
592 lb/ft
804 N·m
Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Performance Power Mode: Range 1-4)
572 lb/ft
776 N·m
Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Standard Power Mode: Range 1-3*)
572 lb/ft
776 N·m
Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4)
566 lb/ft
768 N·m
Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*)
566 lb/ft
768 N·m
Maximum Rated Gross Power - ISO 14396 (DIN) (Standard Power Mode: Range 1-3*)
162 mm H2O
119 kg/mm
Maximum Rated Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*)
160 mm H2O
119 kg/mm
Maximum Rated Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*)
1600 r/min
1600 r/min
Note (1)
* Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
Note (2)
Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
Note (3)
No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Note (4)
Spark arrestor performance as standard – Meets performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test).
Rated Net Power - 1,600 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
156 mm H2O
116 kg/mm
Rated Net Power - 1,600 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
158 mm H2O
116 kg/mm
Rated Net Power - 1,600 rpm - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
154 mm H2O
115 kg/mm
Rated Net Power - 1,800 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Performance Power Mode: Range 1-4)
162 mm H2O
119 kg/mm
Loader Hydraulic System
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height)
1.5/1.7 seconds
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level)
2.7/2.7 seconds
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift)
5.1/5.7 seconds
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time
9.3/10.1 seconds
Lift Cylinder, Double Acting - Bore Diameter
4.7 in
120 mm
Lift Cylinder, Double Acting - Rod Diameter
2.6 in
65 mm
Lift Cylinder, Double Acting - Stroke
28.7 in
728 mm
Maximum Flow - Implement Pump
50 gal/min
190 l/min
Maximum Flow - Implement Pump - 3rd Function*
50 gal/min
190 l/min
Maximum Flow - Implement Pump - 4th Function Maximum Flow*
42 gal/min
160 l/min
Maximum Working Pressure - Implement Pump
3626 psi
25000 kPa
Note (1)
* 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped.
Note (2)
Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
Note (3)
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Relief Pressure - Tilt Cylinder
4061 psi
28000 kPa
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure
3626 psi
25000 kPa
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure
4061 psi
28000 kPa
Tilt Cylinder, Double Acting - Bore Diameter
5.9 in
150 mm
Tilt Cylinder, Double Acting - Rod Diameter
3.5 in
90 mm
Tilt Cylinder, Double Acting - Stroke
21.9 in
555 mm
Operating Specifications
Full Turn Tip Load
18670 lb
8469 null
Power Train
Brakes - Parking
Spring applied hydraulically released
Brakes - Service
Inboard wet disc
Front Axle
Fixed
Front Axle - Traction Aid - Standard
Locking differential
Note (1)
Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
Note (2)
Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 930M.
Rear Axle
Oscillating
Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65
± 10.5 degrees
Rear Axle - Oscillation Angle by Tire Size - Solid Tires, 750/65, 620/65, Skidder
± 7 degrees
Rear Axle - Traction Aid (Optional)
Limited slip differential
Service Refill Capacities
Cooling System
7.9 gal (US)
30 l
Diesel Exhaust Fluid (DEF) Tank
5 gal (US)
19 l
Engine Crankcase
5.3 gal (US)
20 l
Front Axles
6.9 gal (US)
26 l
Fuel Tank
51.5 gal (US)
195 l
Hydraulic System - Including Tank
43.6 gal (US)
165 l
Hydraulic Tank
23.8 gal (US)
90 l
Rear Axles
6.6 gal (US)
25 l
Transmission - Gear Box
2.2 gal (US)
8.5 l
Steering
Maximum Flow - Steering Pump
34 gal/min
130 l/min
Maximum Steering Torque - 0° (Straight Machine)
37155 lb/ft
50375 N·m
Maximum Steering Torque - 40° (Full Turn)
27747 lb/ft
37620 N·m
Maximum Working Pressure - Steering Pump
3500 psi
24130 kPa
Note (1)
Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
Note (2)
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed
2.4 s
2.4 s
Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited
2.8 s
2.8 s
Steering Cylinder, Double Acting - Bore Diameter
2.8 in
70 mm
Steering Cylinder, Double Acting - Rod Diameter
1.6 in
40 mm
Steering Cylinder, Double Acting - Stroke
17.2 in
438 mm
Transmission
Forward and Reverse - Range 1*
1-13 km/h (0.6-8 mph)
Forward and Reverse - Range 2
8 mile/h
13 km/h
Forward and Reverse - Range 3
17 mile/h
27 km/h
Forward and Reverse - Range 4
25 mile/h
40 km/h
Note
* Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph).
Standard/Optional

Standard Equipment

POWER TRAIN
HYDRAULICS
ELECTRICAL
OPERATOR ENVIRONMENT
OTHER STANDARD EQUIPMENT

Optional Equipment

OPTIONAL EQUIPMENT

Your time is valuable, and your business, much appreciated. Thanks for visiting our website. You can count on us for realistic answers to your equipment needs, state-of-the-art technology, experienced application specialists, flexible acquisition options and customized financing. We look forward to answering your questions.

Connect With Us!