272D2 XHP Skid Steer Loader

Product Description

The Cat® 272D2 XHP Skid Steer Loader, with its powerful engine, high output hydraulic system, high lift forces and vertical lift design, provides the maximum performance for work tool productivity, digging, truck loading and material handling.

Specifications
Us
Metric
Engine
Engine Model
Cat C3.8 DIT (turbo)
Net Flywheel Power
106 mm H2O
79 kg/mm
Gross Power - SAE J1995
110 mm H2O
82 kg/mm
Net Power - SAE 1349
106 mm H2O
79 kg/mm
Displacement
232 in³
3.8 l
Stroke
4.7 in
120 mm
Bore
3.9 in
100 mm
Net Power - ISO 9249
107 mm H2O
80 kg/mm
Peak Torque - 1,500 rpm - SAE J1995
276 ft·lbf
374 N·m
Weights
Operating Weight
9255 lb
4198 null
Operating Specifications
Rated Operating Capacity
3650 lb
1656 null
Tipping Load
7300 lb
3311 null
Breakout Force - Tilt Cylinder
7362 lb
3339 null
Breakout Force - Lift Cylinder
6085 lb
2760 null
Dimensions
Wheel Base
54.6 in
1386 mm
Height - Top of Cab
84 in
2133 mm
Vehicle Width over Tires
76 in
1930 mm
Ground Clearance
10.4 in
263 mm
Departure Angle
28°
Maximum Dump Angle
51°
Bucket Pin Height - Carry Position
9.3 in
235 mm
Bucket Pin Height - Maximum Lift
128.6 in
3265 mm
Bucket Pin Reach - Maximum Lift
13.5 in
344 mm
Bumper Overhang - Behind Rear Axle
46.2 in
1175 mm
Clearance at Maximum Lift and Dump
97.4 in
2474 mm
Length - With Bucket on Ground
155 in
3937 mm
Length - Without Bucket
127 in
3226 mm
Maximum Overall Height
161.5 in
4103 mm
Maximum Reach - With Arms Parallel to Ground
49.1 in
1246 mm
Rack Back Angle - Maximum Height
84°
Reach - Maximum Lift/Dump
29 in
736 mm
Turning Radius from Center - Bucket (racked)
90.6 in
2301 mm
Turning Radius from Center - Coupler
57.7 in
1466 mm
Turning Radius from Center - Machine Rear
74.7 in
1899 mm
Hydraulic System
Hydraulic Flow - XHP - Hydraulic Power (Calculated)
94 mm H2O
70 kg/mm
Hydraulic Flow - XHP - Maximum Loader Hydraulic Flow*
40 gal/min
150 l/min
Hydraulic Flow - XHP - Maximum Loader Hydraulic Pressure
4061 psi
28000 kPa
Note
*When equipped with Cat 400 Series work tools.
Standard Flow Mode - Hydraulic Power - Calculated
44 mm H2O
33 kg/mm
Standard Flow Mode - Loader Hydraulic Flow
23 gal/min
86 l/min
Standard Flow Mode - Loader Hydraulic Pressure
3335 psi
23000 kPa
Cab
ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level I
FOPS Level II
ISO 3449:2005 Level II
Power Train
Travel Speed - Forward or Reverse - One Speed
7.2 mile/h
11.6 km/h
Travel Speed - Forward or Reverse - Two Speed
10.3 mile/h
16.6 km/h
Service Refill Capacities
Cooling System
4.1 gal (US)
16 l
Engine Crankcase
3.5 gal (US)
13 l
Fuel Tank
32.2 gal (US)
122 l
Hydraulic System
14.5 gal (US)
55 l
Hydraulic Tank
10.3 gal (US)
39 l
Chain Box - Each Side
2.7 gal (US)
10.2 l
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
Dimensions
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA
Roll Back Angle
28°
Noise Level
Inside Cab**
83 dB(A)
83 dB(A)
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2)
**The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spe
Note (3)
***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Outside Cab***
104 dB(A)
104 dB(A)
Operating Specifications
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA
Rated Operating Capacity with Optional Counterweight
3900 lb
1769 null
Service Refill Capacities
Diesel Exhaust Fluid (DEF) Tank
5 gal (US)
19 l
Weights
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA
Standard/Optional

Standard Equipment

ELECTRICAL
OPERATOR ENVIRONMENT
POWER TRAIN
OTHER
MANDATORY EQUIPMENT

Your time is valuable, and your business, much appreciated. Thanks for visiting our website. You can count on us for realistic answers to your equipment needs, state-of-the-art technology, experienced application specialists, flexible acquisition options and customized financing. We look forward to answering your questions.

Connect With Us!