918M Compact Wheel Loader

360 View Video

Product Description

Introducing the all new Cat 918M Compact Wheel Loader. This new model to the compact loader family features the Optimized Z-bar Loader Linkgage to handle loads with precise control, all around visibility from the comfort of the heated, air suspension seat inside the cab, as well as the standard fuel savings Eco Mode. The intuitive controls and compact size of this machine make it quick and easy to operate in tight spaces. Indispensible to any jobsite, the 918M is a powerful fuel efficient machine giving you the best value in its size class.

Specifications
Us
Metric
Engine
Net Power
113 mm H2O
84 kg/mm
Engine Model
Cat C4.4 ACERT™
Maximum Gross Power - ISO 14396
115 mm H2O
86 kg/mm
Maximum Gross Power - ISO 14396 (DIN)
117 mm H2O
86 kg/mm
Maximum Gross Power - Maximum Engine Speed
2350 r/min
2350 r/min
Maximum Gross Power - SAE J1995
117 mm H2O
87 kg/mm
Rated Net Power - Rated Engine Speed
2200 r/min
2200 r/min
Rated Net Power - SAE J1349
112 mm H2O
83 kg/mm
Weights
Operating Weight
20917 lb
9491 null
Service Refill Capacities
Cooling System
5.7 gal (US)
21.5 l
Engine Crankcase
2.3 gal (US)
8.8 l
Fuel Tank
40.7 gal (US)
154 l
Hydraulic System - Including Tank
25.9 gal (US)
98 l
Operating Specifications
Rated Bucket Capacity
2.5 yd³
1.9 m³
Engine
Maximum Gross Power
115 mm H2O
86 kg/mm
Buckets
Bucket Capacities
1.3-1.9 m3 (1.7-2.5 yd3)
Engine
Bore
4.13 in
105 mm
Stroke
5 in
127 mm
Displacement
268 in³
4.4 l
Service Refill Capacities
Transmission
0.9 gal (US)
3.4 l
Cab
ROPS
SAE J1040 MAY94, ISO 3471-1994
FOPS
SAE J/ISO 3449 APR98, Level II, ISO 3449 1992 Level II
Axles
Front
Fixed; Locking differential (standard)
Rear
Oscillating ±11 degrees; Locking differential (standard)
Cab
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2)
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 77 dB(A).
Note (3)
The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 103 dB(A).
Note (4)
*The measurements were conducted with the cab doors and windows closed.
Engine
Emissions
Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
Maximum Gross Torque - ISO 14396
369 ft·lbf
500 N·m
Maximum Gross Torque - SAE J1995
372 ft·lbf
504 N·m
Maximum Net Torque - ISO 9249
365 ft·lbf
495 N·m
Maximum Net Torque - SAE J1349
361 ft·lbf
490 N·m
Note
Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Rated Net Power - ISO 9249
113 mm H2O
84 kg/mm
Rated Net Power - ISO 9249 (DIN)
114 mm H2O
84 kg/mm
Loader Hydraulic System
Hydraulic Cycle Time - Dump, at Maximum Reach
1.8 s
1.8 s
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level
2.7 s
2.7 s
Hydraulic Cycle Time - Rackback
2.2 s
2.2 s
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift
4.8 s
4.8 s
Hydraulic Cycle Time - Total Cycle Time
11.5 s
11.5 s
Maximum Flow - Implement Pump
43.6 gal/min
165 l/min
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High
40 gal/min
150 l/min
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard
25 gal/min
95 l/min
Maximum Flow - Implement Pump - 4rd Function, Maximum Flow
25 gal/min
95 l/min
Maximum Working Pressure - Implement Pump
4061 psi
28000 kPa
Note
All cycle times listed are with cylinder snubbing turned off.
Relief Pressure - Tilt Cylinder
4641 psi
32000 kPa
Relief Pressure - Tilt Cylinder - 3rd Function Relief Pressure
4641 psi
32000 kPa
Relief Pressure - Tilt Cylinder - 4th Function Relief Pressure
4641 psi
32000 kPa
Service Refill Capacities
Axles - Front
4.5 gal (US)
17 l
Axles - Rear
4.5 gal (US)
17 l
Diesel Exhaust Fluid (DEF) Tank
5 gal (US)
18.9 l
Hydraulic Tank
14.5 gal (US)
55 l
Note
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Steering
Maximum Flow - Steering Pump
21.7 gal/min
82 l/min
Maximum Working Pressure - Steering Pump
3190 psi
22000 kPa
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
3.4 turns
3.4 turns
Steering Articulation Angle - Each Direction
40 °
40 °
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed
2.3 s
2.3 s
Tires
Note (1)
Other tire choices are available. Contact your Cat dealer for details.
Note (2)
In certain applications, the loader's productive capabilities may exceed the tire's tonnes-km/h (ton-mph) capabilities.
Note (3)
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Other Choices Include
17.5-25 12PR L2; 17.5-R25 XHA * L3; 17.5-R25 * L2/L3 PC RM; 17.5-25 16PR L3, 3PC Rim; 17.5-25 GY L2/L3; 17.5-25 12PR L2, SNOW; Flexport™
Standard Size
17.5-25 12PR
Transmission
Forward and Reverse - High Range
25 mile/h
40 km/h
Forward and Reverse - Low Range, Speed Range 1*
6.3 mile/h
10 km/h
Forward and Reverse - Low Range, Speed Range 2
12.5 mile/h
20 km/h
Note
*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Standard/Optional

Standard Equipment

POWER TRAIN
LOADER END
REGIONAL STANDARDS (as required)
HYDRAULICS
ELECTRICAL
FLUIDS
CHASSIS
OPERATOR ENVIRONMENT

Optional Equipment

POWER TRAIN
LOADER END
HYDRAULICS
ELECTRICAL
FLUIDS
CHASSIS
OPERATOR ENVIRONMENT

Your time is valuable, and your business, much appreciated. Thanks for visiting our website. You can count on us for realistic answers to your equipment needs, state-of-the-art technology, experienced application specialists, flexible acquisition options and customized financing. We look forward to answering your questions.

Connect With Us!