Engine Power – Gross SAE J1995* (FWD/REV)
Engine Power – ISO 14396 (FWD/REV)
Engine Power – Net SAE J1349/ISO 9249 (FWD/REV)
*Excludes all fan losses.
Width of Shoe
Ground Contact Area
Number of Carrier Rollers
Length of Track on Ground
3-speed planetary powershift
Transmission Clutch Diameter
Service Refill Capacities
Final Drives (each)
Roller Frames (each)
Pivot Shaft Compartment
Variable displacement piston
Bulldozer Relief Valve Setting
Tilt Cylinder Relief Valve Setting
Ripper (Lift) Relief Valve Setting
Ripper (Pitch) Relief Valve Setting
Combined Pump Output (Implement)
Falling Objects Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II.
Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008.
The exterior sound pressure level for the standard machine (ISO 6395) is 115 dB(A)/111 dB(A) (sound suppressed).
The operator equivalent sound pressure level (ISO 6396) is 77 dB(A)/74 dB(A) (sound suppressed).
Steering and Brakes
Hydraulically Applied Multiple-disc Steering Clutch
Spring Applied Multiple-disc Brake
Height (FOPS Cab)*
Height (Top of Stack)*
Length Basic Tractor with Drawbar
Length with Multi-Shank Ripper
Length with SU-Blade
Length with Single-Shank Ripper
Length with U-Blade
Overall Length SU-Blade and SS Ripper
Overall Length Basic Tractor
Width over Trunnions
Width without Trunnions (610 mm/24 in ES)
Drawbar Height (Center of Clevis)
Length of Track on Ground
Track Roller Frame
Net SAE J1349/ISO 9249 (FWD/REV)
*Includes grouser height for total dimensions on hard surfaces.
Engine ratings apply at 1,800 rpm.
Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required.
No derating (in FWD gears) required up to 4572 m (15,000 ft) altitude.
D10T2 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm/24 in ES shoes, and operator.
D10T2 Shipping Weight includes coolant, lubricants, 10% fuel, FOPS cab, fast fuel, and 610 mm/24 in ES shoes.
Pump output measured at 1,800 rpm engine speed.
Electro-hydraulic pilot valves assist operations of ripper and dozer controls.
Complete system consists of pump, tank with filter, oil cooler, valves, lines, and control levers.
Net SAE J1349/ISO 9249 DIN (FWD/REV)
Engine Power – Net SAE J1349/ISO 9249 DIN (FWD/REV)
Air Conditioning System
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent of 2.717 metric tonnes (3.0 tons).