HomeMachines/EquipmentNew MachinesDozersCat® D8T WH Waste Handler

Cat® D8T WH Waste Handler

Product Description

From pushing trash to spreading cover, and cell construction to closing, Cat® Waste Handlers are designed and manufactured from the frame up to take on the demands of landfill work.

Specifications
Us
Metric
Engine
Engine Model
Cat C15 ACERT™
Flywheel Power
335 hp
252 kW
Emissions
Tier 4 Final/Stage IV/Korea Tier 4
Net Power (Rated) – 1,900 rpm: ISO 9249/SAE J1349
312 hp
233 kW
Net Power (Rated) – 1,900 rpm: ISO 9249/SAE J1349 (DIN)
317 hp
233 kW
Net Power (Maximum) – 1,700 rpm: ISO 9249/SAE J1349
335 hp
252 kW
Net Power (Maximum) – 1,700 rpm: ISO 9249/SAE J1349 DIN
343 hp
252 kW
Bore
5.4 in
137 mm
Stroke
6.75 in
172 mm
Displacement
928 in3
15.2 L
Weights
Operating Weight
86710 lb
39366 kg
Operating Weight
Standard Waste Handler
86710 lb
39366 kg
LGP Waste Handler
91600 lb
41586 kg
Shipping Weight
Standard Waste Handler
73400 lb
33324 kg
LGP Waste Handler
77900 lb
35367 kg
Blades – Capacity (SAE J1265)
8 SU Landfill
25.6 yd3
19.6 m3
8 U Landfill
27.7 yd3
21.2 m3
8 SU LGP Landfill
28.9 yd3
22.1 m3
Blades – Width (over end bits)
8 SU Landfill
12.9 ft
3931 mm
8 U Landfill
13.9 ft
4251 mm
8 SU LGP Landfill
14.9 ft
4531 mm
Dimensions – Standard
Height (to top of roof-mounted precleaner)
145.2 in
3706 mm
Length Basic Tractor (with striker bars with two counterweights)*
206.4 in
5256 mm
Length of Basic Tractor (tag link trunnion to tip of rear grouser)*
183.0 in
4647 mm
Height of Grouser
3.1 in
78 mm
Track Gauge
82.0 in
2083 mm
Width of Tractor (over trunnions)
120.4 in
3057 mm
Without Trunnions (standard shoe width)
106.0 in
2693 mm
Machine Height (from grouser tip) – Exhaust Stack
136.7 in
3472 mm
Machine Height (from grouser tip) – EROPS (to top of railing)
140.4 in
3566 mm
Machine Height (from grouser tip) – Length of Track on Ground
126.2 in
3206 mm
Machine Height (from grouser tip) – Ground Clearance
24.1 in
613 mm
Note
*With the following attachments add: SU Blade 1844 mm/72.6 in; U Blade 2241 mm/88.2 in; Drawbar 406 mm/16.0 in.
Dimensions – Non-Suspended
Height (to top of roof-mounted precleaner)
145.2 in
3706 mm
Length Basic Tractor (with striker bars with two counterweights)*
206.4 in
5256 mm
Length of Basic Tractor (tag link trunnion to tip of rear grouser)*
183.0 in
4647 mm
Height of Grouser
3.1 in
78 mm
Track Gauge
82.0 in
2083 mm
Width of Tractor (over trunnions)
120.4 in
3057 mm
Without Trunnions (standard shoe width)
106.0 in
2693 mm
Machine Height (from grouser tip) – Exhaust Stack
136.3 in
3463 mm
Machine Height (from grouser tip) – EROPS (to top of railing)
140.7 in
3575 mm
Machine Height (from grouser tip) – Length of Track on Ground
128.3 in
3258 mm
Machine Height (from grouser tip) – Ground Clearance
23.8 in
606 mm
Note
*With the following attachments add: SU Blade 1844 mm/72.6 in; U Blade 2241 mm/88.2 in; Drawbar 406 mm/16.0 in.
Dimensions – LGP
Height (to top of roof-mounted precleaner)
145.2 in
3706 mm
Length Basic Tractor (with striker bars with two counterweights)*
206.4 in
5256 mm
Length of Basic Tractor (tag link trunnion to tip of rear grouser)*
183.0 in
4647 mm
Height of Grouser
3.1 in
78 mm
Track Gauge
92.0 in
2337 mm
Width of Tractor (over trunnions)
130.4 in
3311 mm
Without Trunnions (standard shoe width)
130.0 in
3302 mm
Machine Height (from grouser tip) – Exhaust Stack
129.7 in
3295 mm
Engine
Note
All non road Tier 4 Interim and Final, Stage IIIB and IV, and Korea Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations.
Note
Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
Transmission
1 Forward
2.1 mph
3.4 km/h
2 Forward
3.8 mph
6.1 km/h
3 Forward
6.6 mph
10.6 km/h
1 Reverse
2.8 mph
4.5 km/h
2 Reverse
5 mph
8 km/h
3 Reverse
8.8 mph
14.2 km/h
Dimensions – LGP
Machine Height (from grouser tip) – EROPS (to top of railing)
140.4 in
3566 mm
Machine Height (from grouser tip) – Length of Track on Ground
126.2 in
3206 mm
Machine Height (from grouser tip) – Ground Clearance
24.1 in
613 mm
Note
*With the following attachments add: SU Blade 1844 mm/72.6 in; U Blade 2241 mm/88.2 in; Drawbar 406 mm/16.0 in.
Engine
Note
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.5 kg of refrigerant which has a CO2 equivalent of 3.575 metric tonnes.
Standard/Optional

Your time is valuable, and your business, much appreciated. Thanks for visiting our website. You can count on us for realistic answers to your equipment needs, state-of-the-art technology, experienced application specialists, flexible acquisition options and customized financing. We look forward to answering your questions.

Connect With Us!